Newnex 80G Expandable USB Extension System User Guide
- June 1, 2024
- Newnex
Table of Contents
Newnex 80G Expandable USB Extension System
Introduction
Thank you for purchasing FireNEXTM-80G, an innovative USB extension system for
USB 3.2/2.0/1.1 devices and Newnex’s latest addition to its line of optical
repeaters. This manual contains specifications of the package contents, a
step-by-step installation guide, as well as our return policy, warranty, and
where to find technical support.
Please read through this manual carefully before using the product. We highly
recommend you to keep this handy.
Package Contents
| PN | In The Box | Configuration |
|---|---|---|
| FX80G-x1 | 1x Quick Start Guide 1x Local Unit |
1x Standard PCle Bracket
1x Low Profile PCle Bracket| 1x Remote Unit
1x 5V DC Power Supply
FX80G-x2| 1x Quick Start Guide 1x Local Unit
1x Standard PCle Bracket
1x Low Profile PCle Bracket| 2x Remote Unit
2x 5V DC Power Supply
FX80G-x3| 1x Quick Start Guide 1x Local Unit
1x Standard PCle Bracket
1x Low Profile PCle Bracket| 3x Remote Unit
3x 5V DC Power Supply
FX80G-x4| 1x Quick Start Guide 1x Local Unit
1x Standard PCle Bracket
1x Low Profile PCle Bracket| 4x Remote Unit
4x 5V DC Power Supply
Installation Guide
WARNING
a. This product is sensitive to electrostatic discharges. Use an electrostatic
wrist strap and/or conductive mat when executing the steps below.
b. Do not install or remove the Local PCIe card while the host PC is on.
Always completely shut down the PC before switching the unit to other PCIe
slots.
-
Prepare the Host Computer
a. Make sure the PCIe clock frequency is not overclocked and set it to the default or 100Mhz in the BIOS
b. Disable PCIe Link State Power Management in Windows → advanced power settings -
Install the PCIe Local Unit
a. Power off the host PC and open up the computer chassis
b. Locate a PCIe slot on the motherboard that fits a PCIe x8 card
c. Install the appropriate height PCIe bracket included that fits your chassis
d. Gently push the Local Unit into the desired PCIe slot and secure the card with chassis screws -
Install the Remote Unit(s)
a. Place the Local Unit near the USB devices to be extended
b. Connect the DC power adapter
c. Connect the desired length OS2 single mode duplex LC fiber cable from the Host Unit to the Remote Unit
d. Repeat steps from 3a to 3c if installing multiple Remote Units -
Turn on system for the first time
a. Power on the computer and verify the following LEDs on both the Local and Remote Units
b. All drivers should be automatically installed with Windows and Linux OS
c. Repeat steps from 1a to 5a if switching the PCIe slot or fiber cable
Local Unit
Connect up to 8 USB 10Gbps Device(s)
- Connect USB Devices to the Remote Unit(s)
a. Install driver/software required for the USB devices
b. The connected USB devices can be hot plug and play
Features
- Extends USB 3.2/2.0/1.1 up to 700 meters over single-mode fiber cables
- Up to 4 Remote Units in simultaneous operation, each Remote Unit supporting 20Gbps total bandwidth
- Up to 2 USB 3.2 Gen 2 10Gbps Devices on each Remote Unit in simultaneous operation, allowing for a total of 8 connected devices
- USB 2.0/1.1 backwards compatible, universal support for low speed USB devices such as keyboard and mouse
- PCI-e standard and low profile brackets included to adapt for both regular and server PC chassis
- Metal enclosure for better protection from EMI and hazards from industrial environment
- Surface mounting holes ready for a secured installation
- USB3 Vision compliant screw locking ports for reliable cable interconnections
- Windows and Linux OS supported
| Data Rate | Extension Range |
|---|---|
| USB 10Gbps | 300 meters |
| USB 5Gbps | 700 meters |
Technical Support
Please visit our product page for additional information:
www.newnex.com/usb-3-2-gen2-80g-
extender.php
For more support, submit a RMA or support inquiry at: www.newnex.com/tech-
support
Return & Warranty
FireNEXTM-80G comes with a one-year limited manufacturer warranty from the
initial invoice date.
Visit www.newnex.com/return-policy for
more information and the return policy.
Customer Support
Contact Us:
Tel : 1(408) 986-9988
Fax : 1(408) 986-8034
Newnex Technology Corp.
3041 Olcott St.
Santa Clara, CA 95054, USA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>