VELUX BM-IA007-XX FSLC Fixed Skylight Instruction Manual

Table of Contents

Q: How do I clean the blinds?
- A: To clean the blinds, gently wipe them with a damp cloth or use a mild detergent solution. Avoid harsh chemicals or abrasive materials that may damage the fabric.
Q: Can the blinds be operated manually?
- A: The Solar BM-IA007-XX Accessory Electrical Blinds are designed for electrical operation only and do not have a manual control option.

Read instructions carefully before installation and operation. Keep instructions for future reference, and hand them over to any new user.

Safety

VELUX solar blinds FSLC/FSLD/FSLH/FSLJ/FSLF/FSCC/FSCD/ FSCH/FSCF can be used by persons (aged 8 years and above) with sufficient experience and knowledge if they have been given instruction concerning safe use and understand the hazards involved. Cleaning and user maintenance must not be carried out by unsupervised children.
Children must not play with the blind.
Do not operate the blind if repair or adjustment is required.
Before operating, ensure that the blind can be operated without risk of damage to property or injury to people or animals.

Radio frequency band: 2.4 GHz.
Radio frequency range: 110 yd (100 m) free field. Depending on building construction, the indoor range is approx. 30 ft (10 m). However, constructions with reinforced concrete, metal ceilings, and plaster walls with steel members may reduce the range.
FCC ID: XSG866062; and IC: 8642A-866062.
Control:
- FCC ID: XSG831641;
- IC: 8642A-831641; and Certificate of
- Radio Equipment in Japan: No. 201-180272.

These devices comply with part 15 of the FCC and RSS-210 of the IC rules.

Operation is subject to the following two conditions:

These devices may not cause harmful interference, and
these devices must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.

FCC Radiation Exposure Statement: These devices comply with FCC RF radiation exposure limits set forth for an uncontrolled environment.
The term “IC:” before the device certification number signifies that the Industry Canada technical specifications were met.

The blind is operated by a control with three keys: OPEN/UP, STOP, and CLOSE/DOWN.
An automatic ”power on” function is triggered (one time only) in the first hours during which the product is exposed to sunshine – even if the product has been switched off during installation. The installation is considered completed when this function has been triggered.

Batteries and waste

Maintenance and installation must be carried out in consideration of health and safety at work requirements.
There are no serviceable parts inside the blind.
The blind requires minimal maintenance. It can be cleaned with a soft, damp cloth.
Before any service work or disconnection of the solar blind, it must be powered off by pressing the button behind the end cap of the top cover twice (the motor makes a buzzing noise three times).
It can be turned on again by pressing the same button once and subsequently, within 30 seconds, pressing first the STOP key and then the UP or DOWN key on the control.
This will result in a new automatic adjustment of the blind to the skylight height.
Spare parts are available through your VELUX sales company. Please provide information from the data label.
If you have any questions, please contact your VELUX sales company.

Installation of the blind can be carried out in two ways:

A With most skylights, the top part and the sides of the blind are installed individually.
- Note: If the skylight can be opened, this may ease the installation of the sides of the blind.
B For skylight FS in the listed sizes, the blind must be partially assembled before installation in the skylight.