izone 210 Nite Controlleer User Guide

210 Nite Controlleer

“`html

Specifications:

• Product Name: iZone Nite Controller
• Manufacturer: iZone Pty Ltd
• Design: Subject to change without notice

Product Usage Instructions:

1. Home Screen Options

To adjust the set point, use the navigation arrows to raise or
lower it. You can choose to use the return air sensor or the Nite
controller as the controlling temperature sensor. Once the sensor
and set point match, the unit will cycle off.

Fan Speed: Select from High, Medium, or Low. Mode Control
options include Cool, Heat, Vent, and Dry.

2. Zone Menu Options

Click the zone button to enter the zone menu. Use navigation
arrows to switch between zones. Adjust Airflow by selecting a zone
and choosing airflow percentage from 5% to 100% at 5% increments.
Open or Close a zone as needed.

3. Settings Menu

To access the Settings Menu, go to the home screen and press and
hold the Open button for 3 – 5 seconds. Only qualified installers
should configure the system to avoid damage. Use navigation arrows
to navigate the menu, Open button to make changes, and arrows to
select settings.

4. Settings Menu Options

No. of zones: Current number of connected zones (0-6). Constant
Zone selection (Fixed constant or Zone 1). Choose the temperature
sensor for control.

FAQ:

Q: Can I adjust the airflow for individual zones?

A: Yes, you can adjust the airflow for specific zones by
selecting the zone and choosing the desired airflow percentage.

Q: How do I change the controlling temperature sensor?

A: In the Settings Menu, navigate to Temp sensor option and
select the desired sensor for temperature control.

“`

User Guide
iZone Nite Controller
IZone Pty Ltd reserves the right to change or modify the design, specifications, software, hardware, firmware or Apps at any time without prior written or oral notice. Images and functions in this manual should be considered
as indicative only and may differ from the actual controller or Apps

Page 1

Table of contents
Section

Description

1.0 User Manual
1.1 Home Screen Options 1.2 Zone Menu Options 1.3 Settings Menu 1.4 Settings Menu Options 2.0 Warranty registration 2.1 IZone Manufacturer’s warranty against defects 3.0 Further assistance

Page No.
3 4 5 6 7 8 9 10
Page 2

1.0 – User Manual for iZone 210 Nite Controller

System Name
Set Point: See page 4
AC unit state: On/Off
Zone Menu: See page 5

Adjust Airflow

Open Zone *Settings Menu: See page 6

Close Zone

System Time
Fan Speed: High / Med / Low
Mode Control: Cool / Heat / Vent / Dry Navigation Arrows
Page 3

1.1 – Home Screen Options
Set Point: To adjust the set point, simply use the navigation arrows to raise or lower the set point.
You can choose to use the return air sensor or the Nite controller as the controlling temperature sensor. (see page 7) Once the sensor and the set point match, the unit will begin to cycle off.
When the sensor and the set point begin to drift apart the unit will cycle on.
Fan Speed: These are normally High / Medium / Low, however some brands do have less speed options and some have more.

Mode Control: Cool: The AC unit will blow cold air to reach the desired set point.
Heat: The AC unit will blow hot air to reach the desired set point.
Vent: Only the fan will run, no additional cold or hot air.
Dry: The AC unit will blow cold air and the fan speed will be locked to low speed.

Navigation Arrows

Page 4

1.2 – Zone Menu Options
Zone Menu: Click the zone button to enter the zone menu.
Use the navigation arrows to change between zones.
Click the zone button again to leave the zone menu.
Adjust Airflow: Select the zone that you want to adjust the airflow for, then choose between 5% and 100% at 5% increments until you get the desired amount of airflow.

Open Zone: Select the zone you wish to open and then click this button.
Close Zone: Select the zone you wish to close and then click this button.

Navigation Arrows

Page 5

1.3 – Settings Menu
Settings Menu: To enter the settings menu, go to the home screen, then press and hold the Open button for 3 – 5 seconds until the Settings menu appears.
WARNING! Only qualified iZone installers should configure the iZone System.
Incorrect configuration could result in damage to your air conditioning unit and system.

Settings Menu: Use the navigation arrows to move up and down through the menu.
Click the Open button to make changes to the desired setting
Use the navigation arrows to select the new setting.
Click the Open button again to save the new selected setting.

Navigation Arrows

Page 6

1.4 – Settings Menu Options

No. of zones: The current number of zones connected to the system, between 0 and 6.
Constant Zone: Which zone is the fixed constant zone, either 0 (Fixed constant) or Zone 1.
Temp sensor: Choose which sensor will control the temperature.
R/Air: The built-in return air sensor within the indoor unit.
Remote: The built-in temperature sensor inside the Nite controller.

Set Time: Change the current time, the up arrow changes the hour and the down arrow changes the minutes, 24 hour clock.
Temperature: The current temperature reading from the Nite controller.
AC Module: The communication between the CPU and AC Module.
N/A: No AC unit module detected.
OK: AC unit module connected.

AC Unit: The communication between the CPU and AC indoor unit.
N/A: No communication to the indoor unit.
OK: Communication to the indoor unit detected.

: AC unit error code

Dampers: Displays if a zone motor has failed.
ER#: # is corresponding number of the zone motor that has failed.

WiFi: Detects if you are connected to the internet for control via the iZone Home App.
N/A: No Smart Hub, or Smart Hub not paired.
ER: Smart Hub paired, but no internet connection.
OK: Internet detected.
Firmware: Displays all connected devices, displays the firmware numbers and your unique system id number.

Page 7

2.0 Warranty registration
Your system is supplied with a standard 2 year warranty. To extend your warranty for a further 8 years you are required to complete this warranty registration form and email or post it to iZone along with a copy of your invoice, within 60 days of purchase. For terms and conditions please see section 2.1

Full Name:

Contact Phone number including area code: iZone System ID number (if applicable):

Email address :
If you have more than one iZone system, please include additional registration forms.

Address where the system is installed:

Date of final invoice:

/

/

Installation Company:

Proof of Purchase attached:

Yes

Signature

Date

Post or email your registration to : Izone Pty Ltd 40 King Edward Road, Osborne Park, WA 6017 Email: registrationdesk@izone.com.au

A copy of the invoice must be sent in with the Extended Warranty form to qualify for the Extended 8-Year Warranty. A failure to supply a copy of the invoice will result in ZERO years extension to the 2-year Warranty. Proof of purchase invoice must include date, price paid for the system, installer name and details, as well as the inclusions in the total install price.
Page 8

2.1 IZone Manufacturer’s warranty against defects

Manufacturer’s details

This manufacturer’s warranty against defects is given by iZone Pty Ltd ACN 606 666

942 (“us,” “we,” “our”).

Our contact details are as follows.

Business address: Unit 1, 40 King Edward Street, Osborne Park WA 6017

Telephone:

+64 8 6556 6415

Email: supportdesk@izone.com.au

What products are covered by this warranty? This warranty applies to all new products manufactured by us (“Products”), and sold by us or our authorised distributors, resellers or dealers, unless expressly excluded by us.

To whom is this warranty given? This warranty is given to the original purchaser of the Products (“you,” “your”). You may only transfer or assign the benefit of this warranty with our prior written consent. This warranty is otherwise non-transferrable. We may transfer or assign our rights and/or obligations under this warranty at our sole discretion.

Application and warranty period Subject to any separate warranty given by us with respect to commercial projects, we warrant that our Products shall be free from all operational defects due to faulty design, materials and/or workmanship for a period of two (2) years from the date of purchase. You may receive an extended warranty if you properly register the Product by completing, and providing to us, the registration form supplied in Product user manual or by downloading a copy of the registration form from our website. If you have properly registered the Product, we warrant that the Product shall be free from all operational defects due to faulty design, materials and/or workmanship for a period of eight (8) years from the date of purchase. Registration must be completed within sixty (60) days of the date of purchase. All invoices must be paid in full before any warranty claims can be accepted by us and all warranty claims must be made within the warranty Period.

No extension to warranty period Repairs and/or replacements carried out under this warranty will not extend the warranty period, nor will they result in the warranty period being restarted, nor a new warranty period being initiated. The warranty period for any replacement parts or new Products installed will end upon the expiration of the initial warranty period.

Our obligations under this warranty

At our election, and subject to the terms of this warranty, we will either repair or

replace the Products, if:

We consider that the Products have a defect caused by faulty design,

materials, or workmanship; and

you make a claim under this warranty within the warranty period, and

in the manner set out herein.

We reserve the right to charge a service fee to inspect any Products that are the subject of a claim under this warranty. If we, or our authorised representative, inspect the Product and determine the Product to be defective, then we may, at our discretion, waive or refund the service fee (or a portion thereof).

What is covered under this warranty? This warranty covers Product defects directly resulting from faulty design, materials and/or workmanship.

What is expressly excluded from this warranty? For the purposes of this warranty, we will not be obliged to repair and/or replace any

Products as a result of defects attributable to damage caused by:

fair wear and tear (i.e. wear and tear attributable to ordinary, regular

use of the Products);

misuse, abuse, impact, neglect or accidents;

modifications, alterations or repairs made by any person other than us

or our authorised representatives;

exposure to chemicals;

excessive exposure to steam, moisture, heat or other climatic

conditions, including, without limitation, corrosive environments;

electrical power surges or electrical brownouts;

insects or animals;

natural events or disasters, including, without limitation, fire, high

winds, rain, hail and/or storms;

failure to follow any instructions or procedures with respect to

measurement, installation, operation, or adjustment of the Products;

misapplication of the Products or incorrect designed air-conditioning

or electrical systems; and

inadequate or improper cleaning and/or maintenance of the products

specified or recommended by us.

To the extent permitted by law, this warranty expressly excludes:

the costs of uninstallation and removal of the defective Products;

the costs of re-installing the repaired or replaced Products;

all freight, shipping, handling and other charges associated with the

return of the defective products or the delivery of the repaired or

replaced Products;

third party goods; and

damage to personal property, including without limitation, furniture,

carpets, walls, ceilings, foundations, vehicles or any other consequential

or indirect loss suffered either directly or indirectly as a result of defect

or malfunction of the Products, including, without limitation, loss of

profits, loss of revenue, loss of any contract value, loss anticipated

profits or damages for lost opportunity, whether under contract, in tort,

pursuant to statute or otherwise.

How to make a claim under this warranty

To make a claim under this warranty you must within seven (7) days of the discovery

of the defect (and, in any event, before the expiry of the warranty period) complete

and send to us or our distributor/agent the warranty claim form, which may be

downloaded from our website, accompanied by proof of purchase documentation

(and all other information reasonably requested by us to assess your warranty claim).

Upon receipt of your warranty claim form and proof of purchase documentation, we will contact you to determine the extent of the defect.

If there is a defect with the Product that is covered by this warranty, then we or our

distributor/agent will at our/their sole option:

require you, at your sole cost and expense, to have the defective

Product, or defective component part, delivered to us or our

distributor/agent; or

provided the site where the Product is located is located in the Perth

metropolitan area, send a service technician to effect repairs to or

replacement of the Product, save that the reasonable travel expenses

(including travelling time) of the technician must be paid by the

Customer.

You shall be responsible for all freight and other charges incurred in the return of a defective Product, or any defective component parts of a Product, to us or our distributor/agent for inspection or repair. You shall also be responsible for all freight and other charges incurred in the return of the Product from us or our distributor/ agent to you and we reserve the right to require payment of such charges prior to dispatching the Product or components. In order to complete repairs or replacement of a Product in accordance with the immediately preceding paragraph, we require safe and ready access to the site and each Product including, where required, via scaffolding and access panels. If we or our agent considers access to the site or Product to be unsafe or not readily available, we or our agent will not commence, or will cease all work to repair or replace the Product. All costs incurred in the obtaining of safe and ready access to the site and Product shall be payable by you. Any services requested by you outside of the scope of this warranty will be charged to in accordance with the following schedule of charges (“Charges”):
The Charges are subject to variation by us from time to time.

Description

Charge

Call out fee (inclusive of the first hour on site)

$165.00 (plus

Hourly labour rate (applicable after the first hour on site)

$100.00 (plus

Replacement parts shall be charged in accordance with our prevailing price list as at the date of supply. We will replace, or conduct repairs to, a Product as soon as practicable but will not be liable for any loss or damage caused by any delay. During transit, Products shall be at your sole risk.
This warranty is in addition to other legal rights you may have under the Australian Consumer Law The following section only applies if you are considered to be a `consumer’ for the purposes of the Australian Consumer Law, as set out in Schedule 2 to the Competition and Consumer Act 2010 (Cth). Our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. For major failures with the service, you are entitled: to cancel your service contract with us; and
to a refund for the unused portion, or to compensation for its reduced value. You are also entitled to choose a refund or replacement for major failures with goods. If a failure with the goods or service does not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not done you are entitled to a refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion. You are also entitled to be compensated for any other reasonably foreseeable loss or damage from a failure in the goods or services.

Page 9

Further assistance
1. If you require warranty or maintenance on your air conditioning system or iZone system you should contact your installation company
2. If you want to add more zones or temperature control to any zone you should contact your installation company
3. If you require assistance from the manufacturer contact:
iZone Pty Ltd 1/40 King Edward Road, Osborne Park, WA 6017 Email: supportdesk@izone.com.au Website: www.izone.com.au Phone: +61 8 6556 6415 Technical Website: www.izonepedia.com.au
Rev 1 — 16/02/23

Page 10

References

• iZonepedia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>