Pioneer H D -CX Professional DJ Headphones Instruction Manual

Pioneer H D -CX Professional DJ Headphones

Safety precautions

Please read through this instruction manual so you will know how to operate your model properly.

AWARNING

• Adjust the headphone’s sound to the proper volume. Loud sounds may damage your ears.

• For traffic safety, never use headphones while riding a bicycle, motorbike, or while driving a car.
  It is dangerous to increase the sound volume too much because you cannot hear external sounds; take great care about traffic around you.
  CAUTION

• Never inspect the inside OR remodel this machine. The customer remodels this machine, AlphaTheta The corporation will no longer guarantee its performance.
  Precautions for use

• Caution should be observed during use, since adjustable parts may pinch the user’s hair, depending on the way in which headphones are used.

• Do not subject the headphones to strong forces or impacts, since damage could occur to the exterior appearance or product performance.

• When headphones are dirty, wipe with a dry, soft cloth. Take care not to blow into the speaker unit.

• Sound quality might deteriorate or sound maybe interrupted if the plug is dirty. Keep the plug clean by wiping it with a soft, dry cloth occasionally.

• Ear pads may degrade over long periods of use or storage. In this event consult your dealer.

• If any itching or skin discomfort occurs during use, cease use immediately.

• Plug adapter out of the reach of children and infants. If accidentally swallowed, contact a doctor immediately.
  The Safety of Your Ears is in Your Hands
  Get the most out of your equipment by playing it at a safe level — a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
  ESTABLISH A SAFE LEVEL:

• Set your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, without distortion.

• Once you have established a comfortable sound level, set the dial and leave it there.
  BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:

• Do not turn up the volume so high that you can’t hear what’s around you.

• Use caution or temporarily discontinue use in potentially hazardous situations.

• Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.

Attaching Detaching the cable

To attach the cable

1. Hold the convex part of the cable plug at the angle is shown in the diagram and insert the cable approximately 45 degrees clockwise to the position plug
2. Rotate the convex part of the cable plug approximately 45 degrees clockwise to the position plug. shown in the diagram to lock the cable

To detach the cable
Rotate the convex part of the cable plug approximately 45 degrees counterclockwise and then pull out the cable plug.

Note
The headphone plug of the cable supplied with this product is designed with a lock mechanism that makes it difficult for the cable to come off in the middle of DJ-ing but easy to plug and unplug
smoothly. The HDJ-X7, HDJ-S7, HDJ-X5, HDJX5BT, HDJ-CUE1 and HDJ-CUE1BT all have the same plug mechanism, making them compatible with this cable as well.

Earphone housing rotation

These headphones are designed to allow sound monitoring with one ear by rotating the opposite earphone housing (left or right) up and away from the ear.
To rotate the earphone on one side, hold the housing case and rotate it forward or back 90° away from the ear.

Rotation tightness (resistance) adjustment
The rotation resistance (tightness) can be adjusted by loosening or tightening the rotation adjustment screw as shown in the illustration.

• Rotation cannot be completely locked. Excessive tightening may result in damage to the unit.
• Be careful when loosening the adjustment screw as excessive loosening may cause the screw to fall out.

Plug adapter holder
The plug adapter holder can be used by attaching it to the cable.

SPECIFICATIONS

• Type ..Closed, Dynamic
• Impedance .. 32 Q
• Sensitivity .. 103 dB
• Frequency response …5 Hz — 30 000 Hz
• Maximum input power  ..2 000 mW
• Driver ..035 mm
• Plug .. 03.5 mm stereo mini-plug
• Cable.. One-side, Detachable
• Head cushion .. Nylon
• Ear pad  .. Nylon
• Weight..136 g
• Accessories. 1.2 m Coiled cable (extended length 3.0 m)
  • 1.6 m straight cable
  • 06.3 mm stereo plug adapter (threaded type)
  • Plug adapter holder
  • Spare ear pads (1 pair)

Informational Note for Customers in U.S.A. Only:
IMPORTANT NOTICE
THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT ARE ON THE SPEAKER.
RECORD THESE NUMBERS ON YOUR ENCLOSED WARRANTY CARD AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>