KBOD PWR-09 5000mAh 10W Suction Cup Wireless Power Bank User Manual
- September 27, 2024
- KBOD
Table of Contents
PWR-09 5000mAh 10W Suction Cup Wireless Power Bank
“`html
Specifications:
- Capacity: 5000mAh
- Input:
- Micro input: 5V 2A (Max)
- Type C input: 5V 2A (Max)
- Output:
- USB-A output: 5V 2.1A (Max)
Product Usage Instructions:
-
Charging the Power Bank: Connect the power
bank to a power source using the provided cables. -
Charging Electronic Devices with the Power
Bank: Connect your electronic device to the power bank
using a compatible charging cable. -
Charging Electronic Devices with Wireless
Charging: Place your wireless charging-enabled device on
the wireless charging surface. Note that if the wireless charging
symbol flashes, remove any foreign objects between the charging pad
and the device. -
Magnetic Iron Ring: Attach the magnetic iron
ring to your device or its case for magnetic alignment with the
power bank.
FAQ:
Q: What should I do if the wireless charging symbol flashes on
the screen?
A: If the symbol flashes, it indicates that there is a foreign
object between the charging pad and your device. Remove the object
for charging to begin.
Q: Can I disassemble the power bank for repairs?
A: No, do not disassemble the device. Seek professional
assistance for any repairs to avoid risks of injury or damage.
Q: How do I know if the power bank is fully charged?
A: The LED screen will indicate when the power bank is fully
charged. It is recommended to unplug it from the power source once
fully charged.
“`
5000mAh 10W Suction Cup Wireless Power Bank Instruction Manual FCC ID:2BEF7-PWR-09
45 3
1 2
67
Features: 1. Power bank ON/OFF Button 2. Colorful LED screen 3. USB-A output
4. Type C input 5. Micro input 6. Wireless charging surface 7. Magnetic
surface
What’s included: 1x 5000mAh Wireless Power Bank 1x USB-A to Type C charging
cable 1x Instruction Manual 1x Magnetic Iron Ring
5000mAh/3.7V/18.5Wh Micro input5V 2A(Max) Type C input:5V 2A(Max) USB-
Aoutput:5V 2.1A(Max)
LED Screen: · Press the Powerbank ON/OFF button(1) once
to light up the dulled display to view voltage and remaining power capacity.
· Hold down the button for 3 seconds to turn OFF.
INSTRUCTIONS: 1. Charging the PowerBank:
· Charge the powerbank fully before usage. · Connect the provided charging
cable to a
power source and to the Type-C Input (4) on the powerbank. · Once connected
and charging, the LED screen will show input power and voltage. · Once fully
charged, the power capacity will show 100% power capacity.
2. Charging Electronic Devices with the Power Bank
· Connect the appropriate cable to your mobile phone/device.
· Connect the Type-C tip or USB-A tip of a cable to Type-C Output(4) or USB-A
Output(3), the LED screen will show output power and voltage when charging.
· Remove the charging cable from your mobile device when fully charged.
3. Charging Electronic Devices with the Wireless Charging:
· Press Powerbank ON/OFF button(1) the LED screen will show the remaining
power capacity, and the wireless charging symbol will flash once the power
bank is in wireless charging standby mode.
· Place wireless charging enable device on Wireless Charging Pad(5). The
device will begin to charge, the wireless charging symbol will show on the LED
screen when charging.
· Remove your mobile device and powerbank once fully charged.
** Note: If the wireless charging symbol flashes on the screen, an unknown
object is being detected between the wireless charging pad and the phone by
FOD(Foreign
Object Detection). The powerbank will not begin to charge until object is
removed.
4. Magnetic Iron Ring The magnetic iron ring can be sticked to your device or
its case for a magnetic power bank alignment and attachment.
SAFETY PRECAUTIONS: · WARNING-When using this product, basic
precautions should always be followed: 1. Read all the instructions before
use. 2. Never store or use this product in
temperatures below 32°F (0°C) or above 115°F (45°C). 3. Do not overcharge your
phone. The unit may become hot under excessive use. Remove your phone once it
is fully charged. Never charge your phone for more than 7 hours at a time. 4.
The unit will only achieve full performance after 2 or 3 completed charge and
discharge cycles. 5. To reduce the risk of injury, close supervision is
required when the product is used near children. 6. Do not expose the device
to moisture. 7. Do not use the device in excess of its output rating. Overload
outputs above the
8. Do not use the device if damaged or
- explosion or risk of injury. 10. Do not disassemble the device. For
professional. Incorrect reassembly may -
or temperatures above 104°F (40°C) may result in explosion.
12. To ensure product safety, ensure that
identical replacement parts. 13. Attachments on the back of your phone
can impede the effectiveness of the wireless charger, and lead to overheating. Please remove attachments from the phone before charging on this device. 14. The strong magnetic fields of neodymium magnets can damage items such as television, computer monitors, credit cards, bank cards, computers, diskettes and other data carriers, video tapes, mechanical watches, hearing aids, loud speakers and VCRs. Pace-makers may be damaged or switch to “Test Mode” in the presence of a strong magnetic force, if a pace-maker or other electrical body implant is in use, keep a minimum of 3 feet distance.
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
- Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
9NN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>