Siretta GPS 5G NR Industrial Router User Guide

GPS 5G NR Industrial Router

“`html

Product Specifications:

• Product Name: QUARTZ-ONYX 5G NR Industrial Router
• Model: GPS and Non-GPS Models available
• Accessories:
  • Ethernet Cable
  • Multi-Head Power Adapter
  • Cellular Antenna x4
  • WiFi Antenna x2
  • GPIO Connector
  • Power Cable and Connector
  • Magnetic Mount Antenna Extender x4
  • DIN Rail Adapter (with x2 screws)
  • Wall Mount Bracket (with x2 screws)
  • Optional: GPS Antenna (for GPS Model)

Product Usage Instructions:

Step 1: Insert SIM Card

Use a screwdriver to open the SIM cover on your router. Insert a
SIM card fully into the SIM slot. Close the SIM cover securely.

Step 2: Connect Antennas

Screw in the 4 magnetic cellular antenna extensions onto the
router. Connect the WiFi antennas as well. For GPS models, connect
the GPS antenna to the GPS connector.

Step 3: LAN Connection

Connect one end of the Ethernet cable to the router LAN port and
the other end to an Ethernet port on your PC.

Step 4: Power On

Plug in the green power connector on the power adapter cable
into the router. Select the appropriate power adaptor connector
based on your geographical location and plug it into the mains.

Step 5: LED Indication

Switch on the power. Refer to Table 1 for LED indications to
ensure proper power and network connection.

Step 6: Log In

Find the default IP address, username, and password on the
silver label on the back of your router. Enter the IP address in
your browser, and use the default credentials to log in. You can
later change these credentials in the router settings.

Step 7: APN Set-Up

After logging in, navigate to Basic Network > Cellular tab to
set up APN details for your network provider.

Frequently Asked Questions (FAQ):

Q: How can I reset my router to factory settings?

A: To reset your router to factory settings, locate the reset
button on your router and press and hold it for at least 10 seconds
until the router restarts.

Q: Can I use my own antennas with the QUARTZ-ONYX router?

A: Yes, you can use compatible antennas with the QUARTZ-ONYX
router, but ensure they meet the required specifications for
optimal performance.

“`

QUARTZ-ONYX
5G NR Industrial Router
Quick Start Guide
Rev 1.2

Whats in the Box?
This quick start guide is intended for the QUARTZ-ONYX router
GPS Model Non-GPS Model
Common Accessories
If you ordered a router with accessories, you will also receive the following items:

Ethernet Cable

Multi-Head Power Adapter

2

Cellular Antenna x4

WiFi Antenna x2

GPIO Connector

Power Cable and Connector

Magnetic Mount Antenna Extender x4

DIN Rail Adapter

Wall Mount Bracket

NOTE – Both the DIN Rail Adapter and Wall Mount Bracket are supplied with x2 screws.

3

Optional Accessories
If you ordered a QUARTZ-ONYX with accessories and opted for GPS, then you will also receive a GPS antenna.
GPS Antenna
Additional Items
You will require the following items for configuring your router: » SIM that is subscribed to a 5G service with APN details » Screwdriver to open the SIM cover » PC to configure the router
4

Step 1: SIM: Use a screwdriver to open the SIM cover on your router. Step 2: SIM: Insert a SIM card fully into the SIM slot. Close the SIM cover, ensuring it is screwed back into place. (SIM slot 1 is in use illustrated below)
5

Step 3: ANTENNA CONNECTIONS: Screw in the 4 magnetic cellular antenna
extensions onto the router. Twist the connector clock-wise until the extension is firmly connected. Repeat process for the 2 WiFi antennas onto the router (the cellular
antennnas must be attached to the magnetic antenna extension).

If you have a GPS router, connect the GPS antenna to the GPS connector on the router.

5G/GPS

WiFi-1
5G-1 5G-2 5G-3 5G-4 WiFi-2

Not used for Non-GPS model

WiFi-1
5G-1 5G-2 5G-3 5G-4 WiFi-2

6

Step 4: LAN CONNECTION: Connect one end of the Ethernet cable into the router LAN port, connect the other end of the cable into an Ethernet port on your PC.
Step 5: POWER: Plug in the green power connector on the power adapter cable into the router as shown below.
7

Step 6: POWER: Select connector type for your power adaptor depending on your geographical location (UK/EU/USA/AU). Plug the power adaptor to the mains.

Step 7: POWER: Switch on the power. See table below for LED indications when router is powered on.

Table 1. Router LED indication

Label

Indication

Signal 1 Signal 2 Signal 3

Green

Signal 1

Green

PWR

Green

WLAN

Green

ERR

Red

Solid
Blinking Solid
Off Solid Off Blinking Solid Off Solid

Meaning
Signal strength bar graph when connected to the Internet. Read highest lit LED. Signal 3: Strong (CSQ 20-31) Signal 2: Good (CSQ 11-19) Signal 1: Weak (CSQ 0-10)
Connected to cellular, obtaining IP address Online, connected to the Internet
No power applied to QUARTZ-ONYX QUARTZ-ONYX powered
WLAN not enabled Data transfer in progress Enabled, no data transfer in progress
Connected to Cellular network No cellular connection. See note below.

8

Step 8: LOG IN: Obtain the default IP address, username and password of your router. You can find this on the silver label on the back of your router. Type in the IP address of your router into your PC browser. When prompted for your username and password use the following:
These credentials are factory defaults. You can set your own user name and password in the router settings.
9

Step 9: APN SET-UP: On successful login, navigate to the Basic Network > Cellular tab.
When you arrive at the `Cellular Settings’ page, you will need to enter the APN details for the network provider of your SIM card.
In the image below, we have used the APN details relevant for “EE”. These being:

·

APN: everywhere

·

Username: eesecure

·

Password: secure

You are not required to enter any Proxy’ orPort’ details.

10

Step 10: CONNECTING TO NETWORK: Click “Save”. Your router will reboot itself. The router will then connect to the network and is ready for use with your application.
NOTE – If you cannot access the router GUI, please check your local area network settings.
Further Information
For more information when using your router, a range of application notes, hardware and software user manuals are available to download. You can request these from your Siretta representative, alternatively these can be downloaded from www.siretta.com
11

sales +44 (0)118 976 9000 email sales@siretta.com
www.siretta.com
Siretta Ltd Basingstoke Road Spencers Wood Reading Berkshire RG7 1PW United Kingdom
Company No. 08405712 VAT Registration No. GB163 04 0349

Rev 1.2

References

• Siretta - Cellular Modems, Routers, Signal Analysers, Antennas, Cables

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>