KBOD KB-BC55 Wireless Computer Speaker Instructions
- June 1, 2024
- KBOD
Table of Contents
KBOD KB-BC55 Wireless Computer Speaker Instructions
Product Schematic
Product specifications
Power rating: 2X5W
Frequency response: 120Hz-20kHZ
Sensitivity: 82dB+3dB
Imped: 40×2
Speaker Size: 45mm
Backlight: RGB
Power supply :DC5V-1.3A
Line length :1.36 m
Weight :550g
Product dimensions :88X88X115mm
Package Contents
Wireless computer speaker 2
Cable control box 1
Electronic instruction manual *1
System requirements
Wireless 5.2
3.5 mm audio device
USB interface device
Instructions for using power on
- Insert the two plugs at the output end of the control line into the USB ports on the two boxes respectively;
- correctly connect the USB plug and the 3.5 mm plug at the end of the control line for calculation;
- press and hold the M button on the cable control box to start up, the default mode is AUX. shutdown
Press and hold the M button on the cable control box to power off.
Wireless connection method
- double click the M button on the cable control box to switch to wireless mode;
- open the wireless settings, enter the search and proceed after you see the connection pairing with the screen name “KB-BC55” (after the device is paired with the screen name “KB-BC55”). (after the device is successfully paired with the speaker, the wireless speaker has a memory function, when using another device, please connect the mobile phone paired to the wireless function off, re-pair connection).
- Wireless must be enabled in the configuration to apply device detection. A device with compatible wireless hardware is required for full wireless functionality.
Instructions
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, Human proximity to the antenna shall not
be less than 20cm(8 inches)during normal operation. That changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.