SEEKLANE STANDARD 7.0 Wireless Locator User Manual
- September 27, 2024
- SEEKLANE
Table of Contents
SEEKLANE STANDARD 7.0 Wireless Locator
Product Specifications
- Model: Standard 7.0
- Manufacturer: GUANGZHOU MESH INFORMATION TECHNOLOGY CO.,LTD
- Power Source: Two ER14250 batteries
- Broadcast Distance: Up to 80 meters
- Bluetooth Chip: Low power Bluetooth
- Features: Broadcasts UUID, Major, Minor, RSSI, battery power, name, MAC address
Product Overview
The Standard 7.0 Wireless Locator is a device powered by two ER14250
batteries and can operate for up to 5 years. It broadcasts various information
including UUID, Major, Minor, RSSI, battery power, name, and MAC address. The
device’s broadcast distance can reach up to 80 meters. It is easily installed
and fixed using 3M glue.
Hardware Parameters
- Model: Standard 7.0
- Antenna: PCB antenna
- Battery: ER14250 lithium batteries 3.6V 54*26mm
- Working Temperature: -40°C to 85°C
- Storage Temperature: -40°C to 85°C
- Working Humidity: 10% to 90% Non-condensing
- Storage Humidity: 5% to 90% Non-condensing
Order Types
- Standard 7.0
- Standard 7.0P
- Standard 7.0C
Contact Information
- Manufacturer: GUANGZHOU MESH INFORMATION TECHNOLOGY CO.,LTD
- Address: Room 2206, Science Building, Nansha Information Technology Park, NO.2 Huanshi South Avenue, Nansha Distict, Guangzhou, Guangdong, China
- Tel: 0086-020-36665463
- Mailbox: seeklane@seeklane.com
- Website: https://www.seeklane.com/
Version History
| Version Number | Date |
|---|---|
| V1.0 | 07-Sep-2023 |
Frequently Asked Questions (FAQ)
-
Q: Can the Standard 7.0 be used outdoors?
A: Yes, the Standard 7.0 can be used outdoors as it has a working temperature range of -40°C to 85°C. -
Q: How far can the Standard 7.0 broadcast its signal?
A: The Standard 7.0 can reach a broadcast distance of up to 80 meters. -
Q: Can the temperature and humidity sensors be added to the Standard 7.0?
A: By default, the Standard 7.0 does not come with temperature and humidity sensors. If needed, please contact the manufacturer for customization options.
Standard 7.0
User Manual
Document information
- Title Standard 7.0
- Subtitle Wireless Locator
- Document type Data sheet
- Revision and date V1.0
- 07-Sep -2023
SEEKLANE or third parties may hold intellectual property rights in the
products, names, logos and designs included in this document. Copying,
reproduction, modification or disclosure to third parties of this document or
any part thereof is only permitted with the express written permission of
SEEKLANE
The information contained herein is provided “as is” and SEEKLANE assumes no
liability for its use. No warranty, either express or implied, is given,
including but not limited to, with respect to the accuracy, correctness,
reliability and fitness for a particular purpose of the information. This
document may be revised by SEEKLANE at any time without notice. For the most
recent documents, visit
www.seeklane.com.
Copyright © GUANGZHOU MESH INFORMATION TECHNOLOGY CO.,LTD.
Product Overview
- Standard 7.0 is a Wireless Locator based on low power Bluetooth chip launched by GUANGZHOU MESH INFORMATION TECHNOLOGY CO.,LTD., which is powered by two ER14250 batteries and can be used for up to 5 years.
- Standard 7.0 can broadcast UUID, Major, Minor, RSSI, battery power, name, MAC address and other information, where UUID, Major, Minor, name can be set through the mobile phone APP.
- Standard 7.0 broadcast distance can reach 80 meters, using 3M glue can be easily installed and fixed.
- Standard 7.0 firmware is non-connect type. Non-connect type can only connect and change parameters within 30 seconds of Bluetooth beacon power on.
- Standard 7.0 default model without temperature and humidity sensor and acceleration sensor, if necessary, please contact our sales.
Product Photos
Hardware parameters
Hardware parameters
Model| Standard 7.0
Antenna| PCB antenna
Battery| ER14250 of lithium batteries 21200 mAh
---|---
Voltage| 3.6 V
Dimensions (D×H)| ᴓ5426mm
Wireless performance
Wireless Standards| Bluetooth ®4.2
Frequency range| 2400MHz—2483.5MHz
Data rate| 1Mbps
Modulation mode| GFSK Modulation
Encryption| AES HW Encryption
Transmission power| Tx Power -20to +4 dBm in 4dB Steps
Receiving sensitivity| 93 dBm at 1Mbps BLE
Work model| Peripheral
Other
Environment| Working temperature :-40℃~85℃
Storage temperature :-40℃~85℃
Working humidity :10~90 Non-condensing per cent
Storage humidity :5~90 Non-condensing
Order Type
- Standard 7.0
- Standard 7.0P
- Standard 7.0C
Contact us
GUANGZHOU MESH INFORMATION TECHNOLOGY CO.,LTD
Address : Room 2206 ,Science Building,Nansha Information Technology Park,
NO.2 Huanshi South Avenue,Nansha Distict,Guangzhou,Guangdong,China
Tel :0086-020-36665463
Mailbox: seeklane@seeklane.com
Website: https://www.seeklane.com/
Version History
Version Number| Date| Change of personnel| Change
content
---|---|---|---
V1.0| 07-Sep-2023| syfeng| Initial release
| | |
| | |
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>