Siretta QUARTZ-GOLD Enabling Industrial IoT User Guide
- October 27, 2023
- Siretta
Table of Contents
Siretta QUARTZ-GOLD Enabling Industrial IoT
Whats in the Box
This quick start guide is intended for the Siretta QUARTZ-GOLD Series Routers
Common Accessories
If you ordered a router with accessories, you will also receive the following items
The QUARTZ-GOLD DIN Rail adapter does not come as a standard part of the accessories kit, but is available separately. Please specify when ordering
Optional Accessories
Additional Items
You will require the following items for configuring your router:
- 3G or 4G SIM card with APN details
- Paperclip or SIM card Removal Tool to eject the SIM tray
- PC to configure the router
NOTE – Please ensure your antenna and SIM card are appropriate for the router you are using
Step 1: Use a paperclip or Sim Card Removal Tool to eject the SIM tray on the router
Step 2: Insert a SIM card into the SIM tray. Close the SIM tray, ensuring it is seated back in place.
Step 3: ANTENNA CONNECTIONS: Screw the cellular antenna to the main antenna connector on the router. Twist the antenna connector clock-wise until the antenna is firmly connected
Connect the 2 Wi-Fi antennas marked “Wi-Fi1” and “Wi-Fi2” by twisting the
antenna connector clock-wise until the antenna is firmly connected.
If you have a GPS router, connect the GPS antenna to the GPS connector on the
router.
Step 4: LAN CONNECTION: Connect one end of the Ethernet cable into the router LAN port, connect the other end of the cable into an Ethernet port on your PC.
Step 5: POWER: Plug the green power connector on the power adapter cable into the router as shown below. Plug the 2.1mm centre pin connector from the plug-top power supply in to the other end of the power adapter cable
Step 6: POWER: Select connector type for your power adaptor depending on your geographical location (UK/EU/USA/AU). Plug the power adaptor to the mains.
Step 7: POWER: Switch on the power. See table below for LED indications when router is powered on
Table 1. Router LED indication
Table 1. Router LED indication continued
Step 8: IP ADDRESS: Obtain the IP address of your router. You can find
this on the silver label on the back of your router. Type the IP address of
your router into your PC browser. When prompted for your user name and
password use the following:
User name: admin
Password: admin
These credentials are factory defaults. You can set your own user name and
password in the router settings
Step 9: APN SET-UP: On successful login, navigate to the Basic Network >
Cellular tab.
When you arrive at the ‘Cellular Settings’ page, you will need to enter the
APN details for the network provider of your SIM card.
In the image below, we have used the APN details relevant for “EE”. These
being:
- APN: everywhere
- Username: eesecure
- Password: secure
You are not required to enter any ‘Proxy’ or ‘Port’ details
Step 10: CONNECTING TO NETWORK: Click “Save”. Your router will reboot itself. The router will then connect to the network and is ready for use with your application
NOTE – If you cannot access the router GUI, please check your local area network settings
Further Information
For more information when using your router, a range of application notes,
hardware and software user manuals are available to download. You can request
these from your Siretta representative, alternatively these can be downloaded
from www.siretta.com
sales: +44 (0)118 976 9000
email:sales@siretta.com
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire
RG7 1PW
United Kingdom
Company No. 08405712
VAT Registration No. GB163 04 0349
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>