BAUHN ADMAB-0222 Dual Monitor Arm with Gas Lift and Laptop Holder Installation Guide

Installation Guide
Model: ADMAB-0222
Dual Monitor Arm with Gas Lift and Laptop Holder

Hey!
Let’s get your new monitor bracket ready to use, fast!

Have you got everything?

Unpack the box (be gentle) and make sure all of these items are there:
A. Dual Gas Spring Monitor Bracket withUSB ports
B. Bracket Clamp
C. Laptop Holder
D. M4 x 8mm Screws (8)
E. M4 x 12mm Screws (8)
F. Screw Spacers (8)
G. M5 Nut (4)
H. M6 x 12mm Cap Screws (3)
I. M5 x 12mm Cap Screws (4)
J. 4mm Hex Key
K. 5mm Hex Key
L. Bracket Cover
M. Bracket Clamp Cover
N. Cable Cover (2)
O. Warranty Certificate
P. General Safety Warnings
Q. Installation Guide

You will also need a Phillips-head screwdriver to secure your monitors and the laptop holder to the bracket

Attach to your desk (Mounting to edge of desk)

1. Attach the bracket clamp to the base with the 3 M6 x 12mm cap screws. Use the 4mm hex key to tighten.
2. Adhere the bracket cover and the bracket clamp cover to the support block of the bracket clamp.
3. Tighten the securing bracket by turning the adjuster anti-clockwise and make sure it’s tight. If your desk is too thick, adjust the clamp down a notch and re-tighten.

Attach to your desk (mounting to desk cable opening)

1. Loosen the two screws that connect the two parts of the clamp.
2. Put the arm through the hole in your table.
3. Install the lower part of the clamp with the two screws.
   Tighten the clamp until it is securely fastened to the desk.

Nearly done!
Just a bit more on the other side of this page…

Mount your monitors

1. Install the upper two screws but don’t screw them completely just yet. Hang the monitor on the mounting plate.
2. Install the lower two screws. Now you can fasten the upper two screws all the way.

If your monitor is 75 x 75mm mounting pattern, use the inner 4 holes on the monitor mounts.
We have included two sizes of screws and spacers to suit most monitors. Select the appropriate screw length to best suit your installation. If you need to use the spacers, place them between your monitor and the mounting plate.

Attaching the Laptop Holder

You can also hold your laptop with the included laptop holder instead of having a dual monitor setup.

1. Install the supplied M5 x 12mm cap screws and M5 nut to join the laptop holder onto the bracket using the 4mm hex key.
2. Adjust the position of the laptop holder to desired position.
   Place the laptop onto the laptop holder.

Adjust to your space

It’s important to make your workspace as ergonomic as possible.
This bracket allows you to adjust the height, tilt and swivel of your monitor and laptops position, so that it’s truly fitted to your space and sitting.
To lock in your adjusted position, you will need to tighten the bolt on the mounting plate using the supplied 5mm hex key.
Use the 5mm hex key to adjust the height tension of the gas spring arm. This keeps monitors stable at any position.
The heavier the monitor, the further you’ll need to turn to the + symbol.

Hide those cables

You can tuck away those unsightly cables into the bracket arm itself.
Tuck the cables into the underside of the lower bracket arm.
Run the cables along the arm until they reach the compartment on the upper part of the arm.
Secure the cables by locking the compartment cover onto the arm.

Give us a call

What? You mean this Installation Guide didn’t have ALL the answers? Speak to us! We’d love to help you get up and running as quickly as possible. Call our After Sales Support on 1300 002 534.
Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST

Your new Monitor Bracket is ready to enjoy!

Well done, you made it.
Now sit back and relax… your new monitor bracket is
automatically covered by a 1-year warranty.
How nice!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>