BOSCH 8750000018 Smart Home Motion Detector Instruction Manual

BOSCH 8750000018 Smart Home Motion Detector Instruction

Start making your home smart!

Please be sure to install the Bosch Smart Home Controller first.

• Ensure that you have a Bosch Smart
• Home Controller and the Bosch Smart
• Home App, and that you have set both of them up successfully.

You can also use the explanatory video on our website to help you install your Bosch Smart Home Motion Detector more easily: www.bosch- smarthome.com/installation

Set up your product in just three steps

• Separating the housing and mounting bracket
• Start the Bosch Smart Home App and select “Add device”
• Scan the QR code and follow the instructions

Dear customer,
Congratulations on purchasing your Bosch Smart Home Motion Detector. It will help you to make your home even safer and smarter. It reliably detects movement using passive infrared technology, an additional temperature sensor and an intel-ligent algorithm. Thanks to the integrated pet immunity function, false alarms trig-gered by pets weighing up to 25 kg can easily be avoided. The Bosch Smart Home App immediately warns you in the event of unauthorized entry into your home or if the Motion Detector is tampered with. The Motion Detector is quickly integrated into your system via the Bosch Smart Home Controller.
We hope you enjoy your new product, The Bosch Smart Home Team

PRODUCT DESCRIPTION

The network-enabled Motion Detector with passive infrared technology
(PIR) is equipped with the following components:

• Lens with 7 x 11 segments
• 90° and 12 m detection range
• Sneak-by guard or pet immunity
• Theft protection
• One long-life, replaceable battery

The device reliably warns you in the event of unauthorized entry into your house or your apartment. The app provides information on the room and the time of the alarm.

Intended use
The product must only be used together with original Bosch Smart Home compo- nents, and is for indoor use only.

• Follow the safety instructions and the directions in this manual and the Bosch Smart Home App to ensure that the product is set up correctly

• Please note the details in
  the Technical Data section

• Avoid installing in areas prone to high amounts of dust, direct sunshine or heat

Do not modify the product in any way. Any other use is considered unintended use. We will not assume liability for any resulting damage.

IN THE BOX

• The scope of delivery includes a battery (123A) with a typical service life of around five years. For a longer service life, you can also insert a second battery into the battery compartment.
• To operate the Motion Detector you will require the app, a Controller and an internet connection.

WARNING NOTICES
Explanation of symbols

• Warning.
  This alerts you to danger.

• Info.
  Indicates important information.

Safety instructions

Proper handling of batteries

• Take the batteries out of the device if it is not used for a prolonged period of time
• The enclosed batteries are not suitable for charging

THE MOTION DETECTOR

Product overview

1

| LED indicator| Status/fault
Red| Fault, functional test
Orange| Configuration process, update
Green| Configuration successful
2| Sensor area| With lens
3| Sneak-by guard| Increased security

Motion Detector – front side of housing

1

|

Green rotary switch

| For setting pet immunity/sneak-by

guard

2| QR code| Scan for device

identification

3| Contact switch| For device resetting

and theft protection

Motion Detector – rear side of housing

4

|

Theft protection

| Remains on wall

in case of theft and sends

signal

5| Turn lock| For separating the housing

and mounting bracket

Motion Detector – front side of mounting bracket

123A battery

2| Battery compartment

with placeholder

| Option for another

battery

Motion Detector – battery compartment

INSTALLATION AND SETUP

Before you start
Ensure that you have a Bosch Smart Home Controller and the Bosch Smart Home App, and that you have set both of them up successfully.
You can also use the explanatory video on our website to help you install your Bosch Smart Home Motion Detector more easily: www.bosch- smarthome.com/installation

Separating the housing and fixing bracket

• Separate the Motion Detector’s housing from the mounting bracket. To do so, use a screwdriver to twist the turn lock on the underside of the
• Motion Detector counterclockwise by 180°, and simultaneously pull away the housing from the mounting bracket.

Starting the app and scanning the QR cod
Now start the Bosch Smart Home App and select “Add device”. From this point, the app guides you through the installation process. You will find a detailed description in this instruction manual. The app will prompt you to scan the QR code on the product. You will find the QR code on the back of the housing (see p.15).

Inserting the battery compartment
Insert the battery compartment from above into the Motion Detector’s housing. The LED will start to flash orange. A battery is included in the scope of delivery. In order to double the service life, you can also insert a second battery into the battery com-partment. To do so, remove the placeholder from the battery compartment.

Configuring the device
As soon as the battery is inserted, the Motion Detector connects to the Controller. The Motion Detector’s LED indicates the status of the configura- tion attempt using the following flash codes:
The app informs you if the configura-tion was successful.

FIXING

Fixing instructions
Prevailing regulations must be observed when installing the product. Failure to comply with the regulations can lead to material damage and/or physical injury.

• Check that the scope of delivery is intact. Only install parts that are in immaculate condition
• Observe the instructions regarding the installation location
• Pay attention to the direction of movement when installing (lateral motion detection)
• You can find more information in the online FAQs at: www.bosch-smarthome.com/faq

Observe the following mounting instructions:

• Mount the Motion Detector at a height of minimum 2.20 m to maximum 2.70 m, as desired

• The product has a detection range of 90° and 12 m

• In addition the sneak-by guard can be activated

• There must not be any windows in the detection area of the Motion Detector

• Avoid direct or indirect sunlight in the detection area of the Motion Detector

• Do not block the detection area with objects

• Do not install the Motion Detector near rotating objects (e.g. fans) or independently moving objects

• Do not install the near sources of heat or cold

• Do not place any objects on which pets can climb in the detection area

• Place the Motion Detector in the part of the room which is most frequently walked through (e.g. near the door)

Take the Motion Detector to your chosen mounting location. Before mounting, use the app to perform a communication test in order to check the signal strength.

• The connection with the Bosch Smart Home Controller needs to be sufficiently strong (you can perform a communication test using the app)

Choosing the type of fixing

The Motion Detector can be mounted in a corner or on a straight wall. In both cases, you can either mount the device with screws or with adhesive tape.

The device’s theft protection function can only be guaranteed if the Motion Detector is installed with screws. If the Motion Detector is forcibly removed, the theft protection remains on the wall and emits a signal.

Corner fixing with screws

• Punch through the four pre-punched screw holes in the Motion Detector’s mounting bracket.
• Hold the mounting bracket against the desired position on the wall and mark the drill holes.

When choosing a fixing location and when drilling, pay attention to potential electrical lines and/or supply lines that could be behind the wall. Mount the Motion Detector with screws and plugs.

Corner fixing with adhesive tape
When fixing the Motion Detector with adhesive strips, the theft protection function cannot be guaranteed.

• Attach the adhesive tapes to the beveled surfaces of the Motion Detector’s mounting bracket and peel off the second protective film.

Place the Motion Detector in the de-sired position and press it down firmly.

Wall fixing with screws

• Punch through the three pre-punched screw holes in the Motion Detector’s mounting bracket.
• Hold the mounting bracket against the desired position on the wall and mark the drill holes.

When choosing a fixing location and when drilling, pay attention to potential electrical lines and/or supply lines that could be behind the wall.

Fix the Motion Detector using screws and plugs.

Wall fixing with adhesive tape
When attaching the Motion Detector with adhesive strips, the theft protec- tion function cannot be guaranteed.

• Attach the adhesive tapes to the back of the Motion Detector’s mounting bracket and peel off the second protective film.
• Place the Motion Detector in the de-sired position and press it down firmly.

Selecting pet immunity or sneak-by guard Set the desired sensitivity level on the Motion Detector. When doing so, you can choose between the pet immunity and sneak-by guard functions. Upon delivery, the product is set to pet immunity with the rotary switch on the rear side of the housing turned to the left. For the sneak-by guard, turn the rotary switch to the right.
If pet immunity is activated, small ani-mals (< 25 kg) ignored by the Motion Detector’s front sensor. The sensor directed downwards is then switched off. When pet immunity is activated, the sneak-by guard is deactivated. When pet immunity is switched off, the sneak-by guard is activated, making it also possible to detect people who are beneath the Motion Detector. As a result, there is a possible risk of false alarms if you have pets.

Inserting the Motion Detector into the mounting bracket

Insert the Motion Detector into the mounting bracket from the bottom up until you hear it click into place.

FUNCTIONAL TEST

Once installed, the product’s functiona-lity needs to be checked. Start the fun-ctional test via the app. Cross the room in order to test the detection range. The Motion Detector will flash red every time it detects movement. When crossing the room, pay attention to the route that a trespasser would be most likely to take.

MAINTENANCE AND CARE

The product is maintenance-free. Repairs should only be performed by qualified persons. Clean the product with a soft clean dry and lint-free cloth. Do not use cleaning agents containing solvents.

Incorrect handling (see notes on intended use) or non-observance of hazard warnings may compromise the protection afforded by the device.

PRODUCT DETAILS

Technical data**** Device type name| Bosch Smart Home Motion Detector

RFPR-ZB-SH-EU

---|---
Batteries| 123A
Battery life| Up to 5 years1)
Radio frequency| 2.4 GHz
Max. transmission power| 8 dBm
Protocol| Based on ZigBee HA1.1 with extended

encryption technology

1. 5 years, based on typical storage temperature (-10 to 55°C), ambient temperature, 160 motion detections/day and 2 software renewals of the device/year. High temperatures over 50 °C shorten the lifetime.

Declaration of conformity

Hereby, Robert Bosch Smart Home GmbH declares that the radio equip-ment type Bosch Smart Home Motion Detector is in compliance with Directi-ve 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: www.bosch-smarthome.com/ EU-declarations-of-conformity

Faults in radio operation

Faults in radio operation (e.g. due to electric motors or defective elec- trical devices) cannot be ruled out. The radio range inside buildings may differ greatly from the radio range in free-field conditions. Apart from the transmission power and the receiver characteristics, environmental influ-ences such as humidity and structural characteristics may also influence radio operation.

Eanvironmental protection and disposal

Electrical and electronic equipment that is no longer usable and defective or used batteries must be separated from other waste and recycled in an environmentally friendly manner (European Directive on waste electrical and electronic equipment).To dispose of electrical and electronic equipment or batteries, use your country-specific return and collection systems.

FURTHER INFORMATION

You can find more detailed information on operating and maintaining the Motion Detector in the online FAQs at www.bosch-smarthome.com/faq

You will also find all contact details on the rear side of this document.

Sale and transfer
Before you transfer or sell your device, delete your personal information. To do this, reset the device to its factory settings (see online FAQs).

INTERCONNECTED SMART HOME PRODUCTS

Save on heating costs, protect your valuables, create mood lighting and much more: Bosch Smart Home offers a complete, intelligent system to make your life more comfortable, safer and more sustainable.
More at www.bosch-smarthome.com

Robert Bosch Smart Home GmbH Schockenriedstraße 17
70565 Stuttgart, Germany
00800 8437 6278 (free)
Mon–Fri 7:00 am–8:00 pm
Sat 8:00 am–6:00 pm
service@bosch-smarthome.com

References

• Control4 Smart Homes
• Welcome to Bosch Smart Home | Bosch Smart Home
• Welcome to Bosch Smart Home | Bosch Smart Home
• Welcome to Bosch Smart Home | Bosch Smart Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>