TRAXXAS TRA95096-4 Electric Brushless Monster Truck

Product Information

Specifications

• Category: RC Car Parts
• Model Number: Various
• Material: Various materials including aluminum, vinyl, and plastic
• Color Options: Black, Blue, Green, Orange, Red

Product Usage Instructions

Bearings & Bushings
Ensure proper installation of bearings and bushings for smooth operation and reduced friction.

• 9594: Description of the part and its use.
• 9594X: Description of the part and its use.

Body & Accessories
Instructions for assembling body components and accessories.

• 1926: Antenna caps, vinyl (2)/ antenna spool
• 1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

Bumpers & Skidplates
Proper installation of front and rear bumpers along with skidplates.

• 9535: Bumper, front/ skidplate, front/ tie bar mount, front/ 3×25 CS (2)
• 9536: Bumper, rear/ skidplate, rear/ tie bar mount, rear/ 3×25 CS (2)

Frequently Asked Questions (FAQ)

1. Q: How do I properly install the body reinforcement set?
   A: The body reinforcement set should be securely attached following the provided instructions. Ensure proper alignment and fit before finalizing the installation.

2. Q: What is the material used for the carriers, stub axle?
   A: The carriers are made of 6061-T6 aluminum with various anodized color options such as blue, green, orange, and red.

Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically.

Bearings & Bushings

• 9594 Ball bearing kit, Sledge® (complete)
• 9594X Ball bearing kit, stainless steel, Sledge® (complete)
• 4889X Ball bearings, black rubber sealed (10x19x5mm) (2)
• 5114A Ball bearings, black rubber sealed (5x8x2.5mm) (2)
• 5105A Ball bearings, black rubber sealed (6x10x3mm) (2)
• 5180A Ball bearings, black rubber sealed (6x13x5mm) (2)
• 5118A Ball bearings, black rubber sealed (8x16x5mm) (2)

Body & Accessories

• 1926 Antenna caps, vinyl (2)/ antenna spool
• 1726 Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
• 9510 Body reinforcement set, black/ skid pads (roof) (fits #9511 body)
• 9510X Body reinforcement set, blue/ skid pads (roof) (fits #9511 body)
• 9510G Body reinforcement set, green/ skid pads (roof) (fits #9511 body)
• 9510T Body reinforcement set, orange/ skid pads (roof) (fits #9511 body)
• 9510R Body reinforcement set, red/ skid pads (roof) (fits #9511 body)
• 9513X Body support (assembled with front mount & rear latch)/ skid pads (roof) (left & right)
• 9513 Body support, center/ 3×12 CS (8) (fits Sledge®)
• 9511 Body, Sledge® (clear, requires painting)/window, grille, lights decal sheet
• 9511A Body, Sledge®, blue (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)
• 9511-BLUE Body, Sledge®, blue (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)
• 9511G Body, Sledge®, green (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)
• 9511-GRN Body, Sledge®, green (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)
• 9511T Body, Sledge®, orange (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)
• 9511-ORNG Body, Sledge®, orange (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)
• 9511X Body, Sledge®, ProGraphix® (graphics are printed, requires paint & final color application)/ window, grille, lights decal sheet
• 9511-PRO Body, Sledge®, ProGraphix® (graphics are printed, requires paint & final color application)/ window, grille, lights decal sheet
• 9511R Body, Sledge®, red (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)
• 9511-RED Body, Sledge®, red (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)
• 2514 Decal sheet, racing sponsors
• 9950 Official Team Traxxas® racing decal set(flag logo/ 6-color)

Bumpers & Skidplates

• 9535 Bumper, front/ skidplate, front/ tie bar mount, front/ 3×25 CS (2)
• 9536 Bumper, rear/ skidplate, rear/ tie bar mount, rear/ 3×25 CS (2)

Chassis & Attachments

• 9514 Body mount, front
• 9515 Body mount, rear/ shock guard (body retainer), front
• 9624 Box, receiver (sealed) w/ ESC mount/ receiver box cover/ access plug/ foam pads/ silicone grease/ 2.5×10 CS (2)/ 3×10 BCS (4)
• 9523 Center brace (T-Bar), 6061-T6 aluminum (black-anodized)/ 3×16 SS (2)
• 9523G Center brace (T-Bar), 6061-T6 aluminum (green-anodized)/ 3×16 SS (2)
• 9523T Center brace (T-Bar), 6061-T6 aluminum (orange-anodized)/ 3×16 SS (2)
• 9523X Chassis brace (T-Bar), 6061-T6 aluminum (blue-anodized)/ 3×16 SS (2)
• 9523A Chassis brace (T-Bar), 6061-T6 aluminum (dark titanium-anodized)/ 3×16 SS (2) (fits Sledge®)
• 9523R Chassis brace (T-Bar), 6061-T6 aluminum (red-anodized)/ 3×16 SS (2)
• 9520 Chassis brace, front/ 4×15 CCS (2)
• 9521 Chassis braces (rear (1), rear tower (2))/ 4×15 CCS (4)
• 9522 Chassis, Sledge®, aluminum (blue-anodized)
• 9522A Chassis, Sledge®, aluminum (dark titanium-anodized)
• 9522G Chassis, Sledge®, aluminum (green-anodized)
• 9522R Chassis, Sledge®, aluminum (red-anodized)
• 9627 Hold down, battery
• 9516 Latch, body mount, rear
• 9628 Retainer, battery hold-down (front and rear) (1 each)
• 9625 Seal kit, receiver box (includes o-ring, seals, and silicone grease)
• 9539 Shock tower, front, 6061-T6 aluminum (blue-anodized)
• 9539A Shock tower, front, 6061-T6 aluminum (gray-anodized)
• 9539G Shock tower, front, 6061-T6 aluminum (green-anodized)
• 9539T Shock tower, front, 6061-T6 aluminum (orange-anodized)
• 9539R Shock tower, front, 6061-T6 aluminum (red-anodized)
• 9639 Shock tower, front, 7075-T6 aluminum (blue-anodized) (fits Sledge®)
• 9639A  Shock tower, front, 7075-T6 aluminum (dark titanium-anodized) (fits Sledge®)
• 9639G Shock tower, front, 7075-T6 aluminum (green-anodized) (fits Sledge®)
• 9639T Shock tower, front, 7075-T6 aluminum (orange-anodized) (fits Sledge®)
• 9639R Shock tower, front, 7075-T6 aluminum (red-anodized) (fits Sledge®)
• 9538 Shock tower, rear, 6061-T6 aluminum (blue-anodized)
• 9538A Shock tower, rear, 6061-T6 aluminum (gray-anodized)
• 9538G Shock tower, rear, 6061-T6 aluminum (green-anodized)
• 9538T Shock tower, rear, 6061-T6 aluminum (orange-anodized)
• 9538R Shock tower, rear, 6061-T6 aluminum (red-anodized)
• 9638 Shock tower, rear, 7075-T6 aluminum (blue-anodized) (fits Sledge®)
• 9638A Shock tower, rear, 7075-T6 aluminum (dark titanium-anodized) (fits Sledge®)
• 9638G Shock tower, rear, 7075-T6 aluminum (green-anodized) (fits Sledge®)
• 9638T Shock tower, rear, 7075-T6 aluminum (orange-anodized) (fits Sledge®)
• 9638R Shock tower, rear, 7075-T6 aluminum (red-anodized) (fits Sledge®)
• 9524 Side guards, chassis (left and right)/ 3×8 CCS (10)
• 9623 Skidplate, chassis, black (fits Sledge®)
• 9623X Skidplate, chassis, blue (fits Sledge®)
• 9623A Skidplate, chassis, graphite gray (fits Sledge®)
• 9623P Skidplate, chassis, gray (fits Sledge®)
• 9623G Skidplate, chassis, green (fits Sledge®)
• 9623T Skidplate, chassis, orange (fits Sledge®)
• 9623R Skidplate, chassis, red (fits Sledge®)
• 9527 Tie bars, front, 6061-T6 aluminum (blue-anodized)
• 9527A Tie bars, front, 6061-T6 aluminum (dark titanium-anodized)
• 9527G Tie bars, front, 6061-T6 aluminum (green-anodized)
• 9527T Tie bars, front, 6061-T6 aluminum (orange-anodized)
• 9527R Tie bars, front, 6061-T6 aluminum (red-anodized)
• 9629 Tie bars, front, 7075-T6 aluminum (blue-anodized) (fits Sledge®)
• 9629A Tie bars, front, 7075-T6 aluminum (dark titanium-anodized) (fits Sledge®)
• 9629G Tie bars, front, 7075-T6 aluminum (green-anodized) (fits Sledge®)
• 9629T Tie bars, front, 7075-T6 aluminum (orange-anodized) (fits Sledge®)
• 9629R Tie bars, front, 7075-T6 aluminum (red-anodized) (fits Sledge®)
• 9528 Tie bars, rear, 6061-T6 aluminum (blue-anodized)
• 9528A Tie bars, rear, 6061-T6 aluminum (dark titanium-anodized)
• 9528G Tie bars, rear, 6061-T6 aluminum (green-anodized)
• 9528T Tie bars, rear, 6061-T6 aluminum (orange-anodized)
• 9528R Tie bars, rear, 6061-T6 aluminum (red-anodized)
• 9630 Tie bars, rear, 7075-T6 aluminum (blue-anodized) (fits Sledge®)
• 9630A Tie bars, rear, 7075-T6 aluminum (dark titanium-anodized) (fits Sledge®)
• 9630G Tie bars, rear, 7075-T6 aluminum (green-anodized) (fits Sledge®)
• 9630T Tie bars, rear, 7075-T6 aluminum (orange-anodized) (fits Sledge®)
• 9630R Tie bars, rear, 7075-T6 aluminum (red-anodized) (fits Sledge®)
• 7799 Tires, rubber (2) (fits Traxxas® #7775X wheelie bar wheels)
• 9626 Tray, battery
• 9576 Wheelie bar, black (assembled)/ 3×20 CS (8)
• 9576X Wheelie bar, blue (assembled)/ 3×20 CS (8)
• 9576G Wheelie bar, green (assembled)/ 3×20 CS (8)
• 9576T Wheelie bar, orange (assembled)/ 3×20 CS (8)
• 9576R Wheelie bar, red (assembled)/ 3×20 CS (8)
• 7775X Wheels, wheelie bar, 6061-T6 aluminum (blue-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4)

Sledge®: TQi Traxxas Link Enabled 2.4GHz Radio & TSM (Model 95096-4) Parts List

• 7775A Wheels, wheelie bar, 6061-T6 aluminum (dark titanium-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4)
• 7775G Wheels, wheelie bar, 6061-T6 aluminum (green-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4)
• 7775T Wheels, wheelie bar, 6061-T6 aluminum (orange-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4)
• 7775R Wheels, wheelie bar, 6061-T6 aluminum (red-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4)
• 9518 Wing mount
• 9512 Wing washer (1)
• 9617 Wing washer, 6061-T6 aluminum (blue-anodized) (1)/ 4x12mm FCS (2)
• 9617A Wing washer, 6061-T6 aluminum (dark-titanium anodized) (1)/ 4x12mm FCS (2)
• 9617G Wing washer, 6061-T6 aluminum (green-anodized) (1)/ 4x12mm FCS (2)
• 9617T Wing washer, 6061-T6 aluminum (orange-anodized) (1)/ 4x12mm FCS (2)
• 9617R Wing washer, 6061-T6 aluminum (red-anodized) (1)/ 4x12mm FCS (2)
• 9517X Wing/ wing washer (blue)/ 4x12mm FCS (2)
• 9517G Wing/ wing washer (green)/ 4x12mm FCS (2)
• 9517T Wing/ wing washer (orange)/ 4x12mm FCS (2)
• 9517R Wing/ wing washer (red)/ 4x12mm FCS (2)
• 9517A Wing/ wing washer (white)/ 4x12mm FCS (2)
• 9517 Wing/ wing washer/ 4x12mm FCS (2)

Differential Components

• 4889X Ball bearings, black rubber sealed (10x19x5mm) (2)
• 9581X Carrier, differential (aluminum, blue-anodized)/ differential bushing/ ring gear gasket/ 3x10mm CCS (4)
• 9581A Carrier, differential (aluminum, dark titanium-anodized)/ differential bushing/ ring gear gasket/ 3x10mm CCS (4)
• 9581G Carrier, differential (aluminum, green-anodized)/ differential bushing/ ring gear gasket/ 3x10mm CCS (4)
• 9581T Carrier, differential (aluminum, orange-anodized)/ differential bushing/ ring gear gasket/ 3x10mm CCS (4)
• 9581R Carrier, differential (aluminum, red-anodized)/ differential bushing/ ring gear gasket/ 3x10mm CCS (4)
• 9581 Carrier, differential/ differential bushing (metal)/ o-rings (2)/ ring gear gasket
• 9585 Differential assembly, center, complete (fits Sledge®)
• 9580 Differential assembly, front or rear, complete (fits Sledge®)
• 8680 Differential gasket/ x-rings (2)/ 12.2x18x0.5 metal washer (1)/ 12.2x18x0.5 PTFE-coated washer (1)
• 5136X Differential oil kit (1 each: 10K, 30K, 50K weights)
• 9583 Differential output cup, front or rear (hardened steel)/ 2.5x12mm pin
• 9586 Differential output cup, center (hardened steel)/ 2.5x12mm pin
• 9586X Differential output cup, center (hardened steel, heavy duty) (2)/ 2.5x12mm pin (2)
• 9583X Differential output cup, front or rear (hardened steel, heavy duty) (2)/ 2.5x12mm pin (2)
• 9587X Drive cup, center, front or rear (steel constant-velocity) (1) (fits Sledge®)
• 9587 Drive cup, front or rear (hardened steel) (for differential pinion gear)/ driveshaft boots (2)/ boot retainers (2)
• 9582 Gear set, differential (output gears (2)/ spider gears (4)/ spider gear shafts (2)/ spacers (4))
• 9584 Mount, center differential
• 9584X Mount, center differential carrier, 6061-T6 aluminum (blue-anodized)
• 9584A Mount, center differential carrier, 6061-T6 aluminum (dark titanium-anodized)
• 9584G Mount, center differential carrier, 6061-T6 aluminum (green-anodized)
• 9584T Mount, center differential carrier, 6061-T6 aluminum (orange-anodized)
• 9584R Mount, center differential carrier, 6061-T6 aluminum (red-anodized)
• 5130 Oil, differential (100K wt) (0.7 oz (20cc))
• 5135 Oil, differential (10K wt) (1.7 oz (50cc))
• 5040 Oil, differential (20M wt) (standard)
• 5136 Oil, differential (30K wt) (1.7 oz (50cc))
• 5137 Oil, differential (50K wt) (1.7 oz (50cc))
• 9579 Ring gear, differential/ pinion gear, differential
• 9579R Ring gear, differential/ pinion gear, differential (machined) (front or rear)

Driveline Components

• 9559 Boots, driveshaft (2)/ retainer (assembled) (2)
• 9552 Carriers, stub axle (left and right)
• 9552X Carriers, stub axle, 6061-T6 aluminum (blue-anodized) (left and right)/ 3x18mm CS (with threadlock) (2)
• 9552A Carriers, stub axle, 6061-T6 aluminum (dark titanium-anodized) (left and right)/ 3x18mm CS (with threadlock) (2)
• 9552G Carriers, stub axle, 6061-T6 aluminum (green-anodized) (left and right)/ 3x18mm CS (with threadlock) (2)
• 9552T Carriers, stub axle, 6061-T6 aluminum (orange-anodized) (left and right)/ 3x18mm CS (with threadlock) (2)
• 9552R Carriers, stub axle, 6061-T6 aluminum (red-anodized) (left and right)/ 3x18mm CS (with threadlock) (2)
• 9555 Driveshaft, center, front (shaft only, 4mm x 88mm) (1)
• 9555X Driveshaft, center, front (steel constant-velocity) (shaft only) (1) (for use only with #9655X steel CV driveshafts)
• 9556 Driveshaft, center, rear (shaft only, 4mm x 146.5mm) (1)
• 9556X Driveshaft, center, rear (steel constant-velocity) (shaft only) (1) (for use only with #9655X steel CV driveshafts)
• 9558 Driveshaft, front, steel constant-velocity (shaft only, 5mm x 133.5mm) (1)
• 9557 Driveshaft, rear (shaft only, 5mm x 131mm) (1) (for use with #9554 or 9554X stub axles)
• 9654X Driveshaft, rear, steel constant-velocity (complete assembly) (2)
• 9557X Driveshaft, rear, steel constant-velocity (shaft only) (1) (for use only with #9654X rear steel CV driveshafts)
• 9550 Driveshaft, steel constant-velocity (assembled), front (1)
• 9655X Driveshafts, center, assembled (steel constant-velocity), front (1)/ rear (1) (fits Sledge®)
• 9632 Kingpin bushings, machined steel (4)
• 9680 O-rings (6)
• 9551 Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for #9550 front or #9654X rear steel CV driveshafts)
• 9656X Rebuild kit, steel constant-velocity driveshafts, center (front or rear) (includes pins for 2 driveshaft assemblies) (for #9655X steel CV driveshafts)
• 9553 Stub axle, front
• 9554 Stub axle, rear (for use only with #9557 rear driveshaft)
• 9553X Stub axles, hardened steel (2) (for steel constant-velocity driveshafts) (fits Sledge®)
• 9554X Stub axles, hardened steel (2) (for use only with #9557 driveshaft) (fits Sledge®)
• 8654 Wheel hubs, splined, 17mm (blue-anodized) (4)/ 4×5 GS (4), 3x14mm pin (4)
• 8654G Wheel hubs, splined, 17mm (green-anodized) (4)/ 4×5 GS (4), 3x14mm pin (4)
• 8654-GRAY Wheel hubs, splined, 17mm (gray-anodized) (4)/ 4×5 GS (4), 3x14mm pin (4)
• 8654A Wheel hubs, splined, 17mm (orange-anodized) (4)/ 4x5mm GS (4)/ 3x14mm pin (4)
• 8654R Wheel hubs, splined, 17mm (red-anodized) (4)/ 4×5 GS (4), 3x14mm pin (4)
• 7758A Wheel nuts, splined, 17mm, serrated (black-anodized) (4)
• 7758 Wheel nuts, splined, 17mm, serrated (blue-anodized) (4)
• 7758G Wheel nuts, splined, 17mm, serrated (green-anodized) (4)
• 7758T Wheel nuts, splined, 17mm, serrated (orange-anodized) (4)
• 7758R Wheel nuts, splined, 17mm, serrated (red-anodized) (4)

Front Suspension

• 9547 Camber links, front (117mm) (2) (assembled with hollow balls)

• 9547X Camber links, front, Sledge® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9547A Camber links, front, Sledge® (TUBES dark titanium-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9547G Camber links, front, Sledge® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9547T Camber links, front, Sledge® (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9547R
  Camber links, front, Sledge® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9532
  Caster blocks (c-hub), left & right/ kingpin bushings (4)

• 9532X
  Caster blocks (c-hubs), 6061-T6 aluminum (blue-anodized), left & right/ kingpin bushings (4)/ 3x20mm CS (with threadlock) (4)

• 9532A
  Caster blocks (c-hubs), 6061-T6 aluminum (dark titanium-anodized), left & right/ kingpin bushings (4)/ 3x20mm CS (with threadlock) (4)

• 9532G
  Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right/ kingpin bushings (4)/ 3x20mm CS (with threadlock) (4)

• 9532T
  Caster blocks (c-hubs), 6061-T6 aluminum (orange-anodized), left & right/ kingpin bushings (4)/ 3x20mm CS (with threadlock) (4)

• 9532R
  Caster blocks (c-hubs), 6061-T6 aluminum (red-anodized), left & right/ kingpin bushings (4)/ 3x20mm CS (with threadlock) (4)

• 9683
  Hollow balls, steel (8)

• 9632
  Kingpin bushings, machined steel (4)

• 9598
  Linkage, sway bar (front or rear)

• 9597
  Mounts, sway bar/ collars (front and rear)

• 9647
  Rod ends, standard (4) (assembled with hollow balls) (fits #9547/9548 series aluminum camber links & #9549 series aluminum toe links)

• 9539
  Shock tower, front, 6061-T6 aluminum (blue-anodized)

• 9539A
  Shock tower, front, 6061-T6 aluminum (gray-anodized)

• 9539G
  Shock tower, front, 6061-T6 aluminum (green-anodized)

• 9539T
  Shock tower, front, 6061-T6 aluminum (orange-anodized)

• 9539R
  Shock tower, front, 6061-T6 aluminum (red-anodized)

• 9639
  Shock tower, front, 7075-T6 aluminum (blue-anodized) (fits Sledge®)

• 9639A
  Shock tower, front, 7075-T6 aluminum (dark titanium-anodized) (fits Sledge®)

• 9639G
  Shock tower, front, 7075-T6 aluminum (green-anodized) (fits Sledge®)

• 9639T
  Shock tower, front, 7075-T6 aluminum (orange-anodized) (fits Sledge®)

• 9639R
  Shock tower, front, 7075-T6 aluminum (red-anodized) (fits Sledge®)

• 9636X
  Steering block arms (aluminum, blue-anodized) (2) (fits #9635 series & 9637 series steering blocks)

• 9636A
  Steering block arms (aluminum, dark titanium-anodized) (2) (fits #9635 series & 9637 series steering blocks)

• 9636G
  Steering block arms (aluminum, green-anodized) (2) (fits #9635 series & 9637 series steering blocks

• 9636T
  Steering block arms (aluminum, orange-anodized) (2) (fits #9635 series & 9637 series steering blocks)

• 9636R
  Steering block arms (aluminum, red-anodized) (2) (fits #9635 series & 9637 series steering blocks)

• 9635X
  Steering blocks, 6061-T6 aluminum (blue-anodized), left & right/ steering block arms (2)/ 4x16mm BCS (with threadlock) (4)/ 3x18mm CS (2)/ 3x10mm BCS (with threadlock) (4)/ M3x0.5mm NL (2)

• 9635A
  Steering blocks, 6061-T6 aluminum (dark titanium-anodized), left & right/ steering block arms (2)/ 4x16mm BCS (with threadlock) (4)/ 3x18mm CS (2)/ 3x10mm BCS (with threadlock) (4)/ M3x0.5mm NL (2)

• 9635G
  Steering blocks, 6061-T6 aluminum (green-anodized), left & right/ steering block arms (2)/ 4x16mm BCS (with threadlock) (4)/ 3x18mm CS (2)/ 3x10mm BCS (with threadlock) (4)/ M3x0.5mm NL (2)

• 9635T
  Steering blocks, 6061-T6 aluminum (orange-anodized), left & right/ steering block arms (2)/ 4x16mm BCS (with threadlock) (4)/ 3x18mm CS (2)/ 3x10mm BCS (with threadlock) (4)/ M3x0.5mm NL (2)

• 9635R
  Steering blocks, 6061-T6 aluminum (red-anodized), left & right)/ steering block arms (2)/ 4x16mm BCS (with threadlock) (4)/ 3x18mm CS (2)/ 3x10mm BCS (with threadlock) (4)/ M3x0.5mm NL (2)

• 9537
  Steering blocks, left & right/ 4x16mm BCS (4)/ M4x0.7 NL (4)

• 9637X
  Steering blocks, left & right/ steering block arms (aluminum, blue-anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)

• 9637A
  Steering blocks, left & right/ steering block arms (aluminum, dark titanium- anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)

• 9637G
  Steering blocks, left & right/ steering block arms (aluminum, green-anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)

• 9637T
  Steering blocks, left & right/ steering block arms (aluminum, orange-anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)

• 9637R
  Steering blocks, left & right/ steering block arms (aluminum, red-anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)

• 9526
  Steering link (30mm) (1)/ hollow balls (2)

• 9633
  Suspension arm covers, black, front (left and right)/ 2.5×8 CCS (12)

• 9633X
  Suspension arm covers, blue, front (left and right)/ 2.5×8 CCS (12)

• 9633G
  Suspension arm covers, green, front (left and right)/ 2.5×8 CCS (12)

• 9633T
  Suspension arm covers, orange, front (left and right)/ 2.5×8 CCS (12)

• 9633R
  Suspension arm covers, red, front (left and right)/ 2.5×8 CCS (12)

• 9531
  Suspension arm, front (left), black

• 9531X
  Suspension arm, front (left), blue

• 9531G
  Suspension arm, front (left), green

• 9531T
  Suspension arm, front (left), orange

• 9531R
  Suspension arm, front (left), red

• 9530
  Suspension arm, front (right), black

• 9530X
  Suspension arm, front (right), blue

• 9530G
  Suspension arm, front (right), green

• 9530T
  Suspension arm, front (right), orange

• 9530R
  Suspension arm, front (right), red

• 9540
  Suspension pin set, front & rear (hardened steel), 4x67mm (4), 3.5×48.2mm (2), 3.5×56.7mm (2)/ M3x0.5mm NL, flanged (4)

• 9541
  Suspension pins, inner, front or rear, 4x67mm (hardened steel) (2)

• 9542
  Suspension pins, outer, front, 3.5×48.2mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2)

• 9595
  Sway bar kit, Sledge® (front and rear) (includes front and rear sway bars and linkage)

• 9596
  Sway bar set, Sledge® (includes 1 each of all 6 sway bars)

• 9527
  Tie bars, front, 6061-T6 aluminum (blue-anodized)

• 9527A
  Tie bars, front, 6061-T6 aluminum (dark titanium-anodized)

• 9527G
  Tie bars, front, 6061-T6 aluminum (green-anodized)

• 9527T
  Tie bars, front, 6061-T6 aluminum (orange-anodized)

• 9527R
  Tie bars, front, 6061-T6 aluminum (red-anodized)

• 9629
  Tie bars, front, 7075-T6 aluminum (blue-anodized) (fits Sledge®)

• 9629A
  Tie bars, front, 7075-T6 aluminum (dark titanium-anodized) (fits Sledge®)

• 9629G
  Tie bars, front, 7075-T6 aluminum (green-anodized) (fits Sledge®)

• 9629T
  Tie bars, front, 7075-T6 aluminum (orange-anodized) (fits Sledge®)

• 9629R
  Tie bars, front, 7075-T6 aluminum (red-anodized) (fits Sledge®)

Hardware

• 1552
  3x8mm Hex Cap Screws (6)/ Washers (6)/ Wrench (1)

• 4859
  CS 3×10 flathead (hex drive)

• 9592
  Hardware kit, Sledge® (contains all hardware used on Sledge®)

• 9592X
  Hardware kit, stainless steel, Sledge® (contains all hardware used on Sledge®)

• 9591
  Hardware, motor mount, Sledge®

• 2584
  Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3)

• 9564
  Mount, shock (steel) (2)

• 2745X
  Nuts, 3mm nylon locking, black (8)

• 2744X
  Nuts, 3mm nylon locking, flanged, black (8)

• 1748
  Nuts, 4mm nylon locking, black (10)

• 4858
  Screw, 3×25 countersunk machine (hex drive) (6)

• 3229
  Screws, 2.5x10mm cap-head machine (hex drive) (6)

• 2577
  Screws, 3x10mm button-head machine (hex drive) (6)

• 2579
  Screws, 3x15mm button-head machine (hex drive) (6)

• 2586
  Screws, 3x15mm cap-head machine (hex drive) (6)

• 2553
  Screws, 3x15mm countersunk machine (6) (hex drive)

• 2583X
  Screws, 3x18mm cap-head machine (hex drive) (6)

• 2585
  Screws, 3x20mm cap-head machine (hex drive) (6)

• 2581
  Screws, 3x25mm button-head machine (hex drive) (6)

• 2581X
  Screws, 3x25mm cap-head machine (hex drive) (6)

• 9682
  Screws, 3x45mm cap-head machine (hex drive) (6)

• 2550
  Screws, 3x8mm countersunk machine (6) (hex drive)

• 3937
  Screws, 4x12mm button-head machine (hex drive) (6)

• 2542
  Screws, 4x12mm countersunk machine (hex drive) (6)

• 2546
  Screws, 4x15mm countersunk machine (hex drive) (6)

• 3933
  Screws, 4x16mm button-head machine (hex drive) (6)

• 2589
  Screws, 4x20mm button-head machine (hex drive) (6)

• 2596
  Screws, 4x25mm button-head machine (hex drive) (6)

• 2595
  Screws, 4x35mm button-head machine (hex drive) (6)

• 3939
  Screws, 4x6mm button-head machine (hex drive) (with threadlock) (6)

• 1548
  Set (grub) screws, 3x4mm (8)/ 4x4mm (stainless) (4)

• 9588
  Shoulder screws, 3x16mm (2)

• 9540
  Suspension pin set, front & rear (hardened steel), 4x67mm (4), 3.5×48.2mm (2), 3.5×56.7mm (2)/ M3x0.5mm NL, flanged (4)

• 9541
  Suspension pins, inner, front or rear, 4x67mm (hardened steel) (2)

• 9542
  Suspension pins, outer, front, 3.5×48.2mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2)

• 9543
  Suspension pins, outer, rear, 3.5×56.7mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2)

LED Lights

• 9693
  Breakaway cable, LED lights (high-voltage)

• 9692
  Bumper, front (body) (with LED lights)/ bumper mount (fits #9511 body)

• 6590
  High-Voltage Power Amplifier

• 9690
  LED light set, complete (includes body bumper with LED lights, roof skid plate with LED lights, #6590 high-voltage power amplifier) (fits #9511 body)

• 9691
  Skid plate, roof (body) (with LED lights) (fits #9511 body)

Motors & Electronics

• 3476
  Cooling fan kit (with shroud)/ 2.5x16mm CS (with threadlock) (4) (fits #3483 motor)

• 3475
  Cooling fan, Velineon® VXL ESC (fits VXL-6s & VXL-8s)

• 9590
  Gear adapter, fixed (A)/ motor mount spacer

• 2277
  Gear set, metal (for 2275 servo)

• 9591
  Hardware, motor mount, Sledge®

• 9589
  Motor mount, aluminum (upper and lower)/ motor mount spacer/ hardware

• 3483
  Motor, 2000Kv 77mm, brushless (with 6.5mm gold-plated connectors & high- efficiency heatsink)

• 3483R
  Rebuild kit, 2000Kv motor, brushless (includes plastic endbell, 5x16x5mm ball bearings (2), 5.05×7.5x.05 washer (1), 5.05×7.5×0.1 washer (1), 5.05×7.5x.19 washer (1), 6x5x8.5 spacer (1))

• 2278
  Servo case, aluminum (black-anodized) (middle) (for 2275 servo)

• 2276
  Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2275 servo)

• 2255
  Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof

• 2275
  Servo, digital high-torque, metal gear (ball bearing), waterproof

• 3477
  Shroud, motor fan/ 2.5x16mm CS (with threadlock) (4) (fits #3483 motor)

• 3484
  Velineon® VXL-6s Brushless Power System, waterproof (includes VXL-6s ESC and 2000Kv, 77mm motor)

• 3485T
  Velineon® VXL-6s Electronic Speed Control, waterproof (brushless) (fwd/rev/brake)

• 3478
  Wire harness (for use with #3475 cooling fan)

Radio System, Batteries & Chargers

• 2872X
  5000mah 11.1v 3-Cell 25C LiPo Battery

• 2842X
  5000mah 7.4v 2-Cell 25C LiPo Battery

• 2843X
  5800mah 7.4v 2-Cell 25C LiPo Battery

• 2869X
  7600mah 7.4v 2-Cell 25C LiPo Battery

• 2914
  AA 4PK

• 1726
  Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

• 2943
  Battery charge indicators, green (4), grey (4), blue (4)

• 6548
  Battery door, TQ 2.4 transmitter (replacement for #6516, 6517 transmitter)

• 2991
  Battery/charger completer pack (includes #2972 Dual iD charger (1), #2869X 7600mAh 7.4V 2-cell 25C LiPo iD® Battery (2))

• 2990
  Battery/charger completer pack (includes #2972 Dual iD charger (1), #2872X 5000mAh 11.1V 3-cell 25C LiPo iD® Battery (2))

• 2998
  Battery/charger completer pack (includes #2981 iD charger (1), #2890X 6700mAh 14.8V 4-cell 25C LiPo battery (1))

• 2972
  Charger, EZ-Peak Dual, 100W, NiMH/LiPo with iD Auto Battery Identification

• 2973
  Charger, EZ-Peak Live Dual, 200W, NiMH/LiPo with iD Auto Battery Identification

• 2970
  Charger, EZ-Peak Plus, 4 amp, NiMH/LiPo with iD Auto Battery Identification

• 2981
  Charger, EZ-Peak® Plus 4s, 8 amp, NiMH/LiPo with iD® Auto Battery Identification

• 6525
  Communication link, telemetry expander

• 6565
  Data link, telemetry expander (connects #6550X telemetry expander 2.0 to the

  6590 high-voltage power amplifier)

• 6566
  Data link, telemetry expander (connects #6550X telemetry expander 2.0 to the Velineon® #3465 VXL-4s, #3485 Velineon® VXL-6s, or #3496 Velineon® VXL-8s electronic speed control)

• 2971
  EZ-Peak Live 12-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification and Bluetooth®

• 2277
  Gear set, metal (for 2275 servo)

• 2968X
  LiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas® iD® batteries)

• 2968
  LiPo cell voltage checker/balancer (requires #2938X adapter for Traxxas® iD® batteries)

• 6563
  Mount, telemetry expander (attaches to chassis brace (T-Bar))

• 6535
  Mount, temperature sensor (electric motors)/ wire tie/ thermal pad

• 6533
  Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel)

• 6552
  Seal kit, expander box (includes o-ring, seals, and silicone grease)

• 6526
  Sensor, auto-detectable, temperature

• 6527
  Sensor, auto-detectable, voltage

• 6521
  Sensor, temperature and voltage (long)

• 2278
  Servo case, aluminum (black-anodized) (middle) (for 2275 servo)

• 2276
  Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2275 servo)

• 2275
  Servo, digital high-torque, metal gear (ball bearing), waterproof

• 6553X
  Telemetry Expander 2.0 and GPS module 2.0, TQi radio system

• 6550X
  Telemetry expander 2.0, TQi radio system (for use only with #6551X GPS module)

• 6551X
  Telemetry GPS module 2.0, TQi radio system (for use only with #6550X telemetry expander)

• 6509R
  TQi 2.4 GHz High Output radio system, 2-channel, Traxxas® Link enabled, TSM® (2-ch transmitter, 5-ch micro receiver)

• 6507R
  TQi 2.4 GHz High Output radio system, 4-channel with Traxxas® Link Bluetooth® module, TSM® (4-ch transmitter, 5-ch micro receiver)

• 6528
  Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 2-channel (transmitter only)

• 6529
  Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 3-channel (transmitter only)

• 6530
  Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 4-channel (transmitter only)

• 6511
  Traxxas® Link Bluetooth® module

Ready-To-Race Model

• 95096-4
  Sledge®: 1/8 Scale 4WD Brushless Electric Monster Truck with TQi 2.4GHz Traxxas Link™ Enabled Radio System and Traxxas Stability Management (TSM)®

Rear Suspension

• 9529
  Bulkhead, front or rear

• 9548
  Camber links, rear (144mm) (2) (assembled with hollow balls)

• 9548X
  Camber links, rear, Sledge® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9548A
  Camber links, rear, Sledge® (TUBES dark titanium-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9548G
  Camber links, rear, Sledge® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9548T
  Camber links, rear, Sledge® (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9548R
  Camber links, rear, Sledge® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9683
  Hollow balls, steel (8)

• 9598
  Linkage, sway bar (front or rear)

• 9597
  Mounts, sway bar/ collars (front and rear)

• 9519X
  Mud guards, rear, blue (left and right)/ 3×15 CCS (2)/ 3×25 CCS (2)

• 9519
  Mud guards, rear, gray (left and right)/ 3×15 CCS (2)/ 3×25 CCS (2)

• 9519G
  Mud guards, rear, green (left and right)/ 3×15 CCS (2)/ 3×25 CCS (2)

• 9519T
  Mud guards, rear, orange (left and right)/ 3×15 CCS (2)/ 3×25 CCS (2)

• 9519R
  Mud guards, rear, red (left and right)/ 3×15 CCS (2)/ 3×25 CCS (2)

• 9647
  Rod ends, standard (4) (assembled with hollow balls) (fits #9547/9548 series aluminum camber links & #9549 series aluminum toe links)

• 9538
  Shock tower, rear, 6061-T6 aluminum (blue-anodized)

• 9538A
  Shock tower, rear, 6061-T6 aluminum (gray-anodized)

• 9538G
  Shock tower, rear, 6061-T6 aluminum (green-anodized)

• 9538T
  Shock tower, rear, 6061-T6 aluminum (orange-anodized)

• 9538R
  Shock tower, rear, 6061-T6 aluminum (red-anodized)

• 9638
  Shock tower, rear, 7075-T6 aluminum (blue-anodized) (fits Sledge®)

• 9638A
  Shock tower, rear, 7075-T6 aluminum (dark titanium-anodized) (fits Sledge®)

• 9638G
  Shock tower, rear, 7075-T6 aluminum (green-anodized) (fits Sledge®)

• 9638T
  Shock tower, rear, 7075-T6 aluminum (orange-anodized) (fits Sledge®)

• 9638R
  Shock tower, rear, 7075-T6 aluminum (red-anodized) (fits Sledge®)

• 9634
  Suspension arm covers, black, rear (left and right)/ 2.5×8 CCS (12)

• 9634X
  Suspension arm covers, blue, rear (left and right)/ 2.5×8 CCS (12)

• 9634G
  Suspension arm covers, green, rear (left and right)/ 2.5×8 CCS (12)

• 9634T
  Suspension arm covers, orange, rear (left and right)/ 2.5×8 CCS (12)

• 9634R
  Suspension arm covers, red, rear (left and right)/ 2.5×8 CCS (12)

• 9534
  Suspension arm, rear (left), black

• 9534X
  Suspension arm, rear (left), blue

• 9534G
  Suspension arm, rear (left), green

• 9534T
  Suspension arm, rear (left), orange

• 9534R
  Suspension arm, rear (left), red

• 9533
  Suspension arm, rear (right), black

• 9533X
  Suspension arm, rear (right), blue

• 9533G
  Suspension arm, rear (right), green

• 9533T
  Suspension arm, rear (right), orange

• 9533R
  Suspension arm, rear (right), red

• 9540
  Suspension pin set, front & rear (hardened steel), 4x67mm (4), 3.5×48.2mm (2), 3.5×56.7mm (2)/ M3x0.5mm NL, flanged (4)

• 9541
  Suspension pins, inner, front or rear, 4x67mm (hardened steel) (2)

• 9543
  Suspension pins, outer, rear, 3.5×56.7mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2)

• 9595
  Sway bar kit, Sledge® (front and rear) (includes front and rear sway bars and linkage)

• 9596
  Sway bar set, Sledge® (includes 1 each of all 6 sway bars)

• 9528
  Tie bars, rear, 6061-T6 aluminum (blue-anodized)

• 9528A
  Tie bars, rear, 6061-T6 aluminum (dark titanium-anodized)

• 9528G
  Tie bars, rear, 6061-T6 aluminum (green-anodized)

• 9528T
  Tie bars, rear, 6061-T6 aluminum (orange-anodized)

• 9528R
  Tie bars, rear, 6061-T6 aluminum (red-anodized)

• 9630
  Tie bars, rear, 7075-T6 aluminum (blue-anodized) (fits Sledge®)

• 9630A
  Tie bars, rear, 7075-T6 aluminum (dark titanium-anodized) (fits Sledge®)

• 9630G
  Tie bars, rear, 7075-T6 aluminum (green-anodized) (fits Sledge®)

• 9630T
  Tie bars, rear, 7075-T6 aluminum (orange-anodized) (fits Sledge®)

• 9630R
  Tie bars, rear, 7075-T6 aluminum (red-anodized) (fits Sledge®)

Shock Oil

• 5031
  Oil, shock (20 wt, 200 cSt, 60cc) (silicone)

• 5032
  Oil, shock (30 wt, 350 cSt, 60cc) (silicone)

• 5033
  Oil, shock (40 wt, 500 cSt, 60cc) (silicone)

• 5034
  Oil, shock (50 wt, 600 cSt, 60cc) (silicone)

• 5035
  Oil, shock (60 wt, 700 cSt, 60cc) (silicone)

• 5036
  Oil, shock (70 wt, 900 cSt, 60cc) (silicone)

• 5037
  Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)

• 5029
  Shock oil bottle (60cc) (for mixing shock oil)

• 5038X
  Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils with spinning carousel rack)

• 5038
  Spinning carousel rack

Shocks (GT-Maxx®)

• 8965X
  Body, GT-Maxx® shock (aluminum, blue-anodized) (1)

• 9665X
  Body, GT-Maxx® shock (aluminum, blue-anodized) (long) (1)

• 8965G
  Body, GT-Maxx® shock (aluminum, green-anodized) (1)

• 9665G
  Body, GT-Maxx® shock (aluminum, green-anodized) (long) (1)

• 8965T
  Body, GT-Maxx® shock (aluminum, orange-anodized) (1)

• 9665T
  Body, GT-Maxx® shock (aluminum, orange-anodized) (long) (1)

• 8965R
  Body, GT-Maxx® shock (aluminum, red-anodized) (1)

• 9665R
  Body, GT-Maxx® shock (aluminum, red-anodized) (long) (1)

• 8962
  Rebuild kit, GT-Maxx® shocks (lower cartridge, pistons, piston nuts, bladders, screws) (renews 2 shocks)

• 9664A
  Shock caps, aluminum (black-anodized), GT-Maxx® shocks (4)/ spacers (4) (for Sledge®)

• 9664X
  Shock caps, aluminum (blue-anodized), GT-Maxx® shocks (4)/ spacers (4) (for Sledge®)

• 9664G
  Shock caps, aluminum (green-anodized), GT-Maxx® shocks (4)/ spacers (4) (for Sledge®)

• 9664T
  Shock caps, aluminum (orange-anodized), GT-Maxx® shocks (4)/ spacers (4) (for Sledge®)

• 9664R
  Shock caps, aluminum (red-anodized), GT-Maxx® shocks (4)/ spacers (4) (for Sledge®)

• 9664
  Shock caps, GT-Maxx® shocks (2)/ spring perch/ adjusters (2) (for 2 shocks)

• 9663
  Shock pins, hardened steel (front (2), rear (2))/ 3x8mm BCS (4)

• 8963
  Shock shaft, 72mm (GT-Maxx®) (steel, chrome finish) (2)/ rod ends (2)/ hollow balls (2)

• 8963T
  Shock shaft, 72mm (GT-Maxx®) (TiN-coated) (2) (assembled with rod ends and steel hollow balls)

• 9662
  Shock shaft, 80mm (GT-Maxx®) (steel, chrome finish) (2) (assembled with rod ends and steel hollow balls)

• 9662T
  Shock shaft, 80mm (GT-Maxx®) (TiN-coated) (2) (assembled with rod ends and steel hollow balls)

• 9660
  Shocks, GT-Maxx®, aluminum (blue-anodized) (fully assembled w/o springs) (2)

• 9661
  Shocks, GT-Maxx®, long, aluminum (blue-anodized) (fully assembled w/o springs) (2)

• 8968X
  Spring retainer (adjuster), blue-anodized aluminum, GT-Maxx® shocks (4) (assembled with o-ring

• 8968G
  Spring retainer (adjuster), green-anodized aluminum, GT-Maxx® shocks (4) (assembled with o-ring)

• 8968A
  Spring retainer (adjuster), orange-anodized aluminum, GT-Maxx® shocks (4) (assembled with o-ring)

• 8968R
  Spring retainer (adjuster), red-anodized aluminum, GT-Maxx® shocks (4) (assembled with o-ring)

• 8966
  Springs, shock (natural finish) (GT-Maxx®) (1.210 rate) (2)

• 8967
  Springs, shock (natural finish) (GT-Maxx®) (1.450 rate) (2)

• 9659
  Springs, shock (natural finish) (GT-Maxx®) (1.487 rate) (85mm) (2)

• 9658
  Springs, shock (natural finish) (GT-Maxx®) (1.569 rate) (85mm) (2)

• 9657
  Springs, shock (natural finish) (GT-Maxx®) (1.671 rate) (85mm) (2)

• 8969
  Springs, shock (natural finish) (GT-Maxx®) (1.725 rate) (2)

Springs

• 8966
  Springs, shock (natural finish) (GT-Maxx®) (1.210 rate) (2)

• 8967
  Springs, shock (natural finish) (GT-Maxx®) (1.450 rate) (2)

• 9659
  Springs, shock (natural finish) (GT-Maxx®) (1.487 rate) (85mm) (2)

• 9658
  Springs, shock (natural finish) (GT-Maxx®) (1.569 rate) (85mm) (2)

• 9657
  Springs, shock (natural finish) (GT-Maxx®) (1.671 rate) (85mm) (2)

• 8969
  Springs, shock (natural finish) (GT-Maxx®) (1.725 rate) (2)

Spur Gears & Pinion Gears

• 9590
  Gear adapter, fixed (A)/ motor mount spacer

• 6482X
  Gear, 12-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw

• 6483X
  Gear, 13-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw

• 6487R
  Gear, 15-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

• 6489X
  Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

• 6491R
  Gear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

• 9651
  Spur gear, 46-tooth, steel (1.0 metric pitch)

• 9652X
  Spur gear, 52-tooth, machined steel (1.0 metric pitch)

• 9652
  Spur gear, 52-tooth, steel (1.0 metric pitch)

Steering Components

• 9525
  Bellcrank posts, steering (aluminum, blue-anodized)

• 9525-GRAY
  Bellcrank posts, steering (aluminum, gray-anodized)

• 9525-GRN
  Bellcrank posts, steering (aluminum, green-anodized)

• 9525-ORNG
  Bellcrank posts, steering (aluminum, orange-anodized)

• 9525-RED
  Bellcrank posts, steering (aluminum, red-anodized)

• 9546A
  Draglink, steering, 6061-T6 aluminum (dark titanium-anodized)/ 3x14mm SS (2)

• 9546G
  Draglink, steering, 6061-T6 aluminum (green-anodized)/ 3x14mm SS (2)

• 9546T
  Draglink, steering, 6061-T6 aluminum (orange-anodized)/ 3x14mm SS (2)

• 9546R
  Draglink, steering, 6061-T6 aluminum (red-anodized)/ 3x14mm SS (2)

• 9546
  Draglink, steering/ 3x14mm SS (2)

• 2277
  Gear set, metal (for 2275 servo)

• 9683
  Hollow balls, steel (8)

• 2278
  Servo case, aluminum (black-anodized) (middle) (for 2275 servo)

• 2276
  Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2275 servo)

• 9544
  Servo horn, steering, metal

• 9545A
  Servo saver post/ adjuster nut/ locknut (dark titanium-anodized, 6061-T6 aluminum) (1 each)

• 9545G
  Servo saver post/ adjuster nut/ locknut (green-anodized, 6061-T6 aluminum) (1 each)

• 9545T
  Servo saver post/ adjuster nut/ locknut (orange-anodized, 6061-T6 aluminum) (1 each)

• 9545R
  Servo saver post/ adjuster nut/ locknut (red-anodized, 6061-T6 aluminum) (1 each)

• 9545
  Servo saver/ servo saver spring/ servo horn, steering (assembled)

• 2255
  Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof

• 2275
  Servo, digital high-torque, metal gear (ball bearing), waterproof

• 9636X
  Steering block arms (aluminum, blue-anodized) (2) (fits #9635 series & 9637 series steering blocks)

• 9636A
  Steering block arms (aluminum, dark titanium-anodized) (2) (fits #9635 series & 9637 series steering blocks)

• 9636G
  Steering block arms (aluminum, green-anodized) (2) (fits #9635 series & 9637 series steering blocks

• 9636T
  Steering block arms (aluminum, orange-anodized) (2) (fits #9635 series & 9637 series steering blocks)

• 9636R
  Steering block arms (aluminum, red-anodized) (2) (fits #9635 series & 9637 series steering blocks)

• 9635X
  Steering blocks, 6061-T6 aluminum (blue-anodized), left & right/ steering block arms (2)/ 4x16mm BCS (with threadlock) (4)/ 3x18mm CS (2)/ 3x10mm BCS (with threadlock) (4)/ M3x0.5mm NL (2)

• 9635A
  Steering blocks, 6061-T6 aluminum (dark titanium-anodized), left & right/ steering block arms (2)/ 4x16mm BCS (with threadlock) (4)/ 3x18mm CS (2)/ 3x10mm BCS (with threadlock) (4)/ M3x0.5mm NL (2)

• 9635G
  Steering blocks, 6061-T6 aluminum (green-anodized), left & right/ steering block arms (2)/ 4x16mm BCS (with threadlock) (4)/ 3x18mm CS (2)/ 3x10mm BCS (with threadlock) (4)/ M3x0.5mm NL (2)

• 9635T
  Steering blocks, 6061-T6 aluminum (orange-anodized), left & right/ steering block arms (2)/ 4x16mm BCS (with threadlock) (4)/ 3x18mm CS (2)/ 3x10mm BCS (with threadlock) (4)/ M3x0.5mm NL (2)

• 9635R
  Steering blocks, 6061-T6 aluminum (red-anodized), left & right)/ steering block arms (2)/ 4x16mm BCS (with threadlock) (4)/ 3x18mm CS (2)/ 3x10mm BCS (with threadlock) (4)/ M3x0.5mm NL (2)

• 9537
  Steering blocks, left & right/ 4x16mm BCS (4)/ M4x0.7 NL (4)

• 9637X
  Steering blocks, left & right/ steering block arms (aluminum, blue-anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)

• 9637A
  Steering blocks, left & right/ steering block arms (aluminum, dark titanium- anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)

• 9637G
  Steering blocks, left & right/ steering block arms (aluminum, green-anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)

• 9637T
  Steering blocks, left & right/ steering block arms (aluminum, orange-anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)

• 9637R
  Steering blocks, left & right/ steering block arms (aluminum, red-anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)

• 9526
  Steering link (30mm) (1)/ hollow balls (2)

• 9549
  Toe links, front (120mm) (2) (assembled with hollow balls)

• 9549X
  Toe links, Sledge® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9549A
  Toe links, Sledge® (TUBES dark titanium-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9549G
  Toe links, Sledge® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9549T
  Toe links, Sledge® (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9549R
  Toe links, Sledge® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)
  Suspension Linkage

• 9547
  Camber links, front (117mm) (2) (assembled with hollow balls)

• 9547X
  Camber links, front, Sledge® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9547A
  Camber links, front, Sledge® (TUBES dark titanium-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9547G
  Camber links, front, Sledge® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9547T
  Camber links, front, Sledge® (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9547R
  Camber links, front, Sledge® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9548
  Camber links, rear (144mm) (2) (assembled with hollow balls)

• 9548X
  Camber links, rear, Sledge® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9548A
  Camber links, rear, Sledge® (TUBES dark titanium-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9548G
  Camber links, rear, Sledge® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9548T
  Camber links, rear, Sledge® (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9548R
  Camber links, rear, Sledge® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9546A
  Draglink, steering, 6061-T6 aluminum (dark titanium-anodized)/ 3x14mm SS (2)

• 9546G
  Draglink, steering, 6061-T6 aluminum (green-anodized)/ 3x14mm SS (2)

• 9546T
  Draglink, steering, 6061-T6 aluminum (orange-anodized)/ 3x14mm SS (2)

• 9546R
  Draglink, steering, 6061-T6 aluminum (red-anodized)/ 3x14mm SS (2)

• 9546
  Draglink, steering/ 3x14mm SS (2)

• 9683
  Hollow balls, steel (8)

• 9647
  Rod ends, standard (4) (assembled with hollow balls) (fits #9547/9548 series aluminum camber links & #9549 series aluminum toe links)

• 9544
  Servo horn, steering, metal

• 9540
  Suspension pin set, front & rear (hardened steel), 4x67mm (4), 3.5×48.2mm (2), 3.5×56.7mm (2)/ M3x0.5mm NL, flanged (4)

• 9541
  Suspension pins, inner, front or rear, 4x67mm (hardened steel) (2)

• 9542
  Suspension pins, outer, front, 3.5×48.2mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2)

• 9543
  Suspension pins, outer, rear, 3.5×56.7mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2)

• 9549
  Toe links, front (120mm) (2) (assembled with hollow balls)

Team Traxxas Items

• 2514
  Decal sheet, racing sponsors

• 9950
  Official Team Traxxas® racing decal set(flag logo/ 6-color)

• 9909
  Traxxas® racing banner, red & black (3×7 feet)

Tires & Wheels

• 9573A
  Tires & wheels, assembled, glued (3.8″ black chrome wheels, belted Sledgehammer® tires, foam inserts) (2)

• 9572T
  Tires & wheels, assembled, glued (3.8″ black chrome wheels, black chrome wheel covers, Sledgehammer® tires, foam inserts) (2)

• 9573
  Tires & wheels, assembled, glued (3.8″ black wheels, belted Sledgehammer® tires, foam inserts) (2)

• 9572
  Tires & wheels, assembled, glued (3.8″ black wheels, gray wheel covers, Sledgehammer® tires, foam inserts) (2)

• 9672
  Tires & wheels, assembled, glued (3.8″ black wheels, Sledgehammer® tires, foam inserts) (2)

• 9572A
  Tires & wheels, assembled, glued (3.8″ satin black chrome wheels, satin black chrome wheel covers, Sledgehammer® tires, foam inserts) (2)

• 9572X
  Tires & wheels, assembled, glued (3.8″ satin chrome wheels, satin chrome wheel covers, Sledgehammer® tires, foam inserts) (2)

• 8674
  Tires & wheels, assembled, glued (black 3.8″ wheels, paddle tires, foam inserts) (2) (TSM® rated)

• 8672
  Tires & wheels, assembled, glued (black wheels, Talon EXT tires, foam inserts) (2) (17mm splined) (TSM® rated)

• 8672G
  Tires & wheels, assembled, glued (green wheels, Talon EXT tires, foam inserts) (2) (17mm splined) (TSM® rated)

• 8672A
  Tires & wheels, assembled, glued (orange wheels, Talon EXT tires, foam inserts) (2) (17mm splined) (TSM® rated)

• 5670
  Tires, Canyon AT 3.8″ (2)/ foam inserts (2)

• 4973
  Tires, Maxx® 3.8″ (6.3″ outer diameter (160mm)) (2) (fits Revo®/T-Maxx®/E-Maxx)

• 8673
  Tires, paddle 3.8” (2)/ foam inserts (2)

• 5375
  Tires, Response Pro 3.8″ (soft-compound, narrow profile, short knobby design)/ foam inserts (2)

• 5471
  Tires, Response racing 3.8″ (soft-compound, narrow profile, short knobby design)/ foam inserts (2)

• 9670
  Tires, Sledgehammer® (2)/ foam inserts (2)

• 9571
  Tires, Sledgehammer® (belted) (2)/ foam inserts (2)

• 5171
  Tires, T-Maxx® 3.8″ (2) (fits Revo®/Maxx® series)

• 8670
  Tires, Talon EXT 3.8″ (2), foam inserts (2)

• 9569
  Wheel covers, black (4) (fits #9572 wheels)

• 9568T
  Wheel covers, black chrome (4) (fits #9572 wheels)

• 9569X
  Wheel covers, blue (4) (fits #9572 wheels)

• 9569A
  Wheel covers, gray (4) (fits #9572 wheels)

• 9569G
  Wheel covers, green (4) (fits #9572 wheels)

• 9569T
  Wheel covers, orange (4) (fits #9572 wheels)

• 9569R
  Wheel covers, red (4) (fits #9572 wheels)

• 9568A
  Wheel covers, satin black chrome (4) (fits #9572 wheels)

• 9568X
  Wheel covers, satin chrome (4) (fits #9572 wheels)

• 9567
  Wheel hubs, +5 mm (4), +10 mm (4) (fits #9572 wheels)

• 8654
  Wheel hubs, splined, 17mm (blue-anodized) (4)/ 4×5 GS (4), 3x14mm pin (4)

• 8654G
  Wheel hubs, splined, 17mm (green-anodized) (4)/ 4×5 GS (4), 3x14mm pin (4)

• 8654A
  Wheel hubs, splined, 17mm (orange-anodized) (4)/ 4x5mm GS (4)/ 3x14mm pin (4)

• 8654R
  Wheel hubs, splined, 17mm (red-anodized) (4)/ 4×5 GS (4), 3x14mm pin (4)

• 7758A
  Wheel nuts, splined, 17mm, serrated (black-anodized) (4)

• 7758
  Wheel nuts, splined, 17mm, serrated (blue-anodized) (4)

• 7758G
  Wheel nuts, splined, 17mm, serrated (green-anodized) (4)

• 7758T
  Wheel nuts, splined, 17mm, serrated (orange-anodized) (4)

• 7758R
  Wheel nuts, splined, 17mm, serrated (red-anodized) (4)

• 9671
  Wheels, 3.8″ (black) (2) (17mm splined)

• 8671
  Wheels, 3.8″ (black) (2) (17mm splined)

• 8671G
  Wheels, 3.8″ (green) (2) (17mm splined)

• 8671A
  Wheels, 3.8″ (orange) (2) (17mm splined)

Traxxas Tools

• 3433X
  Body reamer (aluminum handle)

• 3433
  Body reamer (plastic handle)

• 3436
  Cap, body reamer

• 3432
  Scissors, curved tip

• 3431
  Scissors, straight tip

• 8712
  Speed Bit Essentials Set, hex and nut driver, 7-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm, and 8.0mm), 1/4” drive

• 8720
  Speed bit handle, large (overmolded)

• 8721
  Speed bit handle, medium (one piece)

• 8722
  Speed bit handle, premium (rubber overmold)

• 8710
  Speed Bit Master Set, hex and nut driver, 13-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm), (ball-end: 2.0mm, 2.5mm, 3.0mm), and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4” drive

• 8711
  Speed Bit Master Set, hex driver, 7-piece straight and ball end, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm, 2.5mm, 3.0mm), 1/4″ drive

• 8719
  Speed Bit Master Set, nut driver, 6-piece, includes premium handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4″ drive

• 8716
  Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4″ drive

• 8716X

• Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm) 1/4″ drive
  8715
  Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4″ drive

• 8715X
  Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4″ drive

• 8714
  Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1 Phillips, and #2 Phillips bits), 1/4″ drive

• 2748R
  Tool set (includes 1.5mm hex wrench / 2.0mm hex wrench / 2.5mm hex wrench/ 4-way wrench/ 8mm & 4mm wrench/ U-joint wrench)

• 3415
  Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4mm drivers/4mm. 5mm, 5.5mm, 7mm, and 8mm nut drivers/ 2mm, 3mm, and 4mm slotted screwdrivers/ #00 Phillips, #0 Phillips, and #1 Phillips screwdrivers/ 4mm and 8mm wrenches/ driver handle)

Turnbuckles & Threaded Rods

• 9547
  Camber links, front (117mm) (2) (assembled with hollow balls)

• 9547X
  Camber links, front, Sledge® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9547A
  Camber links, front, Sledge® (TUBES dark titanium-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9547G
  Camber links, front, Sledge® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9547T
  Camber links, front, Sledge® (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9547R
  Camber links, front, Sledge® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9548
  Camber links, rear (144mm) (2) (assembled with hollow balls)

• 9548X
  Camber links, rear, Sledge® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9548A
  Camber links, rear, Sledge® (TUBES dark titanium-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9548G
  Camber links, rear, Sledge® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9548T
  Camber links, rear, Sledge® (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9548R
  Camber links, rear, Sledge® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9683
  Hollow balls, steel (8)

• 9647
  Rod ends, standard (4) (assembled with hollow balls) (fits #9547/9548 series aluminum camber links & #9549 series aluminum toe links)

• 9549
  Toe links, front (120mm) (2) (assembled with hollow balls)

• 9549X
  Toe links, Sledge® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9549A
  Toe links, Sledge® (TUBES dark titanium-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9549G
  Toe links, Sledge® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9549T
  Toe links, Sledge® (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)

• 9549R
  Toe links, Sledge® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)
  If you have questions or need technical assistance, call Traxxas at:

• 1-888-TRAXXAS
  (1-888-872-9927) (U.S. residents only)

For orders, calls outside the U.S., and other information, call 972-549-3000, or fax to 972-549-3011
e-mail Traxxas at support@Traxxas.com
TRAXXAS.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>