boAt Rockerz 109 Wireless Earphone User Manual

boAt Rockerz 109 Wireless Earphone User Manual

Volume “- button for 15 seconds.

10. Next Track: To skip 1o the next track, press and hold the volume “+” button for 15 seconds.
    (1) Reset Device (Clear Paired List): Press and hold the volume “+* and buttons simultaneously for 5 seconds o clear the previous st of connected devices, The red and bite LEDS wil flash for 1 second to indicate this
    ) Dual Pairing: To connect ‘Rockerz 109″ 1o two devices simultane- ously. first connect the earphones to one of the devices. Then, switch both the earphones and the device off, Thereafter, connect the arphones to the second device and switch the first device on again. The earphones wil get connected to both the devices. If not, connect the firs device manualy once again to activate dual pairing,
    (13) BEAST™ Mod: Tap the MFE thrice to switch between low latency BEAST™ Mode & Music Mode. A voice prompt willindicate both the activation and de- activation of BEAST™ Mode, Made for the Gamers – By Gamers, BEAST™ Mode redces the latency significantly and improves the overall gaming experience.
    (14) ENx™ Tech: Our ENX™ Tech algorithm cancels out the background Roise 50 that you can be heard crystal clear on calls. You dorr’t have to activate ENx separately as the mic is integrated with this technology and activated by default Deliver your voice without interruptions o matter where you are workspace, aitports, railway stations, roads: literally everywhere!
    (19) Volce Assistant: Long touch the MFB for 15 seconds to activate the smart voice assistant.

Manual

Thank you for choosing boAt Pockerz 109. Let this manual be your guiding map as you navigate the shores of musical bliss with these wireless neckband earphones. Knowledge of Bluetooth and device connection is essential for the usage of these neckband earphones. Therefore, we strongly recommend that this manual be read thoroughly before use and referred to in times of difficulty.

TO CHARGE

Type-C cable into the earphones and connect the other end to either alaptop or an adapter.

1.  Low Battery: When the charge of the earphones s less than 20% there is a ‘low battery’ prompt in every 10 minutes. The red LED blinks rapidly to indicate the same.
2.  Charging: Solid red LED indicates that the earphones are being charged. (Please note tha the earphones cannot be turned on while harging)
3.  Fully Charged: Once the earphones are charged completely, the red LED will turn off.

DUAL PAIRING:

Type-C cable into the earphones and connect the other end to either alaptop or an adapter.

1.  Low Battery: When the charge of the earphones s less than 20% there is a ‘low battery’ prompt in every 10 minutes. The red LED blinks rapidly to indicate the same.
2.  Charging: Solid red LED indicates that the earphones are being charged. (Please note tha the earphones cannot be turned on while harging)
3.  Fully Charged: Once the earphones are charged completely, the red LED will turn off.

PACKAGE CONTENTS

•  1x USB
• Type C charging cable
• 2xPairs of ad
• 1 Manual
• 1x Warranty Card
• 1x Catalogue

Specifation

Step 4: Switch on the Bluetooth of the first phone/media device again. The earphones are reconnected to the first phone/media device.
Step 5: Congratulations! Your earphones are now connected to both your devices successfully via Bluetooth

TO PAIR WITH BLUETOOTH

Step 1: When switched off, press and hold the MFB for 3 seconds to switch the earphones on. The earphones will automatically enter the pairing mode with a voice prompt. The blue and red LEDs flash alternatively to indicate this. Step 2: Open the Bluetooth function on your device and search for ‘Rockerz 109’ in the list of available device& Step 3: Choose ‘Rockerz 109’ from the list. If asked, enter the pairing password “0000” to establish Bluetooth connectivity, Step 4: Once successfully connected, a voice prompt will sound through the earphones. The blue LED will remain switched on for 3 seconds to Indicate the same. Note: The neckband automatically turns off if no pairing is established within 5 minutes.

SAFETY CAUTIONS

• Please don’t dismantle the product in any way or remove the product’s battery by yourself, as this can lead to a fire or electrical breakdown. Any maintenance or servicing of the earphones should be done only through a qualified service provider/manufacturer.
• Please clean the earphones with the utmost of care with only a damp soft cloth, if cleaning Is required. Please do not use any oily volatile liquid. In addition, ensure that the earphones are kept away from extremely hot or cold substances. • Any damage to the earphones that is NOT a manufacturing Issue will make the products warranty null and void.
• Do not use earphones when it is unsafe to be wearing them, such as while operating a vehicle, crossing a street, or during any activity where full awareness of your surroundings Is required.
•  To avoid damage to your hearing, make sure that the volume on your music player is at an appropriate level when you are putting on the earphone. Exposure to any noise levels at or above 85 dB can gradually lead to a loss of hearing.

CHARGING NORMS & GUIDELINES:

Charger/Adapter at 5V 2A and Standard Cable (35 strands 40.10 mm diameter/strand)

FUNCTIONS

1.  Power on: When switched off, press and hold the MFB (‘Multifunctional Button) for 3 seconds. A voice prompt will confirm the same. Also, blue LED will flash for 1 second to indicate this.
2. Power off: In any mode, press and hold the MFB for 5 seconds. This is followed by a voice prompt and the red LED flashes for 1 second before the device turns off,
3. Play/Pause: Single tap the MFB to play/pause music.
4.  Volume Up: Tap the volume “+” button In steps to increase the volume to your desired level. A voice tone will indicate maximum volume.
5. Volume Down: Tap the volume “-” button in steps to decrease the volume to your desired level. A voice tone will indicate minimum volume.
6.  Answer/End call: Tap the MFB once to answer an incoming call or end an ongoing call. (7) Reject call: Press the MFB twice during an incoming call to reject it. (8) Recital: Double tap the MFB to redial the last contacted number.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>