LENSO HY300 Mini Projector 4K Magcubic Instruction Manual

LENSO HY300 Mini Projector 4K Magcubic

Thanks for your purchase. For any inquiries, contact us at hello@lenso.co or on our website www.lenso.co

Imported by OUI SMART 15 RUE DES HALLES 75001 PARIS, FRANCE
www.lenso.co
www.lenso.fr

Attention
Please read this manual carefully before use and keep it for future reference.

1. The projector is non-dustproof or non-waterproof.
2. In order to reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
3. Please use the original power adapter. The projector should work under a specified rated power supply.
4. When the projector is working, please do not look directly into the lens, the strong light will flash your eyes and cause slight pain. Children should use the projector under the supervision of adults.
5. Do not cover the vents of the projector. Heating will reduce the life of the projector and cause danger.
6. Regularly clean projector vents or dust may cause cooling malfunction.
7. Do not use the projector in a greasy, damp, dusty, or smoky environment. Oil or chemicals will cause malfunction.
8. Please handle with care during daily use.
9. Please cut off the power of the projector is out of use for a long time.
10. Non-professionals are forbidden to disassemble the projector for testing and maintenance.

Introduction

The Lenso Neptune, part of Lenso’s brand-new LCD range, offers ceiling and wall projection capabilities, providing exceptional versatility.

For clarity and optimum results, operating the projector in a dark environment is recommended.

You can slide the focus wheel left and right until you get a clear image .

Basic Parameters

• Material: PVC and aluminum
• Colour: Space Gray
• Size: 13.411.921.Bcm
• Weight: 0.65 kg

Projection Parameters

• LCD
• Android 11 / Android smart
• LED (50,000 hours)
• Brightness: 120 ANSI
• Resolution: 1280*720P
• Projection air: 1 m – 3.3 m
• Vent
• Contrast ratio: 1500:1
• Projection distance: 1.2 to 4 m
• Focus: Manual
• Multi language
• Video format: HEVC, H.265, MPEG-2, MPEG-4, H.264, VP8, VP9
• Audio format: MPEGl, Layer3, AC3, EAC3, AAC, HEAAC, WMA, LPCM, IMA-ADPCM, MS-ADPCM
• Picture format: JPG, PNG, BMP, etc.
• Keystone Correction: Yes
• Voltage: 110V – 220V
• Speaker: 3W

System

• Screen mirror: Airpin/Airplay/MiraCast
• Operating system: Android 11.0 / Android Smart
• RAM: 1 GB
• ROM flash: 8 GB
• WiFi: 2.4G/5G
• Bluetooth: BT 4.2

Package

• 1 x Projector Lenso Neptune (1)
• 1 x Unit IR remote control (4)
• 1 x Unit supply DC adaptor (3)
• 1 x Unit HDMI cable (5)
• 1 x User manual (2)

1. Net weight: 640 gr
2. 2-years warranty
3. Certificate FCC / CE / RoHS

Structure Description

The picture and function description of the projector is for reference only. It is subject to change without prior notice.

Prepare The Remote Control

1. Open the battery compartment.
2. Insert the supplied batteries (type AAA) with correct polarity(+/-) indicated.
3. Close the battery compartment.

Notice : when using the remote control, point the remote control at the IR sensor located on the back of the projector, and make sure there is no obstacle between the remote control and the IR sensor.
CAUTION!
The improper use of batteries can lead to overheating, explosion, risk of fire and injury. Leaking batteries can possibly damage the remote control/

• Never expose the remote control to direct sunlight.
• Avoid deforming, dismantling, or charging the batteries.
• Avoid exposure to open fire and water.
• Replace empty batteries immediately.
• Remove the batteries from the remote control if not in use for long periods of time.

To use on-screen pointer Remote Control

1. When the remote control is paired with the projector, press on the remote control to display or cancel the on-screen pointer.
2. When the pointer (angled arrow) is displayed on the projection screen, move the remote control in the air then the pointer moves across the screen correspondingly.
3. Press the button on the remote control to confirm the selection ( button OK).

Plug the power adapter

Connect the power adapter to DC port on the projector, and then to the wall outlet.

Home Menu

Projector Settings
Setting – Projector setting, enter to setup projection mode, keystone correction and Screen Zoom.

WiFi Setting

1. Settings – Network Setting – WIFI Setting, WIFI “ON”;
2. Scroll the WIFI list to select WIFI ID and input password to connect internet.

Bluetooth Setting

Settings – Bluetooth setting, Bluetooth “ON”, click “Refresh Device” and search for device pairing until it is connected.

Bluetooth Speaker Mode

1. Settings – Bluetooth Speaker – Select “Speaker Mode: Open”.
2. Turn ON the smartphone and search “Bluetooth Name” Bluetooth device, select “Bluetooth Name” and start pairing, waiting for the instruction as below: Do you want to pair with Bluetooth Name? Press “OK” to finish the pairing.
3. Press the remote control “back” or “home” button to quit “Bluetooth Speaker Mode”.

Language Setting

Setting – Language Setting, enter to setup “Language” and “Input Selector”.

Other Setting

Setting – Other settings, Application setting, Factory Reset, and Developer mode are available.

HDMI IN

Connect a playback device (e.g. a Blu-ray player, gaming console, camcorder, digital camera or PC) to the projector through HDMI connection. With this connection, images are shown on the projection screen, and audio is played on the projector.

1. Using an HDMI cable, connect the HDMI connector on the projector to the HDMI output on the playback device.
2. To select HDMI input, select SIGNAL on the home Menu, and select HDMI.
   If the projection screen does not show images, select HDMI input manually. Access the settings options and go to Input Source – HDMI.

Miracast

• Ensure that Android devices(phone,pad, ect )are in the same local wireless LAN with these devices Operations on Devices:
  • Home Screen My Apps Miracast Open miracast service
  • Turn on the phone mirroring Connection

Operations Android phone devices

Airplay

• Ensure that Apple devices(iphone, pad, ect )are in the same local wireless LAN with these devices Operations on Devices:
• Home Screen My Apps > Airpin (Pro)> Select AirPlay
• Turn on the phone mirroring
• Connection
• Operations iphone devices

Initial operation

Placement
You can install the projector in the following configurations. Follow the guidelines below for different projector placement.

Front table

1. Place the projector on a table in front of the projection screen. This is the most common way to position the projector for quick setup and portability.
2. To adjust projection to the correct position, select on the upper right of the home screen, and press OK, then go to Projector Settings – Image – Ceiling – Front.

Front Mode: In this mode, the projector is oriented forward, projecting the image directly onto a screen or surface in front of it. Ceiling Mode: In this mode, the projector is mounted on the ceiling and projects the image downward, usually onto a wall-mounted projection screen. Rear Mode: This mode is similar to the front mode, but the projector is positioned behind the screen, allowing for projection from the rear of the projection surface. Table Mode: In this mode, the projector is placed on a table or flat surface and projects the image upward or at a slight angle, such as for use with a rear-projection screen.

Integrated tripod
The integrated tripod of Neptune allows for a 180° rotation, enabling projection on both walls and ceilings.

Connect power supply
The projector can be operated by either external power or built-in battery.

Caution
Always use the button (!yo turn the projector on and off.

Operation by external power
Using the external power adapter, connect the port DC on the projector to the supplied power adapter. Then connect the power adapter to the wall outlet.

Power on

• Press (!.) to turn ON the projector. The LED on the projector turns from red to blue.
• To turn off the projector, press (!.) and then press it again when the power-off confirmation message pops up.
• The LED on the projector turns from blue to red.
• The distance between the projector and the screen determines the actual size of the image.

Image setup

Screen size adjustment
The projection screen size (or size of images) is determined by the distance between the lens of the projector and the projection surface.

• The projection distance needs to be 1.2 times the width of your desired screen size.
• The projection image size is to up to 80″.
• The projection distance is 80 cm to 200 cm.

Image sharpness adjustment
To adjust image focus, turn the focus adjustment knob on the side of the projector.

Bluetooth streaming

Through Bluetooth, you can wirelessly stream audio from the projector to a Bluetooth speaker. Before you use the projector with a Bluetooth speaker for the first time, pair it with the Bluetooth speaker.

Note:

• The effective operation range between the projector and the Bluetooth device is approximately 10 meters (30 feet).
• The music streaming may be interrupted by any obstacles between the Bluetooth device and the projector.
• Bluetooth streaming is not available when using HDMI or USB-C video input.
• For better Bluetooth performance, use a 5 GHz Wi-Fi network.

1. Turn on your Bluetooth speaker.
2. On the projector, access the Bluetooth settings.
3. Select on the upper right of the home screen, and press OK, then go to Projector Settings -Bluetooth On. Then enable Bluetooth by selecting Switch Bluetooth if not enabled.
4. In the Bluetooth settings interface of the projector, select your Bluetooth speaker name from the Bluetooth device list.
5. The projector is connected to your Bluetooth speaker. Audio from the projector streams to your Bluetooth speaker.

Bluetooth re-connection
The projector is re-connected to the last connected speaker automatically when the connected speaker is turned on.

Connection to a second Bluetooth speaker
You need to disable Bluetooth on the currently connected speaker, and then pair a second Bluetooth speaker with the projector.

Connect to playback devices
Note: Make sure all devices are disconnected from the power outlet before establishing or changing any connections.

Connect to devices through HDMI
Connect a playback device (e.g. a Blu-ray player, gaming console, camcorder, digital camera or PC) to the projector through HDMI connection. With this connection, images are shown on the projection screen, and audio is played on the projector.

1. Using an HDMI cable, connect the HDMI connector on the projector to the HDMI output on the playback device.
2. The projector automatically switches to HDMI input when HDMI connection is made. The projection screen shows images.
   If the projection screen does not show images, select HDMI input manually. Press to access the settings options and go to Input Source – HDMI.

Other features

Listen through external speakers or headphones

• Connect external speakers or headphones to the projector. With this connection, audio from the projector is played through the external speakers or headphones.

Danger of hearing damage!

• Before connecting the headphones, turn down the volume on the projector.
• Do not use the projector over a longer time at high volume – especially when using headphones. This could lead to hearing damage.
• Using a 3.5 mm audio cable, connect the connector on the projector to the analogue audio input (3.5 mm jack, or red and white jacks) on the external speakers. Or connect the connector on the projector to headphones.
• The speakers of the projector are deactivated automatically when the external speakers or headphones are connected to the projector.
• When connecting to the headphones, use the volume control on the remote control to adjust the volume to a comfortable level.

Browse storage devices

Through the projector, you can access and play the pictures, audio and video files stored on the local storage and connected storage devices (e.g. a USB flash drive, HOD, camcorder or digital camera).

1. Connect a USB storage device to the USB port on the projector.
2. Select the File Manager icon on the home screen to access the files stored. Or select on the upper right of the home screen, and press OK, then go to File Manager.
3. Select your connected device or local storage when prompted for device selection.
4. The file browser is displayed. Use the navigation buttons and OK on the remote control to select and open files.

Copy files to the internal storage
The projector has 8GB of internal storage. You may copy files from an external storage to the internal storage.

1. Select a file or folder from the file browser, and press on the remote control to display the editing options, then select Copy to copy the file.
2. Press to go back to the storage selection interface, and select Internal to access the internal storage. Navigate to a folder, and press on the remote control to display the editing options, then select Paste to paste the file.
3. To cut or delete a file, select the file then press on the remote control to access the editing options.

Play video from storage devices

1. Select a video file from the content browser, and press OK. Then select a video player from the app list to play video. We recommend “MX Player Pro” app to play video.
2. To control playback, use OK or / on the remote control to pause/resume play or fast forward/backward (if applicable); or use the playback control bar displayed (if applicable).
3. During playback, press on the remote control to access more play options and settings (e.g. play mode, screen format and audio track, etc.), then use OK and the navigation buttons on the remote control to make a selection.

Play photo from storage devices

1. Select a photo file from the file browser, and press OK. Then select a photo player from the app list to display the photo.
2. When a photo is displayed, use the navigation buttons on the remote control to rotate or select a photo (if applicable).
3. During play, press on the remote control to access more play options (if applicable), such as zoom in/out and music play, then use OK and the navigation buttons on the remote control to make a selection.

Play music from storage devices

1. Select a music file from the content browser, and press OK. Then select a music player from the app list to play music.
2. To control playback, use the playback control bar displayed (if applicable).
3. During play, press on the remote control to access more play options (e.g. play mode), then use OK and the navigation buttons on the remote control to make a selection.

Download Application

1. Select Google Play Store on Home Menu
2. Enter your account email and password
3. The app will open and you can search and browse for content to download.

You can either download from play store or sideload with the USB Port.

After downloading , you can find your app on Applications Menu

Cleaning

Instructions for cleaning!
Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the projector. Do not spray the projector with any cleaning fluids.
Wipe over the surfaces gently. Be careful that you do not scratch the surfaces.

Cleaning the lens

Use a soft brush or lens cleaning paper for cleaning the lens of the projector.

DANGER!
Do not use any liquid cleaning agents!
Do not use any liquid cleaning agents for cleaning the lens, to avoid damaging the coating film on the lens.

Troubleshooting

Safety instructions

• Please pay attention to important information related to the operation and maintenance of the projector. You should read this information carefully to avoid problems. Following safety instructions will increase the life of the projector.
• Please consult the qualified personnel for installation and repair services, and do not use damaged wires, accessories, and other peripherals.
• The projector should be kept away from flammable, explosive, strong electromagnetic interference (large radar stations, power stations, substations), etc. Strong ambient light (avoid direct sunlight), etc.
• Do not cover projector vents.
• Please use the original power adapter.
• Keep adequate ventilation and make sure vents are not covered to avoid projector overheating.
• When the projector is working, please do not look directly into the lens, the strong light flashes your eyes and causes slight pain.
• Do not bend or drag the power cord.
• Do not put a power cord under the projector or any heavy objects.
• Do not cover other soft materials on the power cord.
• Do not heat the power cord.
• Avoid touching the power adaptor with wet hands.

LENSO branded items purchased from lenso.co include a 2-year limited replacement warranty. For Customer Service, please contact us via email hello@lenso.co
The Lenso® name and logo are registered trademarks.
LENSO. All Rights Reserved.
lmporte par/ Imported by OUI SMART
15 RUE DES HALLES
75001 PARIS, FRANCE
www.lenso.co
www.lenso.fr
Model HY300

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>