OLIGHT Friendship 2024 Flashlight User Manual
- June 17, 2024
- OLIGHT
Table of Contents
USER MANUAL
Slim Tail Switch Flashlight
IN THE BOX
Table 1:
Specification
| COOL WHITE | CCT. 5100–6700K CRL 70 |
|---|---|
| HIGH | |
| HIGH | |
| 963cd | 62m |
| --- | --- |
(089 (0)Smm
(03.5·000.59%| l*1.5V AAA
Alkaline battery| Working temperature
0~40°C| 754/2.65a
(cluing Batteries)
- Above data are tested per ANSI/PLATO FL 1-2019 standard in Olight’s labs for reference.
Figure 1
Remove the insulating film
Figure 2
Turn on/off
Figure 3
Momentary on
Figure 4-1
Change brightness level(1)
Figure 4-2
Change brightness level(2 )
Figure 5-1
Set initial brightness level(l)
Figure 5-2
Set initial brightness level(2)
Figure 6
Battery Installation
AVAILABLE BATTERIES
- 1x 1.5V AAA alkaline battery (included)
- 1 x 10440 lithium battery
- 1 x AAA NiMH battery
Muti language dictionary see Table 2
- Product specification, see Table 1
- Operating instructions as below:
2.1 Remove the insulating film, see Figure 1.
2.2 urn o/oft, see Figure2.
Press the tail switch firmly (you will hear a click,)
2.3 Momentary on, see Figure 3.
Press it slightly to turn it on momentarily, and release it to turn it off.
2.4 Change brightness level(1), see Figure 41.
while the light is tumed on, press the tad switch firmly twice in a row.
2.5 Change brightness level(2), see Figure 42.
while the light is turned oft, press the tail switch slightly once and then press it firmly once.
2.6 Set initial brightness level), see Figure 5-1.
Press slightly. While the light is turned off, press the tail switch slightly five times in a row with intervals no longer than l second, and hold it down on the fifth press. The current brightness will tum on for1 second, and then change to the desired brightness level This indicates that the initial brightness has been set successfully 21 Set initial brightness level(2), see Figure5-2.
Press firmly. #While the light is trued off, press the tail switch firmly nine times After the ninth press, the current brightness level wil turn on for I second and then change to the desired brightness level. This indicates that the initial brightness has been set successfully.
2.8 Battery Installation, see Figure 6.
Unscrew the tail cap to insert the battery, ensuring that the positive end of the new battery faces the flashlight head, and then screw the tail cap back on.
WARNING
- Do not look directly at the light source or shine on the eyes, t may cause temporary blindness or permanent damage to the eyes.
- Don’t leave the battery near the fire or a heated source, or throw the battery into the fire.
- Do not give the product to children to play with, in order to avoid accidental swallowing.
- Don’t store, change or use this light in a car where inside of temperature may be over 60ºCor similar places.
EXCLUSION CLAUSE
0light is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual.
Table 2
Multi-language dictionary
| LOW | HIGH | Tap | Tap and hold | PRESS | Double press |
|---|
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or
replacement.
within 5 years of purchase: Contact 0light for repair or replacement.
This warranty does not cover normal wear and teat, modifications, misuse,
disintegrations, negligence, accidents, improper maintenance, or repair by
anyone other than an authorized retailer or light itself.
USA Customer Support
cs@olgttstore.com
Global Customer Support
contact@olightworld.com
visit www.olightworld.com to see our complete
product line of portable illumination tools
Dongguan 0light E-Commerce Technology Co., Ltd.
4th Floor, Building 4, Kegu Industrial Park
No. 62ongnan Road, Changan Town,
Dongguan City, Guangdong Chia
Made in China
3.4000.0702
A 09 21. 2023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>