CADDXFPV GM2 Walksnail Avatar HD Pro Kit User Manual
- September 24, 2024
- CADDXFPV
Table of Contents
GM2 Walksnail Avatar HD Pro Kit
“`html
Specifications:
- Model: GM2
- Camera Compatibility: PWM / UART Support
- Image Stabilization: Yes
- Max Controllable Speed: Not specified
- Max Controlled Rotational Range: Not specified
- Size: 46.7 x 46.5 x 26.2mm
- Weight: 30g
- Control Mode: PWM / UART
- Head Tracking: Yes
- Control Voltage: 7~26V
- Static Power Dissipation: 1.2W
Product Usage Instructions:
Connection:
- Connect the GM2 to the USB port of Avatar V2 VTX.
- Ensure you have Avatar Goggles that support head tracking for
wireless head tracking function.
Functionality:
GM2 has several channels for different functions:
-
PM1: Gimbal working mode selection with three
modes available. -
PM2: Gimbal follow sensitivity settings.
Adjust using the knob channel on the remote control. -
PM3: Gimbal pitch axis control. Adjust using
the rotary switch on the remote controller. -
PM4: Gimbal yaw control. Adjust using the wave
wheel switch on the remote control.
Channel Modification:
You can modify the channel range on the remote control to change
the gimbal rotation angle range for PM3 and PM4 channels.
Frequently Asked Questions (FAQ):
Q: What is the voltage range supported by GM2?
A: GM2 supports a voltage range of 7V to 26V.
Q: How do I adjust the gimbal follow sensitivity?
A: Use the knob channel on the remote control to adjust the
gimbal follow sensitivity via PM2 channel.
Q: What are the different working modes available in PM1?
A: PM1 offers three working modes: 1. Pitch and roll keep level,
yaw axis follows. 2. Pitch axis keeps level, roll axis and yaw axis
follow. 3. Three-axis follow.
“`
GM2 USER MANUAL
Connection and Use
VCC(7V-26V)
1
GND
RX
TX
PWM 1
PWM 2 PWM 3
2
PWM 4
1 Connect to the USB port of Avatar V2 VTX, and need to use Avatar Goggles
that support head tracking to realize wireless head tracking function.
2 PM1 The channel is for gimbal working mode selection, there are three
working modes in total. 1: Pitch and roll keep level, yaw axis follows. 2:
Pitch axis keeps level, roll axis and yaw axis follow. 3: Three-axis follow.
PM2 The channel is for gimbal follow sensitivity settings. Adjust the response
speed of the gimbal follow. Please use the knob channel on the remote control
to control.
PM3 The channel is the gimbal pitch axis control channel. Please use the
rotary switch on the remote controller to control it. The gimbal rotation
angle range can be changed by modifying the channel range of the remote
control.
PM4 The channel is the gimbal yaw control channel. Please use the wave wheel
switch on the remote control to control it. The gimbal rotation angle range
can be changed by modifying the channel range of the remote control.
Model Camera Compatibility Image Stabilization Max Controllable Speed Max Controlled Rotational Range Size Weight Control Mode Head Tracking Control Voltage Static Power Dissipation
GM2 19mm FPV Camera ±0.005° ±1500°/s Pitch: ±120°; Roll: ±60°
46.7×46.5×26.2mm 30g PWM /UART Support 7~26V 1.2W
Installation Dimensions
35 2.1
41.9
Unit: mm
GM2
VCC(7V-26V)
1
GND
RX
TX
PWM 1
PWM 2 PWM 3
2
PWM 4
1 Avatar V2 VTXUSBAvatar Goggles
2 PM1 1 2 3
PM2
PM3
PM4
GM2 19mm FPV ±0.005° ±1500°/s : ±120°; : ±60°; 46.7×46.5×26.2mm 30g PWM /UART 7~26V 1.2W
35 2.1
41.9
: mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>