COREMORROW E01.SC6 Gain Regulator User Manual

: June 3, 2024
: COREMORROW

Table of Contents

Declaration
Overview
Function
Appearance
Technical Data
Interface
Gain Adjustment
Contact Us
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

E01.SC6 Gain Regulator
User Manual
Versions：V1.0 Date：2021-12-29 COREMORROW E01 SC6 Gain
Regulator This document introduces below product:
E01.SC6

Declaration

Declaration ！
This manual is used for E01.SC6 gain regulator, before use, please read this manual in detail.Please according to this instruction to operate the product, if you have any question, please contact with CoreMorrow for technical support. If you fail to operate in accordance with this manual or disassemble and modify the product yourself, CoreMorrow will not be liable for any consequences arising thereform.
Please read the following to avoid personal injury and prevent damage to this product or any other products connected to it. In order to avoid possible hazards, this product can only be used within the specified range.

Notice ！

Do not touch any exposed ends of the product and its accessories.
Do not open the case privately.
Do not plug in or out the input, output, or power cord when the power is on.
Please keep the surface of the product clean and dry, and do not operate in a high humidity or high static electricity environment.
When switching the output of the gain regulator, please turn off the power supply of the gain reg- ulator first.

Danger ！

Pay special attention if you connect products other than our company, please follow the general accident prevention regulations.

Warning ！

If the change or maintenance of the instrument is not carried out by the personnel expressly auth
orized by CoreMorrow, CoreMorrow will not assume any responsibility for improper maintenance or incorrect use.
Changes or maintenance must and can only be performed by personnel expressly authorized by CoreMorrow. For maintenance, only original parts can be used.

Overview

1.1 Characteristics

Small size;
21.6V to 26.4V power supply;
Analog input range 0 to 10V;
6 channels;
4 gain selectors for each channel.

1.2 Application

Used for gain adjustment of analog input of piezo controller.

1.3 Order information
This product is customized according to user’ s requirements:

Gain/adjustment 0~10Voutput (in default)；
Gain/adjustment 0~9.33V output；
Gain/adjustment 0~6.66V output；
Gain/adjustment 0~2.66V output.

Function

COREMORROW E01 SC6 Gain Regulator - fig

Appearance

COREMORROW E01 SC6 Gain Regulator

Technical Data

Types	E01.SC6
Power supply	Input voltage
Static consumption	<1W
Input	Interface
Channels	6
Nominal analog input	0 to 1V
Output	Interface
Channels	6
Nominal analog output range (4 gain selectors for each channel)	1 0-10y;

2 0-9.33V;
3 0-6.66V;
4 0-2.66V;
Appearance| Size| 129mmx84mmx32mm
Mass| 485g

Interface

Panel Introduction COREMORROW E01 SC6 Gain Regulator - fig
1

No.	Function	Description
1~6	Analog input	1~6 channel analog input
7~12	Analog output	1~6 channel analog output
13	Power supply	The power connector socket, connected through a power

Gain Adjustment

E01.SC6 gain regulator features 6 channels input and 6 channels output, there are 4 gain selectors for each channel, and 1 to 6 channel gain DIP switch is in sequence coresponding to S1 to S6. Gain selectors are shown in blow. COREMORROW E01 SC6 Gain Regulator - fig 2