Newnex FireNEX-UDC Active USB-C to USB C Adapter User Guide
- September 26, 2024
- Newnex
Table of Contents
Newnex FireNEX-UDC Active USB-C to USB C Adapter
CONNECTION
- Connect the Newnex special USB-C cable to device side of FireNEX-UDC.
- If not using Newnex special USB-C cable, the USB-C connection will not support flip plug-in.
- Connect a standard USB-C cable to the host side of FireNEX-UDC.
- Connect the rest of USB connectors of the cables to host PC and USB devices.
- Mount the bracket to the panel you intend to mount the FireNEX-UDC, the bracket is at Host side by default. You may switch it to the device side with a hex screwdriver.
- You can also remove the bracket if you don’t need any mounting, keep the bracket stored in case you need it in the future.
FireNEX-UDC User Guide Rev 1.1
Specifications
- Product Name : FireNEX-UDC
- Connector Type: USB-C
- Compatibility: Host PC and USB devices
- Bracket : Mountable, reversible
- Version : Rev 1.1
FAQ
Q: Can I use any USB-C cable with FireNEX-UDC?
A: It is recommended to use the Newnex special USB-C cable for full
compatibility and support for flip plug-in.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>