LIVINOX LCH-EBONY-90BL Side Suction Range Hood User Manual
- September 29, 2024
- LIVINOX
Table of Contents
LCH-EBONY-90BL Side Suction Range Hood
“`html
Specifications
- Model: LCH-EBONY-90BL
- Speed Control: 3 or 4-speed mechanical/electronic controls
- Intended Use: Household use only
Product Usage Instructions
Safety Instructions
-
Ensure adequate ventilation in the room when using the range
hood with gas/fuel burning cooking appliances. -
Ensure proper exhaust of gases through the flue of fuel burning
appliances. -
This appliance is not intended for use by individuals with
reduced physical, sensory, or mental capabilities. -
Do not vent exhaust air into enclosed spaces within walls,
ceilings, attics, or crawl spaces.
Installation
-
Installation or repair must be done by a qualified
technician. -
Do not modify any part of the appliance.
-
Ensure good and permanent ventilation in the installation
location. -
For ducted mode, provide permanent air inlets and do not
discharge air into ducts used for other appliances. -
Maintain a distance of at least 60cm between the bench and the
lower part of the hood.
Electrical Cord
-
Avoid exposing the electrical cord to heat, chemicals, or sharp
objects. -
If the cord is damaged, have it replaced by the manufacturer or
a qualified electrician.
Hood Description
- Use low speed for simmering, medium for light cooking, and high
speed for frying or heavy cooking.
Instructions for Use
Touch control (LCH-EBONY-90BL):
To activate Turbo mode, press the button. The indicator blinks
three times, the fan operates at the highest speed (F4 on LED
screen). After 3 minutes, it switches to high speed. Press again to
stop the motor and switch off the indicator light.
FAQ (Frequently Asked Questions)
Q: Can this appliance be used in commercial applications?
A: No, this product is designed for household use only.
Q: What should I do if I smell gas while using the range
hood?
A: Immediately turn off the appliance, ventilate the area, and
contact a qualified technician to inspect for gas leaks.
“`
User Manual
LCH-EBONY-90BL
1
From the Manufacturer
Please read this user manual carefully before attempting to operate the
appliance and keep it in a safe place for future reference. This appliance and
its packaging are produced by processes that minimize waste and respect the
environment. Please help us to continue this effort to protect the environment
by using the appliance efficiently and dispose of the packaging in a
responsible manner.
FOR THE USER
1. Safety Instruction
Warning
PLEASE READ THIS SECTION THOROUGHLY BEFORE ATTEMPTING TO OPERATE THE APPLIANCE
1.To ensure adequate ventilation in the room when the range hood is in use at
the same time as gas/fuel burning cooking appliances (this is not applicable
to appliances that only discharge the air back into the room).
2.There is a fire risk if cleaning is not carried out in accordance with the
instructions. 3.To avoid using food products that produce flame under the
range hood. 4.Do not “flambé” food (is a cooking procedure in which alcohol is
added to a hot pan to create a burst of flames)
under the range hood. 5.Sufficient air is needed for proper exhausting of
gases through flue (chimney) of fuel burning appliances. 6.This appliance is
not intended for use by persons (including children) with reduced physical,
sensory, mental
capabilities, lack of experience and knowledge. 7.To reduce risk of fire and
to properly exhaust air and to ensure to duct air outside. Do not vent exhaust
air into
spaces within walls, ceilings, into attics and crawl spaces.
Installation
1. This appliance must be installed or repaired by a qualified technician
only. 2. Do not modify any part of this appliance by yourself. 3. To ensure
the location in which this appliance is installed has good and permanent
ventilation. 4. In ducted mode, there must be one or more permanent air inlet.
The air collected must not be discharged into
a duct used to blow off smoke from other appliances fed with electricity. 5.
The distance between the bench to the lower part of the hood must not be less
than 60cm. 6. Use an electrical connector with earth that is correct for your
location. 7. To check the voltage in your area correspond to the appliance as
indicated on the rating label. 8. Do not connect the hood to a duct that
carries combustion fumes (e.g. fireplace).
Intended For Household Use
1.This product is designed for household use only and should never be used for
commercial applications. 2.After use, always ensure that all controls are in
the “OFF” position. 3.When frying with a gas flame, take particular care not
to allow the oil or grease in the pan to catch fire.
2
Cleaning, Maintenance & Service It is very important to clean and maintain the
grease filters regularly (at least once monthly) to improve its efficiency in
eliminating heat and contaminated air in the kitchen. Heavy oil deposits is a
fire hazard. Hood surface should be cleaned with soft cloth and non-corrosive
detergent. Important: Never attempt to repair this appliance by yourself.
Always refer to qualified Service Technicians. For safety precaution, always
purchase the original replacement parts. Always switch off the power and
unplug the connection before conducting maintenance or cleaning.
Electrical Cord 1.To ensure the electrical cord is not exposed to heat,
chemical or sharp objects. 2.If the electrical cord is damaged, it must be
replaced by the manufacturer or its service agent or qualified
electrician.
2. Hood Description
Ducted or Re-circulating mode Depending on your requirement, this appliance
can be configured to operate in the ducted or re-circulating modes. DUCTED
MODE: Fire proof ducting system of 160mm or 180mm diameter vent the fumes
through a suitable outlet. In the ducted mode, only the aluminum grease
filters are installed. RECIRCULATING MODE: Fumes are filtered for grease and
odour through the aluminum grease filters and the charcoal filters
respectively and re-introduced into the kitchen environment. In re-circulating
mode, both the aluminum grease filters and the charcoal filters should be
installed.
Speed Control 1. The hood is equipped with a 3 or 4 speed
mechanical/electronic controls. 2. To use the low speed for simmering, medium
speed for light cooking. To use the high speed for frying or heavy cooking.
3
3. Dimension Diagrams 1) Side Suction Range Hood
LCH-EBONY-90BL
4. Instructions for use
A. Touch control(LCH-EBONY-90BL)
Press Turbo,The indicator blinks three times,its indicator light is on and the
fan is at booster/highest speed (LED Screen shows “F4″). After running for 3
minutes, it will automatically switch to high speed state. Press again, the
motor will stop working, the indicator light will be off, and the range hood
will enter non-working state. 4
Press +,Press + once,The indicator blinks three times, the fan is working at
low speed (LED screen shows”F1”). Press C second ,The indicator blinks three
times, the fan runs at mid speed (LED screen shows “F2”). Press C third,The
indicator blinks three times ,the fan runs at high speed (LED Screen shows
“F3″). Press C fourth,The indicator blinks three times ,The display shows the
time,enter non-working state.
Press -,Press – once,The indicator blinks three times, the fan is working at
high speed (LED screen shows”F3”). Press C second ,The indicator blinks three
times, the fan runs at mid speed (LED screen shows “F2”). Press C third,The
indicator blinks three times ,the fan runs at low speed (LED Screen shows
“F1”). Press C fourth,The indicator blinks three times ,The display shows the
time,enter non-working state.
Press Auto Clean,In non-working state, press Auto Clean for 3 seconds, oil
removing function will operate for 10
minutes(The fan will automatically operate at high speed for 1 minute after
the 10 minutes cleaning
function. ). press Auto Clean for 3 seconds again,The indicator blinks three
times, turn off oil removing
function.
Press
,In non-working state, Press 3 seconds to set clock, the hour position on LED
screen twinkles then you
can use + and – to set hour. Press Settings once again, the minute position on
LED screen twinkles then
you can use + and – to set minute.
Press , turn on power. Press it again, turn off power.
Press ,In non-working/ working state,Press once, The indicator blinks three times,turn on the light. Press again,The indicator blinks three times, turn off the light.
Cleaning & Maintenance
ALWAYS SWITCH OFF AND UNPLUG FIRST! SURFACES: Wash with warm soapy water and a
soft sponge. Never use abrasive detergent, scouring pads, steel wool or
solvents on any part of this appliance as this will cause irreparable damage.
ALUMNIUM GREASE FILTERS: Wash in the dishwashers or soak the panels in a
degreasing agent for an hour, then rinse off and dry before reinstalling.
CHARCOAL FILTERS:(optional and not included in package) (only in re-
circulating model): Charcoal cannot be reused. They must be replaced with the
appropriate types once a year or depending on the frequency of appliance
usage. For this appliance to function effectively, regular maintenance is a
must. Clogged filters restrict airflow and may cause the motor to overheat.
5
5. Installation
1. Use suitable bolts to mount the appliance on a secure surface. 2. The
minimum distance between the supporting surface for the cooking vessels on the
hob and the lowest
part of the range hood. When the range hood is located above a gas appliance,
this distance shall be at least 65 cm. If the instructions for installation
for the gas hob specify a greater distance, this has to be taken into
consideration. 3. The location of the installation must have permanent
openings for ventilation. 4. Regulations concerning the discharge of air have
to be fulfilled. 5. It is strongly recommended that the hood to be installed
right over the exhaust air from cooking. 6. Do not install the outlet of the
pipe in the wind direction, which can prevent the exhaust air from flowing
backward. 7. To fasten the components for the exhaust outlet with screws. To
ensure good ejection of exhaust air, the pipe must not be bended for too many
times.
Installation (Vent inside) 6
If you do not have an outlet to the outside, exhaust pipe is not required and
the installation is similar to the one show in section “Installation (Vent
outside)”.
Activated carbon filter can be used to trap odors. In order to install the
activated carbon filter, the grease filter should be detached first. Press the
lock and pull it downward.
Plug the activated carbon filter into the unit and turn it in clockwise
direction. Repeat the same on the other side.
7
FOR THE INSTALLER 6. Safety Information
1. Electrical connection must be in accordance with the local standards and
laws. 2. To ensure that the electrical supply in compliance with the appliance
setting, otherwise, do not
connect. 3. To ensure the power supply cord is free from any heat source or
sharp objects. 4. The electrical connection of this appliance must be soundly
earthed. In the event of electrical short
circuit, grounding reduces the risk of electrical shock. If unsure, contact a
qualified electrician. 5. Replacement of lamp must not exceed 20W. 6. LED lamp
must not exceed 1.5W/7W.
Wire Color Codes: Green & Yellow = EARTH Blue = NEUTRAL Brown = LIVE
8
7. Trouble shooting
Problems Not function
Possible Cause No power supply
Action Check that the main switch is turned on
Check that the plug is connected
Poor airflow
Aluminum grease filters clogged Clean the filters and replace when dry Charcoal grease filters clogged Replace charcoal filters with new sets
Motor running but no airflow
Butterfly valve jammed
Contact technician
Motor cuts after a few minutes
High temperature safety device The kitchen is not sufficiently
activated
ventilated
The hood is installed too near The hood must be at least 65cm from
the cooking stove
stove
Strong cooking smell
Charcoal filters must be installed in reCharcoal filters are not installed
circulating mode
Oil dripping onto stove
Remove aluminum filter and replace oil Oil cup missing or not installed
cup
aluminum grease filter saturated Wash the aluminum grease filters
Whirring sound
Foreign object in contact with fan Contact technician
blade
9
10