RYOBI R36LTR10 Petrol String Trimmer User Manual

: September 27, 2024
: RYOBI

RYOBI R36LTR10 Petrol String Trimmer

Specifications

Model: R36LTR10
Intended Use: Cutting long grass, pulpy weed, and similar vegetation at or about ground level
Operation: Cordless
Intended Users: Adults who have read and understood the instructions
Usage Area: Outdoor, well-ventilated areas

Product Usage Instructions

Assembly

Read the user manual thoroughly before assembly.
Ensure all parts are included in the package.
Follow the step-by-step instructions for assembling the cordless line trimmer.

Operation

Charge the trimmer fully before first use.
Hold the trimmer with both hands for stability during operation.
Ensure the cutting plane is parallel to the ground surface for effective trimming.
Avoid using the trimmer for any purpose other than its intended use.

Maintenance

Clean the trimmer after each use to prevent debris buildup.
Store the trimmer in a dry place away from moisture when not in use.
Regularly inspect the trimmer for any signs of wear and tear and replace parts if necessary.

FAQ

Q: Can children use the cordless line trimmer?

A: No, the product is intended to be used only by responsible adults who have read and understood the user manual.

Q: Can the cordless line trimmer be used indoors?

A: No, the product is intended for outdoor use in well-ventilated areas only.

Q: How should I store the cordless line trimmer?

A: Store the trimmer in a dry place away from moisture and out of reach of children when not in use.

IMPORTANT!

You must read the instructions in this manual before assembling, operating, and maintaining the product.
Subject to technical modification.
Safety, performance, and dependability have been given top priority in the design of your cordless line trimmer.

INTENDED USE

The cordless line trimmer is intended for cutting long grass, pulpy weed, and similar vegetation at or about ground level.
The cutting plane should be approximately parallel to the ground surface when trimming.
The product is intended to be used only by adults who have read and understood the instructions and warnings in this manual and can be considered responsible for their actions.
The product is intended only for outdoor use in a well-ventilated area. For safety reasons, the product must be adequately controlled by a two-handed operation.
Do not use the product for any other purpose.

GENERAL PRODUCT SAFETY WARNINGS

WARNING! Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) product or battery-operated (cordless) product.

WORK AREA SAFETY

Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks that may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep the cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. The use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. The use of an RCD reduces the risk of electric shock.

PERSONAL SAFETY

Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to a power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of dust collection can reduce dust-related hazards.
Do not let familiarity gained from the frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories tool bits, etc. to these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause an explosion.
Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions.
Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

SERVICE

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

GRASS TRIMMER SAFETY WARNINGS

Do not use the machine in bad weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by lightning.
Thoroughly inspect the area for wildlife where the machine is to be used. Wildlife may be injured by the machine during operation.
Thoroughly inspect the area where the machine is to be used and remove all stones, sticks, wires, bones, and other foreign objects. Thrown objects can cause personal injury.
Before using the machine, always visually inspect to see that the cutter or blade and the cutter or blade assembly are not damaged. Damaged parts increase the risk of injury.
Follow instructions for changing accessories. Improperly tightened blade securing nuts or bolts may either damage the blade or result in it becoming detached.
Wear eye, ear, head, and hand protection. Adequate protective equipment will reduce personal injury by flying debris or accidental contact with the cutting line or blade.
While operating the machine, always wear non-slip and protective footwear. Do not operate the machine when barefoot or wearing open sandals. This reduces the chance of injury to the feet from contact with the moving cutters or lines.
While operating the machine, always wear long trousers. Exposed skin increases the likelihood of injury from thrown objects.
Keep bystanders away while operating the machine. Thrown debris can result in serious personal injury.
Always use two hands when operating the machine. Holding the machine with both hands will avoid loss of control.
Hold the machine by the insulated gripping surfaces only, because the cutting line or blade may contact hidden wiring.
Cutting lines or blades contacting a “live” wire may make exposed metal parts of the machine “live” and could give the operator an electric shock.
Always keep proper footing and operate the machine only when standing on the ground. Slippery or unstable surfaces may cause a loss of balance or control of the machine.
Do not operate the machine on excessively steep slopes. This reduces the risk of loss of control, slipping, and falling which may result in personal injury.
When working on slopes, always be sure of your footing, always work across the face of slopes, never up or down, and exercise extreme caution when changing direction.
This reduces the risk of loss of control, slipping, and falling which may result in personal injury.
Keep all parts of the body away from the cutter, line, or blade when the machine is operating. Before you start the machine, make sure the cutter, line, or blade is not contacting anything.
A moment of inattention while operating the machine may result in injury to yourself or others.
Do not operate the machine above waist height. This helps prevent unintended cutter or blade contact and enables better control of the machine in unexpected situations.
When cutting brushes or saplings that are under tension, be alert for springback. When the tension in the wood fibers is released, the brush or sapling may strike the operator and/or throw the machine out of control.
Use extreme caution when cutting brush and saplings. The slender material may catch the blade and be whipped toward you or pull you off balance.
Maintain control of the machine and do not touch cutters, line blades, and other hazardous moving parts while they are still in motion. This reduces the risk of injury from moving parts.
Carry the machine with the machine switched off and away from your body. Proper handling of the machine will reduce the likelihood of accidental contact with a moving cutter, line, or blade.
Only use replacement cutters, lines, cutting heads, and blades specified by the manufacturer. Incorrect replacement parts may increase the risk of breakage and injury.
When clearing jammed material or servicing the machine, make sure the switch is off and the battery pack is removed. Unexpected starting of the machine while clearing jammed material or servicing may result in serious personal injury.

ADDITIONAL SAFETY WARNINGS

Before use and after any impact, check that there are no damaged parts on the product. For a defective switch or any part that is damaged or worn, contact customer service.
The small blade fitted to the safety guard is designed to trim the newly extended line to the correct length for safe and optimum performance. The blade is very sharp. Do not touch the blade, particularly when cleaning the product.
Use only the manufacturer’s replacement cutting line. Do not use any other cutting attachment.
Make sure that the cutting attachment is properly installed and securely fastened.
Never operate the product unless all guards, deflectors, and handles are properly and securely attached.
Ensure that the line cut-off blade in the safety guard is properly positioned and secured before each use.
Keep the head attachment below waist level.
Immediately power off the product and remove the battery pack in the event of an accident or a breakdown.
Do not operate the product again, and contact customer service.
To reduce the risk of injury associated with contacting moving parts, always power off the product and remove the battery pack. Allow both to cool down. Make sure that all moving parts have come to a complete stop:
- before servicing
- before clearing a blockage
- before checking, cleaning, and working on the product
- before changing accessories
- before inspecting the product after striking a foreign object
- before leaving the product unattended
- before performing maintenance
- whenever the product starts to vibrate abnormally
Ensure that all guards and handles are properly fitted and are in good condition.
Hold the product by the designated handles, and restrict working time and exposure.
Beware of objects thrown by the cutting means. Clear debris like small stones, gravel, and other foreign objects from the work area before starting the operation. Wires or string may become entangled with the cutting means.
Always ensure that ventilation openings are kept clear of debris.
Injuries may be caused, or aggravated, by prolonged use of the product. When using the product for prolonged periods, ensure to take regular breaks.
Operate the product only in temperatures between 0 °C and 40 °C.
Store the product in a location where the ambient temperature is between 0 °C and 40 °C.
The product is fitted with a harness. Use the harness while operating the product. Carefully adjust the harness to fit comfortably and help support the weight of the product on your right side. Identify the quick-release mechanism and practice using it before you start using the product. Its correct use may prevent serious injury in case of an emergency. Never wear additional clothing over the harness or otherwise, that restricts access to the quick-release mechanism.
Do not wear multiple belts or shoulder harnesses.

ADDITIONAL BATTERY SAFETY WARNINGS

To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse the product, battery pack, or charger in fluid or allow fluid to flow inside it. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.
Charge the battery pack in a location where the ambient temperature is between 10 °C and 38 °C.
Store the battery pack in a location where the ambient temperature is between 0 °C and 20 °C.
Use the battery pack in a location where the ambient temperature is between 0 °C and 40 °C.

TRANSPORTATION AND STORAGE

Power off the product, and remove the battery pack. Make sure that all moving parts have come to a complete stop. Allow the product and the battery pack to cool down before storing or transporting.
Remove all foreign materials from the product.
Do not store or transport the product with the battery pack fitted. Remove the battery pack, and secure it separately. Store the product in a cool, dry, and well-ventilated place that is inaccessible to children. Keep the product away from corrosive agents, such as garden chemicals and de-icing salts. Do not store the product outdoors.
When transporting the product in a vehicle, secure it against movement or falling to prevent injury to persons or damage to the product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery pack under local and national provisions and regulations.
Follow all special requirements on packaging and labeling when transporting batteries by a third party. Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, non-conductive caps or tape. Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.

MAINTENANCE

Use only the original manufacturer’s replacement parts, accessories, and attachments. Failure to do so can cause possible injury, can contribute to poor performance, and may void your warranty.
Power off the product, and remove the battery pack. Allow both to cool down. Make sure that all moving parts have come to a complete stop before any cleaning or maintenance task.
You may make adjustments and repairs that are described in this manual. For other repairs, contact customer service.
For the replacement line, use only a nylon filament line of the diameter described in the specifications table of this manual.
After each use, clean the plastic parts with a soft, dry cloth. For any sign of damage, contact customer service.
Check all nuts, bolts, and screws before each use and at frequent intervals for proper tightness to ensure that the product is in safe working condition. For any sign of damage, contact customer service.
Contact customer service to replace damaged or unreadable labels.

SYMBOLS ON THE PRODUCT

SYMBOLS IN THIS MANUAL

OVERVIEW

R36LTR10

INSTALLATION INSTRUCTION

Always wear full eye, ear, and head protection, appropriate respiratory mask, non-slip heavy-duty gloves, and substantial footwear while operating the product. Do not operate the product when barefoot or wearing open sandals.
Push the lock button and remove the hanger cap from the lower shaft. Insert and turn the lower shaft into the upper shaft until the lock button clicks into place. Turn the knob clockwise to secure the lower shaft.
Place the front handle at the preferred position on the upper shaft. Align and insert the bolt through the holes under the front handle. Place the nut on the bolt, and turn the nut clockwise to tighten and secure the front handle.
Press and hold the lock-out trigger, and squeeze the on/off trigger to power the product.
Install the safety guard to the bottom side of the silver bracket on the lower shaft.
Insert the tab of the bracket into the opening on the safety guard. Align the screw to the hole on the safety guard, and turn the screw clockwise to secure the safety guard in place.
Remove the nut and bolt from the front handle. Turn the nut counterclockwise to loosen the handle lock.
Attach the harness to the harness hanger. Identify the quick-release mechanism and practice using it before using the product.
Install the battery pack until the latch clicks into place.

INSTALLATION INSTRUCTION/INFO

OPERATING THE PRODUCT

WARNING: For safety reasons, the product must be adequately controlled by a two-handed operation. Hold the product with the right hand on the rear handle and the left hand on the front handle.
WARNING: Consider the environment in which you are working. Keep the working area free from wires, sticks, stones, and debris, which if struck by the cutter can become thrown objects.
WARNING: Exercise extreme caution when using the product. Keep hands and feet away from the cutting means at all times, especially when turning on the motor.

Insert the battery pack until the latch clicks into place. Press and hold the lock-out trigger, and squeeze the on/off trigger to power the product.
- NOTE: Tap the bump knob on the ground to advance the line. The line advances each time the head is tapped. Do not hold the bump knob onto the ground.
- NOTE: The cut-off blade fitted to the safety guard is designed to trim the newly extended line.
  NOTE: For safe and optimum performance, the cutting line should extend to the cut-off blade.
For cutting ease and safety, cut the grass from one direction.
- NOTE: Cut tall grass from the top down. This prevents grass from wrapping around the shaft housing and bump heads, which may cause damage from overheating.
- NOTE: Cut grass from the right side to the left side for cutting ease and safety.

ADJUSTING THE CUTTING LINE

Press the battery latch and remove the battery pack.
Place the product on a level surface.
- Position the product with the motor side down and the blade guard side up.
Loosen the screws on the cut-off blade.
- Remove the blade. Rotate the blade 180º.
Install the blade. Tighten the screws to secure the blade into the new position.
- NOTE: The cutting width of the line trimmer can be adjusted according to preference.
- A cutting width of 38 cm gets the job done faster but results in a lesser runtime.

REPLACING THE CUTTING LINE

Press the battery latch and remove the battery pack.
Place the product on a level surface.
- Position the product with the motor side down and the blade guard side up.
Rotate the bump knob on the string head until the line on the center of the bump knob aligns with the arrows on the outer spool.
Use a 2.0 mm diameter line. Cut one piece of the line, approximately 3.0 m in length. Insert one end of the line through the eyelet on the side of the string head, and push the line until it comes out through the eyelet on the other side.
- Continue to push the line through the string head until the line is even in length on both sides.
Ensure that there are equal lengths of line on either side of the string head (max. 2.65 m per side). Rotate the bump knob with the speed winder to wind the line.
- NOTE: The bump knob can also be rotated by hand.
- NOTE: When reloading, the maximum line length on each side should be 2.65 m.
- NOTE: Wind the line until approximately 12 cm remains protruding from the trimmer head.
Insert the battery pack until the latch clicks into place.
Press and hold the lock-out trigger, and squeeze the on/off trigger to power the product.
- Tap the bump knob on the ground to advance the line. The line advances each time the head is tapped. Do not hold the bump knob onto the ground.
- NOTE: Tap the bump knob only on grass to prevent damage to the bump knob.
- NOTE: The cut-off blade fitted to the safety guard is designed to trim the newly extended line.

REPLACING THE STRING HEAD

Press the battery latch and remove the battery pack.
Place the product on a level surface.
- Position the product with the motor side down and the blade guard side up.
Align the slot on the string head assembly and string head, and insert the lock pin.
- Turn the string head clockwise to loosen and remove it.
With the lock pin still inserted in the slot, install the new string head and turn it counterclockwise to tighten.
Remove the lock pin from the string head assembly.

CLEANING THE PRODUCT

Press the battery latch and remove the battery pack.
Place the product on a level surface.
- Position the product with the motor side down and the blade guard side up.
- WARNING: The small blade fitted to the safety guard is designed to trim the newly extended line to the correct length for safe and optimum performance.
- The blade is very sharp. Do not touch the blade, particularly when cleaning the product.
Clean the product with a soft, dry brush.
- WARNING: Do not use water to clean the product.

STORING THE PRODUCT

NOTE: Clean the product before storing it.

Press the battery latch and remove the battery pack.
Store the product in a cool, dry, and well-ventilated place that is inaccessible to children. Keep the product away from corrosive agents, such as garden chemicals and de-icing salts. Do not store the product outdoors.

PRODUCT SPECIFICATIONS

REPLACEMENT PARTS

Replacement bump feed RAC1214
Replacement 2.0 mm trimming line RLTS2
NOTE: Visit your local special orders desk or contact RYOBI customer service for replacement parts.
WARNING! The declared vibration total values and the declared noise emission values given in this instruction manual have been measured by a standardized test and may be used to compare one tool with another.
They may be used for a preliminary assessment of exposure.
The declared vibration and noise emission values represent the main applications of the tool. However, if the tool is used for different applications, used with different accessories, or poorly maintained, the vibration and noise emission may differ.
These conditions may significantly increase the exposure levels over the total working period. An estimation of the level of exposure to vibration and noise should take into account the times when the tool is turned off or when it is running idle.
These conditions may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration and noise, such as maintaining the tool and the accessories, keeping the hands warm (in case of vibration), and organizing work patterns.

DISCLAIMER – Techtronic

Exposure to silica and other dust conditions can be a health risk. Organizations have legal responsibilities to protect the health of their workers.
Techtronic Industries Australia Pty Ltd, (ACN 002 277 509) (TECHTRONIC) considers the safety of all users of our products to be of paramount importance.
It is recommended that all users of ELECTRONIC products wear the correct personal protective equipment and clothing, use the appropriate dust extractor, including on-tool extraction, and otherwise follow all recommended dust suppression practices.
It is the responsibility of the purchasing customer to ensure that any dust extractor is suitable for the task and type of dust being collected. ELECTRONIC does not, and will not, recommend a dust extractor to customers.
ELECTRONIC recommends a risk assessment be carried out by the purchasing customer, or an independent third-party specialist, to ensure any dust extractor is fit for the purpose intended by the customer before they make a purchase.
ELECTRONIC recommends the customer use all products and equipment strictly under the user manual or instructions provided, and the customer ensures all personal protective equipment clothing, and dust extractors, are fitted properly.
All brochures, catalogs, descriptions, photos, and other promotional materials are to be treated as illustrative only and are not intended to amount to advice or recommendations on which a customer can or should rely.
In no event will TECHTRONIC be liable for any loss or damage as a result of a customer using a TECHTRONIC product for which dust is a byproduct or using a TECHTRONIC dust extractor that is selected by the customer.
Imported by:
Techtronic Industries Australia Pty Ltd
31 Gilby Road, Mount Waverley, VIC 3149
Melbourne, Australia
Techtronic Industries N.Z. Limited
Unit C, 70 Business Parade South,
Highbrook, Auckland 2013, New Zealand
RYOBI is a trade mark of Ryobi Limited and is used under license.

Documents / Resources

| RYOBI R36LTR10 Petrol String Trimmer [pdf] User Manual
R36LTR10 Petrol String Trimmer, R36LTR10, Petrol String Trimmer, String Trimmer, Trimmer
---|---