CADDXFPV GM1 Support Head Track User Manual
- September 25, 2024
- CADDXFPV
Table of Contents
CADDXFPV GM1 Support Head Track
USER MANUAL
Connection and Use
1. Connect to the USB port of Avatar V2 VTX, and need to use Avatar Goggles that support head tracking to realize wireless head tracking function.
2. PM1
The channel is for gimbal working mode selection, there are three working
modes in total.
1: Pitch and roll keep level, yaw axis follows.
2: Pitch axis keeps level, roll axis and yaw axis follow.
3: Three-axis follow.
PM2
The channel is for gimbal follow sensitivity settings. Adjust the response
speed of the gimbal follow. Please use the knob channel on the remote control
to control.
PM3
The channel is the gimbal pitch axis control channel. Please use the rotary
switch on the remote controller to control it. The gimbal rotation angle range
can be changed by modifying the channel range of the remote control.
Installation Dimensions
INSTALLATION DIMENSION
CADDXFPV Support
Email: support@caddxfpv.com
This content is subject to change.Download the latest version from
https://www.caddxfpv.com
Specifications:
-
Model: GM1
-
Camera Compatibility: PWM / UART Support
-
Image Stabilization: Yes
-
Max Controllable Speed: 1.0W
-
Max Controlled Rotational Range: Not specified
-
Size: 32.2×38.1×20.5mm
-
Weight: 16g
-
Control Mode: PWM / UART
-
Head Tracking: Yes
-
Control Voltage: 7~26V
-
Static Power Dissipation: Not specified
-
-
Frequently Asked Questions (FAQ):
Q: What is the purpose of PM1, PM2, and PM3 channels on GM1?
A: PM1 is for gimbal working mode selection, PM2 adjusts follow sensitivity, and PM3 controls the pitch axis of the gimbal.
Q: How can I adjust the response speed of gimbal follow on GM1?
A: Use the knob channel on the remote control to adjust PM2 for sensitivity settings.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>