YMG AURORA-204 Portable BT Party Speakers User Manual
- September 26, 2024
- YMG
Table of Contents
- YMG AURORA-204 Portable BT Party Speakers
- Product Information
- Product Usage Instructions
- Technical specifications
- Safety Precaution
- Front Panel Functions
- Remote Functions
- Important Instructions
- SAFETY MEASURES
- Questions and Answers
- After-Sales Service
- FCC Warning Statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
YMG AURORA-204 Portable BT Party Speakers
Product Information
Specifications:
- BT Wireless Standard: BT 5.0
- PMPO: 300W
- Rated Power: 60W
- Transmission Distance: 10m
- Drive Unit: 4.5×2+2×2 Aurora 204
- BT Name: AURORA 204
- DC Input: 5V
Product Usage Instructions
Front Panel Functions:
- Bluetooth Mode: Press this button to activate the BLUETOOTH mode and search for the device “AURORA 204” on your mobile phone.
- Music/Microphone Volume Switch:
- Short press the M-Mic Button to control MUSIC VOLUME (LED light blue).
- Short press the M-Mic Button again to control the MICROPHONE VOLUME (LED light green).
- Extra Bass: Press to toggle between stronger Bass output and normal music output.
- LED Effect: Press to shift the LED light effects or turn them off.
- Select Previous Song/Decrease Volume
- Play/Pause
- Select Next Song/Increase Volume
- Power Switch: Press for about 3 seconds to turn the speaker on/off.
- Battery Level Indicator
- DC Input 5V (Power Charge by AC/DC Adaptor or Type-C Cable)
- USB
- TF Card
- MIC Input
- AUX Input
Remote Functions:
- MUTE
- Bluetooth Mode: Press to activate BLUETOOTH mode and connect to “AURORA 204” on your mobile phone.
- Microphone Priority
- Extra Bass Output
- USB
- TF Card
- Repeat
- Microphone Volume Decrease key
- Microphone Volume Increase key
- LED Effect: Press to shift the LED light effects.
- Music Volume Increase key
- Previous key
- Play/Pause
- Next key
- Music Volume Decrease key
Instructions:
- Insert USB/TF card to play Mp3 tracks.
- If using KARAOKE, plug in a wired microphone cable.
- For full recharge, approximately 8 hours are needed.
- Recharge the unit only under the specified voltage.
- Full recharge after each use to protect the battery.
- To save battery power, switch off after use.
Frequently Asked Questions (FAQ):
Q: Why does the party speaker shut down automatically?
A: The Party Speaker’s battery is low; please charge it in time. It is
recommended to use it after six hours of charging.
YMG Portable BT Party Speakers with Rechargeable Battery and USB/AUX/Guitar/Mic.
Technical specifications
Safety Precaution
-
Power:
When working under AC power, please operate only under power indicated in the instructions or marked on the device. -
Caution for Electrical Shock:
Wet hands are unable to plug in or out the power plug to avoid electrical shock. Don’t suffer rain or watering! Vases or other vessels containing water cannot be placed on the main unit. -
This machine cannot bear heavy load:
Avoid sun rays hitting directly, and stay away from various heating sources such as stoves, radiators, and so on. Don’t be close to environments with much dust, high temperature, strong light strong magnetic field, etc. -
Power line protection:
Prevent the power line from being stepped on or pinched by heavy objects. Special attention should be paid to plugging the power Cord, outlets on the backboard, and sockets on the wall. Never pull or drag the power line. -
Do not dismantle the casing: Serious electric shock may occur if touching internal parts carelessly. Prevent metal pieces or liquid from dropping inside the machine from openings.
-
The plug as the device completely cut off from the power supply, It should keep easy operation. If the unit will not be used for a long time, Please unplug the power cord from the AC power Outlet.
Front Panel Functions
- Bluetooth Mode: press this button to activate the BLUETOOTH mode, search, and connect the device “AURORA 204” on your mobile phone.
- Music/Microphone Volume Switch:
- Press shortly the M-Mic Button, if the LED light in the front is blue, it’s in MUSIC VOLUME control, the user can press or decrease or increase the music volume;
- Press again the M-Mic Button, if the LED light turns green, it’s in the MICROPHONE VOLUME control, The user can press or decrease or increase the mic volume
- Extra Bass: press to have stronger Bass output; press again to normal music output.
- LED Effect: press to shift the LED light effects in the front. ( Press again can turn off )
- Select Previous Song/Decrease the Volume.
- Play/Pause.
- Select Next Song/Increase the Volume.
- Power Switch: press for about 3 seconds to turn on/off the speaker.
- Battery Level Indicator
- DC Input 5V ( Power Charge by AC/DC Adaptor or By Type-C Cable)
- USB
- TF Card
- MIC Input
- AUX Input
Remote Functions
- MUTE
- Bluetooth Mode: press this button to activate the BLUETOOTH mode, search, and connect the device “AURORA 204” on your mobile phone.
- Microphone Priority
- Extra Bass Output
- USB
- TF Card
- Repeat
- Microphone Volume Decrease key
- Microphone Volume Increase key
- LED Effect: press to shift the LED light effects in the front.
- Music Volume Increase key
- Previous key
- Play/Pause
- Next key
- Music Volume Decrease key
Important Instructions
- Insert USB/TF card to read Mp3 track
- When using the KARAOKE, please plug in your wired microphone cable.
- For full recharging, approximately 8 hours will be needed
- Please recharge the unit only under the voltage indicated in this manual or marked on the device.
- To protect the battery, please fully recharge every time after using up
- To save battery power, please put the power switch in the “OFF” position when finishes operation.
SAFETY MEASURES
To ensure proper use of the product, please take the time to read this instruction manual carefully before use. please observe all the instructions about safe operation and please keep this instruction manual in a safe place for future reference.
- Protection of power supply wire: Do not place the cable in the path of foot traffic. Don’t place heavy furniture on the cable, Never pull the cable to unplug the unit from the socket, always disconnect the unit from the main power supply by pulling the plug out of the socket.
- Ventilation: To prevent this unit from overheating, place it in a well-ventilated area on a stable surface. Never place it on a bed, sofa, or carpet where the ventilation will be restricted.
- Dismantling: To avoid the risk of electric shock, do not dismantle the unit, Should your unit be faulty or broken, please refer servicing to an authorized service center.
- Strange Odour: Should your unit emit any strange odor, immediately unplug it from the wall socket, do not use the unit again until you have had it repaired by a qualified service center.
- Do not expose the unit to heavy rain or in the Swimming pool, But Outdoor drizzling can be used.
Questions and Answers
Questions and Answers About YMG Bluetooth Party Speaker with Bass
Q: Why do The party speakers shut down automatically?
A: The Party Speaker’s battery is low, please charge it in time, it is recommended to use it after six hours of charging.
Q: The big Bluetooth speaker cannot be charged?
A: Please use the charging cable delivered by this Party box speaker to make sure that the voltage of the connected USB interface is normal.
Q: There is no sound from the party box speaker.
A: Make sure in the TF/USB/wireless connection/AUX mode, in the playback state, and adjust the volume to an appropriate level.
Q: There is no sound in the product AUX?
A: 1. Please use this machine to distribute the audio cable, and select the correct audio output interface. 2. Insert a TF card or USB disk, it will not automatically enter the AUX mode, need you to press the (M) key to switch to AUX mode. 3. Check Whether the volume of the external audio source device(For example CD Player/smartphone) is turned on and the volume is Max.
Q: The party speakers can't connect automatically?
A: 1. Only the paired devices will automatically connect. 2. If the wireless connection device is turned on after 10 seconds after the speaker enters the wireless connection, the speaker will not automatically connect.
Q: There is no sound from the wireless portable speaker.
A: 1. Please confirm whether the wireless connection has been successfully connected. 2. Whether the volume of the connected device or connected device is turned on & Adjusted to be Normal level.
After-Sales Service
- We promise that if the product has quality problems, it will be returned in one month.
- Guaranteed for 1 year Since your purchase day.
- And free consultation for life, welcome your consultation at YMG Store At AMAZON.COM
- If you are satisfied with our products, please comment on our service and share with your friends or classmates. Thank you for your participation and recognition. This will be our greatest motivation. If the product or service you are not satisfied, please contact us in first time, so that we can know the specific problem you encounter and provide you with a better solution.
- We are happy to help you answer any questions about the product. Welcome to Email us for consultation. Of course, you can also come to our official website to browse, we will provide you with friendly support.
Enterprise Mailbox:
Liyankang1997@gmail.com.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
co‐located for operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>