KBOD KB-TWS-C29 TWS Earphone User Guide
- June 1, 2024
- KBOD
Table of Contents
KBOD KB-TWS-C29 TWS Earphone User Guide
Please read this User Manual carefully before using this product and store it
properly Product Description
KB-TWS-C29 TWS wireless earphones are the new generation 5.3 wireless standard
that supports two ear calls. They use the touch control of KB-TWS-C29 TWS
portable wireless earphones, and the standard earphone device provides long-
lasting power, including a charging case, for users to use.
Product Specification Mode: KB-TWS-C29
Product Name:TWS Earphone
Wireless version; V5.3
Transmission Distance: 10 (open area) Music time: around 3 Hrs
Charging time: around 1 Hrs Standby time; 60 Hrs
Charging box capacity: 200mAh
Specifications
True Wireless Connection (TWS) achieves wireless stereo, left and right channel separation, and left and right ear sound effects, both of which have complete wireless functions and can be used alone or personally.
The parameters
Wireless version | BT 5.3 |
---|---|
Support protocol | HFP/A2DP/AVRCP/SPP |
Touch | Couch control |
Frequency range | 50Hz-20kHz |
Transmitting distance | Approx. 10 metres (actual test data) |
Product weight | 37g |
Duration | 3 hours(default setting when volume is turned |
on)
Case loading time| 3 hours
Sensitivity| -42 ± 3 dB
Packing list
| Ausbandmeter x1 Charging cable x1 Charging cable x1
User’s manualx1
Wireless pairing
For the first pairing, in the on state, press and hold the on/off buttons on
both sides of the earphones for about 4 seconds until both lights remain on;
Meanwhile, release them and all pairing information will be deleted
You will enter pairing mode and configure the left ear host. The next time you
turn on the device, simply press and hold the ear (4 seconds until the light
is on, the two headphones will quickly pair and connect, press and hold for 5
seconds) to turn off the headphones. Pairing earphones with smartphones: Open
the charging case, lift the wireless earphones, and open the phone at the same
time. Find the “KB-TWS-C29” device, click on pairing and connect the wireless
function, and start
using it. Attention: The call supports dual earphones, and can be turned off,
played, or paused through any multifunctional touch key on the connected
Awvido FCE. Other earphones will be synchronized for control. The next time
you open it, hold down the direct multifunction touch key to start, and it
will automatically connect.
Using wireless
All devices are in a connected state. Right ear: Short press play
pause/response hang up, press 3 times to increase volume, press 2 times for
the next song, hold for 2 seconds to start left ear; Short press play
pause/response up, press 3 times to decrease volume, press
For the previous song, press and hold for more than 2 seconds to activate the
Siri function. Suggestions; To prevent the earphones from automatically
connecting, it is recommended to turn off the wireless device when not in use
to avoid consuming and wasting the power of the earphones and devices.
The graphical representation of tactile sensation.
- Loading port
- Microphone
- Gauze powder
- Touch control
- Cargo box Touch Method
Previous track: Double click L Next track: Double click R Volume increase:
Three clicks L
Volume reduction: Three presses R
Voice Assistant: Long press for 2 seconds left/right Pause/Play: Press
left/right
Answer call: Press left/right
Hang up the phone: Press left/right Reject call: Double press left/right
Power off time: default 3 minutes, can be held down manually for 4-5 seconds
to turn off, default is on when placed in compartment
Take care
- Do not treat this product rudely, and do not press or squeeze it forcefully. Stay away from high temperature and humidity environments;
- Stay away from WFLs, routers, and other high-frequency devices, as they can affect the signals received by this product, resulting in silence and disconnection;
- When using this product within a valid range (less than 10 meters), do not set obstacles between wireless devices and headphones (such as walls);
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following
two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that
may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/ TV technician for help. FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. -
When the charging box screen shows charging as 0, it is an empty charging box. At this point, the automatic activation of the ear is ineffective and must be manually touched to turn it on. Connect to any device equipped with wireless
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>