YBA Heritage CD200 CD Player User Manual

: June 3, 2024
: YBA

Table of Contents

YBA Heritage CD200 CD Player U
YBA Warranty Policy Information
Warranty Exclusions
Discovering your CD200: Front view
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

YBA Heritage CD200 CD Player U

YBA-Heritage-CD200-CD-Player-User-Manual-product

The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product enclosure which may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

This product is designed and manufactured to meet strict quality and safety standards. You should read all the safety and operating instructions before using the product. Retain the manual for future reference and adhere to all warnings in the manual or on the product.

WARNING
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The presence of electricity near water can be dangerous. Do not use the product outdoors or near any source of water for example next to a bathtub, washbowl, kitchen sink, in a wet basement or near a swimming pool, etc. Take care that objects do not fall and liquids are not spilled into the enclosure through any openings. Do not place this product on a bed, sofa, rug, or similar soft surface, or in an enclosed bookcase or cabinet, where ventilation may be impeded. We recommend a minimum distance of 100 mm (4 inches) around all sides and the top of the product to provide adequate ventilation. Be sure that the ventilation holes below and on the top cover of your product are neither covered nor obscured by any object or dust.

Locate the product away from naked flames or heat-producing equipment such as radiators, stoves or other appliances (including other electronic devices) that produce heat. The amplifier has been designed for use in moderate climates. You should never attempt to service the product beyond that described in this manual. All other servicing should be referred to qualified service personnel. The only fuse used in this device is on the AC socket. Always use exactly the same fuse as the one provided with your unit. If an abnormal smell or smoke is detected from the product, turn the power off at once and unplug the unit from the wall outlet. Contact your dealer immediately.

The product should be referred to qualified service personnel when

The power supply cord or plug is damaged
The product has been dropped or the enclosure has been damaged
Objects have fallen, or liquid has been spilled, into the product
The product has been exposed to moisture
The product does not appear to function normally or exhibit a marked change in performance We thank you for your purchase of our YBA Heritage product. We have many years of listening pleasure.
YBA Heritage products have been manufactured with the same pride and attention to detail as every other product made since our creation in 1981. Your new product will give you the very best audio quality.
This user manual has been designed to give you all the information you need to install, connect, set up, and use your product. For your own safety and to ensure that no damage occurs, we strongly recommend that you read the safety guidelines carefully before installation.
It is our recommendation that you use a rack or stand that is recommended for use with audio equipment. If your equipment is on a portable rack it should be moved with great care, to avoid any accidents.
It is always advisable to unplug the unit from the main supply before cleaning. The casework should normally only require a wipe with a soft, damp, lint-free cloth. Do not use paint thinners or other chemical solvents for cleaning or furniture cleaning sprays or polishes as they can cause indelible white marks.
Only connect the product to a power supply of the type described in the operating instructions or as marked on the rear panel. Be sure to check the noted voltage. Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Only use the power supply cord supplied with your product.
Unplug the power cord or switch it off if left unused for a long period of time.
This product has been designed to meet the IEC 60065 international electrical safety standard as well as CE and RoH regulations. The pictorial “crossed-bin” means the equipment must not be thrown with ordinary wastes but must be collected for reuse, recycling, and other forms of recovery. If no longer required it must therefore be deposited in an appropriate collection point.
YBA is a registered trademark of YBA SAS and is restricted for use by YBA, its subsidiaries and authorized agents. All other brands and product names quoted in this manual are registered trademarks and the property of their respective owners.
Disclaimer: All the information contained in this manual was correct at the time of publication. However, as our engineers are always updating and striving to improve our products, your amplifier may have a slightly different appearance, performance, or modified functionality than presented in this manual.

YBA Warranty Policy Information

YBA warrants this product to be free from defects in materials and workmanship subject to the following: The warranty period may vary from country to country and according to local regulations. Consult your dealer or distributor to confirm the warranty duration in your country. YBA will repair or replace this product (at YBA’s sole option) or any defective parts in this product within the terms of the warranty. YBA warranty applies to the original purchaser only. Always ensure that you retain the valid proof of purchase. YBA shall not be liable for any incidental or consequential damages for breach of any express or implied warranty in this product. Except to the extent prohibited by law, this warranty is exclusive and in lieu of all other express and implied warranties. YBA warranty does not affect your statutory rights.

Warranty Procedure
To obtain warranty service, please contact the YBA authorized dealer from whom you purchased this product. Your dealer will deliver the product to the registered YBA service center. Shipping to the service center is at your cost and your amplifier must be packed in either its original carton or packaging affording an equal degree of protection.
Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the warranty period, must be presented to obtain warranty service. This warranty is invalid if

the factory-applied serial number has been modified, altered or removed from this product
this product was not purchased from a YBA-authorized dealer
the product shows any evidence of repair or attempts to repair not performed by a YBA-authorized service center.

Warranty Exclusions

Maintenance and service or replacement of parts due to normal wear and tear
Problems arising from the misuse of the product or use of this product for non-domestic use
Damage to the outer chassis due to normal or abnormal wear and tear
Faults caused by extreme situations (such as damage due to lightning, floods, moisture, or fire…)
Faults caused as a result of a short-circuit on the loudspeaker outputs
Faults caused by shock or the result of the product being dropped
Damage or defects caused by the use of inadequate packing during return to an authorized service center Faults caused by other devices or accessories such as power cords,
power filters, loudspeakers
Damages due to repairs, modifications or cleaning by non-approved technicians or due to the use of non-YBA parts
Faults due to unauthorized opening or tampering with the unity complete or partial loss of data/files

CAUTION
Before connecting any input or output…..Always make sure your CD200 is in the OFF position. If you have any doubts, unplug the AC power cable from the wall. Make sure any components connected to your CD Player are off. Neatly arrange and organize wiring to and from your CD200 and to and from all your components. Separate AC wires from audio cables to prevent hum or other unwanted noise from being introduced into the system.

Discovering your CD200: Front view

YBA-Heritage-CD200-CD-Player-User-
Manual-fig-1

ON/OFF switch: Use this button to switch ON or switch OFF your CD200.
ON/OFF: Press this button to switch the CD On/Standby.
STOP/PLAY PAUSE: To open or close the drawer push the key to the Stop position. If you push the key up while a disc is playing, reading will Stop. Push the key up when the disc is stopped and it will be ejected. Push the key down to start reading the disc. If you push the key down while a disc is playing, it will Pause. Push the key down again to resume playing.
Push the k2 ey up to return to the previous track. Push the key down to access to next track.
SOURCE selector: Select between the four different inputs.
DISPLAY and IR sensor: Any information concerning your CD200 remote control to this zone to control your CD200 from a distance.
CD DRIVE: Push the Stop/ Play Pause button up to the stop position to open the CD drawer. Place the CD in the space provided. Push the Stop/ Play Pause button up to the Stop position to close the drawer. Push the same key down to start reading the disc.

Discovering your CD200: Rear view

Balanced Audio output: This is a higher quality output that can reject noise and interference in the cable when used with equipment with balanced inputs. XLR connectors should be wired: Pin 1 – Ground; Pin 2 – Hot (in-phase); Pin 3 – Cold (phase-inverted).
RCA Audio output: Connect your amplifier (or any other suitable device such as powered speakers, receiver, etc) to the RCA outputs of your CD200.
Coaxial digital output: The digital coaxial output allows you to connect an external DAC or a digital recorder.
Coaxial digital input: Connect here any digital source with a high-quality COAXIAL interconnect cable (75Ω ) designed specifically for digital audio use.
USB input (type B): The USB input allows a direct connection to a PC/Mac; The CD200 operation is fully independent of your computer’s built-in soundcard and will operate whether your computer has a soundcard or not.
Optical digital input: Connect to optical output from a digital audio source by an optical cable.
Upgrade port: For service and future improvements. Not for use by end-users.
Power inlet: Use the main cable provided with your CD200. Be sure the switch is in the OFF position before plugging or unplugging the mains cable.

Using your YBA Remote Control
Note: PRESS means a short press on a key while HOLD means to keep the key pressed for more than 3 seconds. Always point the remote towards the IR window of your CD200

Select the device you want to control between AMP, CD and AUX. To control the CD200, you need to select the CD button. Note that the CD will remain the active function until you select another device.
SOURCE+/SOURCE-: Use the key to cycle between the 4 inputs of your CD200. (CD > COAX > OPTI > USB > CD)
VOLUME+/VOLUME-: Press + to increase volume, or – to decrease volume.
PREVIOUS/NEXT TRACK ( / ): Press to play the previous track or play the next track. Hold >3 seconds for fast forward or fastback.
PLAY/PAUSE: Press to toggle between play ( ) and pause (
VIEW: Press to change the track timing information (time from the beginning/time until the end). Hold (>3 seconds), and the display brightness dims. Hold again, the display turns off. Hold again, the display turns on.
STOP ( ): Press to stop playback. Note open and closing of the drawer can only be operated from the front panel control.
RANDOM Press to toggle between enable disable random play. Press and HOLD to select Repeat T track. Press and HOLD again to select Repeat A all.
AUDIO: Press to increase the sampling rate