BLUESOUND CP300 Wallmount Controller User Guide
- September 26, 2024
- BLUESOUND
Table of Contents
CP300 Wallmount Controller
Specifications
- Product: CP300 Wallmount Controller
- Power Supply: Power over Ethernet (POE) IEEE 802.3at Type 2
(30W)
Product Usage Instructions
Installation
- Connect LAN 1 to the network.
- Connect LAN 2 to the network.
- Connect LAN 3 to the network.
- Connect the PoE Data/Power supply for power over Ethernet (POE)
IEEE 802.3at Type 2 (30W).
Operation
The CP300 wallmount controller will automatically power up when
connected to PoE. To start using the device, select the BluOS
App.
Download BluOS Controller App
The BluOS Controller App for Android devices can be downloaded
from the Google App store.
User Manual: CP300-QS-EN-08 – JUL 2024
FAQ
Q: How do I reset the CP300 Wallmount Controller?
A: To reset the CP300, press and hold the reset button for 10
seconds.
Q: Can I use a non-PoE power supply with the CP300?
A: No, the CP300 requires a Power over Ethernet (PoE) IEEE
802.3at Type 2 (30W) power supply for operation.
WHAT’S IN THE BOX
CP300 Wallmount Controller
Quick Setup Guide
!
bluesoundprofessional.com/product/CP300-wall-mount-controller support.bluesoundprofessional.com
bluesound.com/downloads
INSTALL
LAN 1
LAN 2
LAN 3
PoE Data/Power supply Power over Ethernet (POE) IEEE 802.3at Type 2 (30W)
OPERATION
CP300 automatically powers up with PoE connection. Select BluOS App to start
operation.
DOWNLOAD
BluOS CONTROLLER APP
The BluOS Controller App for Android devices is available for download from
the Google App store.
©2024 BLUESOUND PROFESSIONAL, A DIVISION OF LENBROOK INDUSTRIES LIMITED All
rights reserved. Bluesound and Bluesound logo are trademarks of Bluesound
Professional, a division of Lenbrook Industries Limited. No part of this
publication may be reproduced, stored or transmitted in any form without the
written permission of Bluesound Professional.
CP300-QS-EN-08 – JUL 2024
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>