XGIMI Horizon S Max Home Projector User Guide

XGIMI Horizon S Max Home Projector

Product Information

Specifications

• Model: XM13Q
• Power: DC IN
• Ports: HDMI / eARC, USB 2.0 (x2)
• USB Output: DC 5V 500mA

Product Usage Instructions

• Getting Started
  To power on the device, connect it to a power source and press the power button located at the back of the device. To turn off the device, press the power button again.

• Remote Control Pairing
  To pair the remote control, place it within 10 cm of the device. Press and hold the specified buttons simultaneously until the indicator light starts flashing. Release the buttons when pairing mode is initiated. A successful connection is indicated by a sound. Repeat the process after 30 seconds if pairing fails.

• Remote Control Functions
  The remote control allows for focus adjustment with a short press enabling autofocus and a long press enabling manual focus.

• Uninterrupted Auto Keystone Correction
  When enabled, this feature automatically adjusts the display to a square image when the device is moved or relocated slightly. The correction process does not disrupt the projected content and works well on white, flat walls.

FAQ

• Q: What type of cable should be used for the HDMI 2.1 port?
  A: An HDMI 2.1 cable should be used for the HDMI 2.1 port to ensure optimal performance.

• Q: How can I enable autofocus on the device?
  A: Simply press the focus adjustment button on the remote control to enable autofocus.

Overview

Rear View

• A. Power
• B. HDMI/eARC
• C. USB 2.0
• D. USB 2.0
• E. DC IN

Note:

• An HDMI 2.1 cable should be used on the HDMI 2.1 port.
• USB output: DC 5V 500mA

Remote Control

• A. Power
• B. Settings
• C.  Google Assistant
• D. D-pad
• E. Back
• F. Home
• G. VOL –
• H. VOL +
• I. Menu
• J. Focus

Please read the user guide carefully before using this product.

• Thank you for buying and using XGIMI products. You should read this user guide carefully before using the product for both your safety and interest.
• XGIMI assumes no responsibility for any personal injury, damage to property or other loss caused due to failure to operate this product according to the instructions or precautions in this user guide.

About this user guide

• The copyright of this user guide belongs to XGIMI.
• The trademarks and names mentioned in this user guide belong to their respective owners. The content in the user guide may differ from the product.

Google, Android TV, and Google Cast are trademarks of Google LLC. Google Assistant is not available in certain languages and countries. Availability of services varies by country and language.

• Manufactured under license from IMAX Corporation. IMAX® is a registered trademark of IMAX Corporation in the United States and/or other countries. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol together are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
• HDMI High-Definition Multimedia interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
• For DTS patents, see http://patents.dts.com. Manufactured under license DTS Licensing Limited (for all other companies). DTS, DTS-HD Master Audio, DTS-HD, Virtual:X, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries.© 2021 DTS, Inc. ALL RIGHTS RESERVED.
• Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 1992–2022 Dolby Laboratories. All rights reserved.

Disposal instructions for used products:

• The product is designed and manufactured with high-quality materials and components that are recyclable.
• Where you see either symbol on any of our electrical products, batteries, or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in the UK and EU countries, Turkey, or other countries with separate waste collection systems available. To ensure correct waste treatment, please dispose of them via an authorized collection facility, per any applicable laws or requirements. Waste electrical products and batteries may also be disposed of free of charge via retailers when buying a new product of the same type. Furthermore, within the UK and EU countries, larger retailers may accept small waste electronic products free of charge. Please ask your local retailer if this service is available for the products you wish to dispose of. In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste. This symbol may be used on batteries in combination with additional chemical symbols. The chemical symbol for lead (Pb) will appear if the battery contains more than 0.004% lead.

Model: XM13Q * XGIMI Technology reserves the right to interpret and amend this user guide.

Getting Started

Power On/Off

• Connect to a power source, and press the power button on the back to turn on the device.
• When the device is on, press the power button on the back to turn off the device.

Remote Control Pairing

• Place the remote control within 10 cm of the device.
• Press and simultaneously, and an indicator light will begin flashing as the remote control enters pairing mode. Release the buttons as soon as the flashing begins. The connection is successful when you hear a “ding”.
• If pairing fails, repeat the above steps after 30 s.

Remote Control Functions

Focus adjustment function:

• Short press to enable autofocus.
• Long press to enable manual focus.

Uninterrupted Auto Keystone Correction
When Uninterrupted Auto Keystone Correction is enabled, the display will be adjusted automatically to a square image whenever you move the device slightly or to another location. In addition, Uninterrupted Auto Keystone Correction will not interfere with the projected content during the process, and the device will continue to work well on white, flat walls.

Google Assistant
Press the Google Assistant button on your remote control and use your voice to search for movies and shows, get answers to inquiries, receive recommendations to match your mood, control your smart home devices, and more.

Settings
Adjust device and image settings on any interface by pressing on the remote control. Specific functions for various settings are as follows:

source
Sound Settings| Adjust the device’s voice output channel
3D Video Setup| 3D settings for video and signal sources
Sleep Timer| Automatically shut down the device after a pre-set time
All Settings| Settings for other related functions

• 3D mode and Image mode settings can only be adjusted via the video play or signal source channel.
• Frame ratio and HDMI version settings can only be adjusted via the HDMI channel.

Google Cast

• Easily cast your favorite movies, music, and more to your TV with Google Cast.
• Simply tap the Cast button on apps you already know and love to stream entertainment from your phone, tablet or laptop to the TV. While you’re streaming, you can keep using your phone for other things like scrolling through social media, sending texts, and even accepting calls.

System Upgrade

Online upgrade
The online upgrade can be made through the system setting.

WARNING:
Please refer to the information on the exterior bottom of the enclosure for electrical and safety information before installing or operating the device.

Please refer to the actual system functions, as they are continuously updated.

CAUTION
Warning for remote control

• There is a risk of explosion if the battery is replaced with the wrong type of battery
• Disposal of the battery into fire, or mechanically crushing or cutting the battery may result in an explosion.
• Do not leave the battery in an environment with extremely high temperatures, as doing so may result in an explosion or the leakage of flammable liquid or gas.
• Do not put the battery in an environment with extremely low pressure, as doing so may result in an explosion or the leakage of flammable liquid or gas.

Wi-Fi (5 GHz band) Warning
High-gain directional antennas apply only to fixed peer-to-peer networking. Do not place the device near radar systems.

• Frequency band: 5150 – 5250 MHz:

• Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure, or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 – 5250 MHz band.

• Frequency band: 5250 – 5350 MHz:
  Indoor use: Inside buildings only. Installations and use in road vehicles, trains, and aircraft are not permitted. Outdoor use is not permitted.

• Frequency band: 5470 – 5725 MHz:
  Installations and use in road vehicles, trains, and aircraft and use for unmanned aircraft systems (UAS) are not permitted.

Correct Use of the Device

• Do not point the lens into the eyes as injury to the eyes can be caused by the strong projector light.
• Do not block the air inlet/outlet of the device to avoid damage to internal electronic devices arising from normal heat dissipation failure of the device.
• Do not wipe the lens directly with cleaning tools like paper or cloth to avoid damaging the lens; please only blow off the dust on the lens surface with an air blower.
• Do not wash the device with chemicals, detergents, or any liquid to prevent corroding the circuit board. Rainwater, moisture, and mineral-containing liquids may also damage the circuit board.
• Keep the device and its components and accessories out of the reach of children.
• Ensure that the device is used in a dry and ventilated environment.
• Do not store the device in extremely hot or cold places since extreme temperatures will shorten the lifespan of electronic devices. A safe storage and usage temperature is 0°C to 40°C.
• Do not put the device into any heating equipment (such as a dryer or microwave oven) for drying.
• Do not use excessive force on the device or place barriers behind it to prevent damaging it.
• Do not throw, strike, or sharply shake the device to prevent damaging the internal circuit board.
• Do not try to disassemble and assemble the device yourself. Please contact XGIMI after-sales service for any issues.
• Do not repair any product on your own. In the case a product or component does not work, consult XGIMI after-sales service promptly or return it to the factory for repair.
• Operations in the 5.15-5.35 GHz band are restricted to indoor usage only.
• When installing and operating the device, the distance between a heat radiator and the device should be at least 20 cm.
• As with any bright source, do not stare directly into the beam. The device complies with RG2 IEC 62471-5:2015 as well as 21 CFR 1040.10 and 1040.11 except for conformance as a Risk Group 2 LIP as defined in IEC 62471-5:Ed. 1.0.
• For more information see Laser Notice No. 57, dated May 8, 2019.
• Be cautious when using earphones with the device as there may be excessive sound pressure from earphones and headphones that can cause hearing loss.
• When rotating the device, make sure that there are no obstacles around it to prevent collisions. Also, please do not put your hand in gaps to avoid pinching.

Projector Laser

• Max Power: 0.39 W
• Emitted wavelength: 643 nm, 465 nm, 525 nm

VCSEL Laser

• Max Power: 0.39 W
• Emitted wavelength: 940 nm
• Name and publication date of the standard: IEC 60825-1:2014

FCC STATEMENT

The device meets provisions of part 15 of the FCC rule. Operation meets the following 2 conditions: (1) the device will not cause harmful interference, and (2) the device must accept any interference received, including interference that may result in accidental operations. Users that intentionally or unintentionally modifier and replacement of radiators without explicit approval from the responsible compliance party may prevent the user from operating the device. If the manual is provided in a form other than paper, such as provided in a computer disk through the Internet, then the information required in the section can be included in the manual in the alternative form under the premise that users can have access to the form information.

For B-class digital or peripheral devices, instructions provided by users shall include the following or similar statements and put them in a prominent place of manual text:

Notes:
The device has been tested to meet restrictions of part 15 of the FCC rule on B-class digital devices. These restrictions are aimed at proving the effective prevention of harmful interference in a residential installation. If installation and use are not made according to the instructions, the device will generate and radiate radio frequency energy and may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If the device does cause harmful interference to radio or television reception (determined by stopping and starting the device), it is suggested that users should attempt to correct the interference by one or more of the following measures:

• Reposition direction of receiving antenna.
• Increase the distance between the device and the receiver.
• Connect the device to a circuit socket different from the circuit connected to the receiver.
• Consult distributors or experienced radio/television technicians to seek help.

FCC ID: 2AR82-SKIWB663U11

Declaration of Conformity

1. XGIMI Technology Co., Ltd hereby declares that this product complies with the essential requirements and other relevant provisions of Directive 2014/53/EU, Radio Equipment Regulations 2017, Directive 2011/65/EU.
2. This product is allowed to be used in some EU member states as illustrated in the right chart.
3. This Frequency applies to the following Member States or the geographical area within a Member State where restrictions on putting into service or requirements for authorization of use exist.
4. You can find the Declaration of Conformity at https://global.xgimi.com/pages/product-support.

ISED Warning
This device complies with the Innovation, Science, and Economic Development License-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC: 24728-SKIWB663U11

Radiation Exposure Statement

• The device is compiled by using FCC and ISED Innovation, Science, and Economic Development radiation exposure limits specified for uncontrolled environments.
• The transmitter shall not be placed or operated in conjunction with any other antenna or transmitter.
• For the laser projector, the device meets FCC and ISED Innovation, Science, and Economic Development radiation exposure limits in specified uncontrolled environments.
  • Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter etc).
  • Beware that this product may emit harmful light radiation.

Wireless Specification

• Bluetooth version: 5.1
• Bluetooth transmitter frequency range: 2402 MHz – 2480 MHz
• Bluetooth transmitter power: ≤10 dBm (EIRP)
• Wi-Fi network: IEEE 802.11 a/b/g/n/ac (2.4GHz/5GHz)
• 2.4G Wi-Fi transmitter frequency range: 2412 – 2472 MHz (2.4 GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
• 2.4G Wi-Fi transmitter power: ≤20 dBm (EIRP)
• 5G Wi-Fi transmitter frequency range: 5.15 – 5.35GHz, 5.470 – 5.725GHz, 5.725 – 5.850GHz
• 5G Wi-Fi transmitter power: 5.15 – 5.25GHz < 23dBm (EIRP), 5.25 – 5.35GHz & 5.470 – 5.725GHz < 23dBm (EIRP), 5.725 – 5.850GHz < 14dBm (EIRP)

Note: This power is for the EU only

Parameter

• Power Supply: 19V 15.79A

For more information, please find the electronic manual: xgimi.com/us/support/index.

References

• Patents - DTS
• Support Center | XGIMI Customer Care
• Product Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>