Newnex FireNEX 80G Switching PCIe Bracket User Guide
- July 9, 2024
- Newnex
Table of Contents
Newnex FireNEX 80G Switching PCIe Bracket
Specifications
- Model: FireNEXTM-80G
- Compatibility: PCIe adapters
- Tools Needed : 1x Crosshead Screwdriver
Product Usage Instructions
Switching PCIe Bracket
- Remove all transceivers from the cage. Note: Lower the metal tab to pull out the transceiver.
- Unscrew the two mounting screws.
- Carefully remove the PCIe bracket.
- Insert the desired length PCIe bracket you are trying to switch. Ensure the two screw holes on the bracket are in line with the holes on the board.
- Tighten the two mounting screws. To complete the mounting process, install the PCIe adapter into the computer chassis for use.
Tools Needed
1x Crosshead Screwdriver
Directions
- Remove all transceivers from the cage.
- Unscrew the two mounting screws.
- Carefully remove the PCIe bracket.
- Insert the desired length PCIe bracket you are trying to switch. Ensure the two screw holes on the bracket are in line with the holes on the board.
- Tighten the two mounting screws. To complete the mounting process, install the PCIe adapter into the computer chassis for use.
FAQ
- Q: What tools are needed to switch the PCIe bracket?
- A: You will need 1x Crosshead Screwdriver to switch the PCIe bracket.
- Q: How should I align the new PCIe bracket during installation?
- A: Ensure that the two screw holes on the new bracket align with the holes on the board before tightening the mounting screws.
- Q: What is the recommended final step after switching the PCIe bracket?
- A: After switching the PCIe bracket, install the PCIe adapter into the computer chassis for use to complete the process.
Read User Manual Online (PDF format)
Loading......