KBOD PWR-12 10000mAh Suction Cup Wireless Power Bank User Manual
- September 24, 2024
- KBOD
Table of Contents
KBOD PWR-12 10000mAh Suction Cup Wireless Power Bank
Thank you
Thank you for purchasing our products. For your safe use of this product. please read the instructions carefully before use. Please keep this manual for future use.
Features
- Power bank ON/OFF Button
- Colorful LED screen
- USB-A output
- Type C input/output
- Wireless charging surface
- Magnetic surface
What’s included:
- 1x 10000mAh Wireless Power Bank
- 1x USB-A to Type C charging cable
- 1x Instruction Manual
- 1x Magnetic Iron Ring
tech Specification
-
Capacity: 10000mAh/3.85V/38.5Wh
-
Type C input: 5V=2.6A 9V=2A
12V=1.5A 18W(Max) -
Type C output:5V=3A 9V=2.22A
12V=1.67A 20W(Max) -
USS-A output: 5V=4.5A 9V=2A
12V=1.5A 22.5W(Max) -
Total Power: 22.5W
-
Wireless output: 5W/7.5W/10W/15W
LED Screen:
- Press the Power bank ON/OFF button(1) once to light up the dulled display to view voltage and remaining power capacity.
- Hold down the button for 3 seconds to turn OFF.
Instruction
-
Charging the Power Bank:
- Charge the power bank fully before usage.
- Connect the provided charging cable to a
- power source and to the Type-C Input (4) on the power bank.
- Once connected and charging, the LED screen will show input power and voltage. Once fully charged, the power capacity will
-
show 100% power capacity.
- Charging Electronic Devices with the Power Bank
- Connect the appropriate cable to your mobile phone/device.
- Connect the Type-C tip or USB-A tip of a cable to Type-C Output(4) or USB-A
- Output(3), the LED screen will show output power and voltage when charging.
- Remove the charging cable from your mobile device when fully charged.
-
Charging Electronic Devices with the Wireless Charging
- Press Power bank ON/OFF button(1) the LED screen will show the remaining power capacity, and the wireless charging symbol will flash once the power bank is in wireless charging standby mode.
- Place wireless charging enable device on Wireless Charging Pad(5). The device will begin to charge, the wireless charging symbol will show on the LED screen when charging.
- Remove your mobile device and power bank once fully charged.
Note: If the wireless charging symbol flashes on the screen, an unknown object is being detected between the wireless charging pad and the phone by FOD(Foreign
Object Detection). The power bank will not begin to charge until object is removed.
-
Magnetic Iron Ring
The magnetic iron ring can be stocked to your device or its case for a magnetic power bank alignment and attachment.
Safety Precaution
WARNING -When using this product, basic precautions should always be followed:
- Read all the instructions before use.
- Never store or use this product in temperatures below 32°F (0°C) or above 115°F (45°C).
- Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.
- The unit will only achieve full performance after 2 or 3 completed charge and discharge cycles.
- To reduce the risk of injury, close supervision is required when the product is used near children.
- Do not expose the device to moisture.
- Do not use the device in excess of its output rating. Overload outputs above the rating may result in a risk of fire or injury.
- Do not use the device if damaged or modified.
- Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
- Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury.
- Do not expose the device to fire or excessive temperatures. Exposure to fire or temperatures above 104 °F (40°C) may result in explosion.
- To ensure product safety, ensure that qualified service professionals use only identical replacement parts.
- Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove attachments from the phone before charging on this device.
- The strong magnetic fields of neodymium magnets can damage items such as television, computer monitors, credit cards, bank cards, computers, diskettes and other data carriers, video tapes, mechanical watches, hearing aids, loud speakers and VCRs. Pace-makers may be damaged or switch to “Test Mode” in the presence of a strong magnetic force, if a pace-maker or other electrical body implant is in use, keep a minimum of 3 feet distance.
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>