Lorelli PRINT 1.0 My Place Playpen Baby Cots For Rest Instruction Manual
- September 29, 2024
- lorelli
Table of Contents
Lorelli PRINT 1.0 My Place Playpen Baby Cots For Rest
Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device.
SAFETY REQUIREMENTS
- Do not place the playpen close to an open fire or other heat source!
- Do not use the playpen without the base!
- Ensure that the playpen is fully erected and all the locking mechanisms engaged before placing your child in this playpen!
- The playpen is intended for a child up to 3 years!
- Do not leave anything in the playpen which could provide a foothold or create a danger of suffocation or strangulation!
- All assembly fittings should always be tightened properly!
- Do not use the playpen if any part is broken, torn or missing and use only spare parts approved by the manufacturer!
- Accessories which are not approved by the manufacturer shall not be used!
- Do not use the playpen without a pad!
- Images on the title page and in the instruction manual are only illustrative and may differ from the real product.
- Use the playpen according these instructions!
- Before using the product for the first time, remove all advertising material from it as well as the materials used to attach them to the product.
MAINTENANCE AND CARE
- ATTENTION If you use the playpen outdoors, please clean all parts throughly after each use.
- Cleaning. To clean use soapy water or soft cleaning detergent. Handwash the bag with soapy water. Do not iron. Do not bleach.
- ATTENTION Do not put bulk objects in the playpen that can help the baby to jump out from the playpen. Do not place the playpen near heating devices because it will damage the plastic and fabrics.
- ATTENTION Use the playpen regarding to these instructions!
PARTS
Picture A
- Playpen -1.pc.
- Pad -1.pc.
- Bag -1.pc.
- Roof -1.pc.
ASSEMBLING OF THE PLAYPEN
-
Unpack the playpen from the bag. (picture 1)
-
Put away the pad which is placed around the playpen by unsticking the three soft bonds. (picture 2)
-
Unfold the playpen at half. (picture 3)
-
Catch the middle part of the two parallel upper tubes and lift it up till the mechanism situated in the middle of the tube is locked. In the same time the vertical tubes (playpen legs) should be close to each other at its lower end and the middle part of the cot should stay at upper position. This provides the easy locking of mechanism. (picture 4)
-
Repeat the same procedure with the rest of the upper tubes. Check if the lockers of each one are well locked by slightly pressing downwards the middle part of the tube.
-
Press downwards the middle par of the playpen till the lower tubes are straightened and locked. Then the all sides are straightened and stabled. (picture 5)
-
Unfold the pad and put it on the bottom of your playpen. (picture 6)
Insert the Velcro strips in two openings at both sides of the bottom. (picture 6A)
Stick the Velcro strips tightly. (picture 6B) -
The playpen it is ready to be used now. (picture 7)
DISASSEMBLING OF THE PLAYPEN
To dismantling the playpen, repeat the same steps as in mounting in the reverse order:
- remove the pad;
- lift the bottom by using the knot in the middle;
- pull the trigger’s mechanism to unlock it ( for both tubes), then release the arm downward;
ATTENTION For easier unlock of the mechanism by pressing the buttons you need to lift the tube up. The hard pushing of the tube downward with locked mechanism leads to serious damage!
Didis Ltd.
Bulgaria, Shumen, 6 Trakia-iztok Street
Phone : +359 54 850 830
e-mails: home.market@didis-ltd.com
export@didis-ltd.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>