LIVARNO home Decorative Foil Adhesive Film Furniture Walls Fenstern Albums Instructions

: September 28, 2024
: LIVARNO home

Table of Contents

LIVARNO home Decorative Foil Adhesive Film Furniture Walls Fenstern
Specifications
Product Usage Instructions
FAQ
Introduction
User instructions
Disposal
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LIVARNO home Decorative Foil Adhesive Film Furniture Walls Fenstern

Albums

Specifications

Model No. : HG10152A / HG10152B / HG10152C / HG10152D
Manufacturer : OWIM GmbH & Co. KG
Country of Origin : Germany
Version : 06/2024

Product Usage Instructions

Measure and clean the surface to be covered with the self-adhesive film.
Cut the film to size using the graduated gridlines.
If the surface is hard and smooth, spray a little water on it.
Peel the paper backing slightly from one corner and apply it to the surface.
Slowly peel off the paper while pressing the film with a wet tissue or smooth squeegee.
Work from the center towards the edges to avoid air bubbles.
Allow 24 to 48 hours for the film to dry completely before touching the surface.

FAQ

Q: Can the self-adhesive film be removed and reused?
A: The self-adhesive film is designed for one-time use only and may not adhere properly if removed and reapplied.
Q: How can I ensure a bubble-free application of the film?
A: To avoid air bubbles, ensure that the surface is clean, smooth, and slightly moist before applying the film. Work slowly from the center towards the edges while pressing out any air pockets with a wet tissue or squeegee.

Introduction

We congratulate you on the purchase of your new product. You have chosen a high-quality product. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the operating instructions and the safety advice below. Only use the product as instructed and only for the indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

User instructions

Measure and clean the surface to be covered with the self-adhesive film.
Cut as per the size using the graduated gridlines.
If the surface is hard and smooth spray a little water on the surface.
Peel the paper a little from one corner and apply it on one surface.
Slowly peel the paper and press the film with a wet tissue / smooth squeegee.
Move from the centre to the edges to avoid air bubbles.
Wait for 24 to 48 hours to dry before touching the surface.

IMPORTANT INFORMATION

The stickers are only suitable for smooth surfaces.

The selected surface must be free of grease, lime, and dust in order for the stickers to adhere well to the surface.
It cannot be completely ruled out that the adhesive layer and the surface bond caused the paint, or similar to come off as well when removing the sticker.
Do not remove the sticker by force.
Direct sunlight and fluctuating temperatures may further impact the surface. Discoloration cannot be ruled out.
If necessary, clean the stickers with a clean and slightly damp cloth. Carefully wipe the sticker and never use any cleaning agents.
Using a hair dryer can in many cases help to remove adhesive residues. Slightly heat the stickers and then carefully peel off. In order to remove heavy staining, sprinkle the affected area with warm water and then carefully remove it with a scraper.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.