tracer Edgy 10L Shredder Instruction Manual

: September 26, 2024
: Tracer

Table of Contents

Edgy 10L Shredder
INSTALL GUIDE
OPERATION GUIDE AND REMARKS
ABNORMITY AND COUTERMEASURE IN USE
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Shredder Tracer Edgy 10L
Instruction manual

Edgy 10L Shredder

Tracer Edgy 10L

Dear customer,
Thank you for buying this quality product. Please read this instruction carefully before initial operation. Particularly take note of the following safety instructions. Please keep this instruction for future reference and pass it, when handing over this item.

Cautions:

Keep all loose articles of clothing, ties , jewelry, hair or other small items away from the feed opening to prevent injury.
Keep in the OFF position when the shredder is not in use for prolonged periods of time.
Remove all paper clips and staples from paper before shredding. Unit will cut sta- ples, however it is not recommended.
Do not place hands or fingers into the shredder throat as serious injury could result.
Always turn off or unplug the shredder prior to moving, cleaning or emptying the wastebasket.
Empty wastebasket frequently.
The document shredder must always be deactivated and disconnected from the electrical line prior to moving, transporting and cleaning the device and prior to emptying the waste basket.
Please do not leave the document shredder unattended e.g. in the event children or pets are nearby.
Please do not shred credit cards, CDs/DVDs and paper at the same time.
The device may not be operated with a damaged power cord.
For indoor use only.
WARNING: The device can only be used by children that are at least 8 years old and by people with limited physical and mental abilities and people with no previous experience and knowledge about the device only if proper guidance and supervision are ensured to guarantee using the device in a safe way and making all the dangers comperehensive. Children should not play with the device. Children without parental guidance should not process with the cleaning or maintenance process.
To protect the machine well, we suggest the user to operate it in this way: work 2 minutes then rest one hour.
Please do not spray any flammable gas or oil onto this shredder, it may cause fire.
This equipment is not intended for use by children. Avoid touching the media feed opening with the hands,clothing or hair. Unplug this equipment when not in use for an extended period of time. Hazardous moving part is in this equipment, keep body parts away from moving parts. This equipment is not suitable for use in locations where childern are likely to be present.
Sharp edges. Do not touch.

SPECIFICATIONS

Cutting Style: Strip cut
Entry Width: 220 mm
Shred Capacity: 6 sheets (A4 paper)
Input: AC 230V, 50Hz, 0.9A
Power: 190W
Operating cycle: 2 min on / 40 min off
Net weight: 1450 g

NAMES OF COMPONETS

3-Position slide switch for AUTO, OFF and REV.
Paper entry: Put paper into this entry to shred.
Credit card entry: Put credit card into this entry to shred.
Wastebasket: It is used to undertake the shredded paper.

SAFETY SYMBOLS
Warning: Please pay more attention to the safety instruction, before operate the machine otherwise wrong operation will result in danage to users.

| Product is not intended for use by children (product is not a toy)
---|---
| Avoid touching the document feed opening with hands.
| Avoid clothing and long necklaces or bracelets touching the document feed opening
| Avoid hair touching the document feed opening.
| Do not insert paper clips or staples into the infeed slot.
| Keep aerosol products away (for products incorporating a universal (brush) motor.

INSTALL GUIDE

Put the machine on flat table.
Insert the power plug into the corresponding electric socket and make sure that the working voltage complies with the supplying voltage.

OPERATION GUIDE AND REMARKS

Set the slide switch to “AUTO” position, at the same time, the machine is on standby; put the shredding paper, vertically into the entry, there after, it starts up automatically and does shredding; it returns to standby automatically after finishing.
When jam caused by inserting too much paper, or you want to withdraw the paper immediately at the normal shredding, please set the slide switch to ”REV”, at the same time, the machine does the reverse rotation and returns the paper that has not been shredded; then put the switch to “OFF”.
To ensure your machine has a long use life and exerts good shredding function, please notice the maximum number of shred paper. For continuous paper shredding in large quantity, please minimize the consecutive using time to 2 minutes. Hence, you can properly protect your shredder for higher efficiency.
If the machine works continuously or spasmodically for a long time, it may pause because the inside temperature increases continuously. After resting for a period of time, it can work again.
Please do not put clips, adhesive paper, adhesive tapes or cloth into the paper entry in order to avoid damaging the blades or lowering the shredding performance.
If you want to clean the wastebasket or the machine, or the machine is not used for a long time, please cut off the electric power and unplug the machine.

ABNORMITY AND COUTERMEASURE IN USE

Index	Abnormities	Cause	Countermeasure
1	After finishing the normal shredding, it runs ceaseles- sly yet.	Too much

scrapped paper in
the wastebasket, so that the just scrapped paper cannot fall and leave in the entry.| 1.Cut off the power, and empty the wastebasket.
2.Cut off the power, and press the scrapped paper down to make them away from the machine head.
2| Paper feed or positive rota- tion is normal, but there are still some scrapped paper hanging at the exit after finishing.| The slots of the blades clamp the scrapped paper.| Set the slide switch to “REV” (if need, please clean the scrapped paper at the exit).
3| It can’t work if feeding paper follows withdrawing paper.| Some scrapped paper lock
automatic inductive device.| Set the slide switch to “REV”.
4| Some paper is in the entry, but shredder does not work.| After feeding paper, any corner of the paper is inserted, but the rest doesn’t touch automatic inductive device.| Adapt to the position of the feeding paper and make it touch the auto-matic inductive device.
5| The paper is jammed, and the machine stops rotating.| 1.The number of the inserted paper is too larger than the limitation
2.Locked rotor makes the motor overheated and then temperature protection set takes action.| 1.Set the slide switch to “REV” and withdraw the shredding paper.
2.Unplug the plug and let the machine stop for a while.
6| The machine doesn’t start after inserting a sheet of paper, or stop running when paper is being inserted.| The paper is too thin, too soft, humid, or too crinkly to activate automatic inductive device.| 1.Fold the paper and then insert it.
2.Set the slide switch to “REV”.

The symbol of a crossed-out wheeled bin placed on electronic or electrical equipment, its packaging or accompanying documents means that the product may not be thrown out together with other waste.
Used equipment may contain substances with toxic and carcinogenic properties, hazardous to human health and life, and poisoning the soil and groundwater. It is the user’s responsibility to hand over the used equipment to a designated collection point for its proper processing. For more information on recycling of electronic and electrical equipment, please contact your local authorities, waste disposal services and the place where you purchased this product.
The household plays an important role in contributing to the reuse and recovery of secondary raw materials, including recycling, waste equipment. At this stage, attitudes are formed that affect the preservation of the common good, which is a clean natural environment.

Producent:
Megabajt Sp. z o.o., ul. Rydygiera 8, 01-793 Warszawa