JENSEN Mobile JS6504 Series Car Audio Speakers Owner’s Manual
- September 24, 2024
- Jensen Mobile
Table of Contents
JS6504 Series Car Audio Speakers
“`html
Specifications:
-
Model: JS6504, JS6804, JS6904
-
Top-Mounting Depth: 2.28 inches (JS6504), 2.17
inches (JS6804), 3.0 inches (JS6904) -
Cut-Out Diameter: 5 x 7.10 inches (JS6504),
5.60 inches (JS6804), 6 x 8.58 inches (JS6904) -
Bottom-Mounting Depth: 0.28 inches (JS6504),
0.59 inches (JS6804), 0.39 inches (JS6904) -
Frequency Response: 87Hz-20kHz (JS6504,
JS6804), 50Hz-20kHz (JS6904) -
Power Handling: 40-160 watts (JS6504, JS6804),
50-200 watts (JS6904)
Product Usage Instructions:
Mounting:
-
Determine the mounting location ensuring it is large and deep
enough for the speaker. -
Refer to the specification chart to find the correct hole
diameter for your speaker model. -
Use the grille as a template to mark screw locations. Drill
holes with a 3/32 bit. -
Observe proper polarity when connecting wires (+ symbol
indicates positive terminal). -
Fit the speaker into the cut-out hole and secure with supplied
screws. Use grille if desired.
FAQ:
Q: How do I register my product?
A: You can register your product online at
www.jensenmobile.com
Q: What should I do if I require service?
A: Keep your original sales receipt as proof of purchase and
contact Dual Electronics Corporation at
1-866-382-5476 during
business hours.
Q: Can I use these speakers in a marine environment?
A: These speakers are designed for car audio use and may not be
suitable for marine environments due to exposure to water.
“`
JS6504 JS6804 JS6904
JENSEN·
Dual Electronics Corporation Toll Fr ee:
1-866-382-5476
9AM-5PM EST. Monday – Friday
www.jensenmobile.com ©2024 Dual Electronics Corp. All rights reserved.
NSA0424-V1
INSTALLATION/OWNER1S MANUAL
Car Audio Speakers
®
JENSEN
JENSEN·
Installation
Thank you for purchasing the JS Series car speakers. Although Jensen has
attempted to make sure all of the information contained within this manual is
accurate. please be aware that any part of it is subject to change without
notice.
.fil. The following instructions should be used a general guideline only.
CAUTION If you are unsure about performing any of the procedures listed below.
please consult a professional car audio installation center. Before
installation. please follow these guidelines, 1. Be sure to carefully read and
understand the instructions before attempting to install this product. 2. For
safety. disconnect the negative terminal from the battery prior to beginning
the installation. 3. Use the highest quality connectors for a reliable
installation and to minimize signal or power loss. 4. Use caution before you
drill or cut! Be careful not to cut or drill into gas tanks. fuel lines. brake
or hydraulic lines. vacuum lines or electrical wiring when working on any
vehicle. 5. Never run speaker wires underneath your vehicle. Running speaker
wires inside the vehicle provides the best protection from exhaust heat and
environmental elements. 6. Avoid running wires over. near. or through sharp
edged surfaces. Use rubber grommets to protect any wires routed through metal.
7. When running the speaker cable from the amplifier. avoid running it near
sources of high current (i.e. wiring harnesses. battery cables).
2
JENSEN·
Notes
7
JENSEN·
Registration
For Your Records
Please keep your original sales receipt and be prepared to provide it in the event you require service. Your original receipt is considered the best proof of purchase and indicates the date you purchased your Jensen product.
Dealer Name Dealer Phone Purchase Date ___
Register Your Product Register your product online at www.jensenmobile.com
JENSEN·
Mounting
1. Determine where the speakers will be mounted. Make sure the area is large
enough for the speaker to mount evenly. Also ensure the mounting location is
deep enough for the speaker to fit.
2. Refer to the specification chart to determine the proper diameter hole to
cut for your speaker model.
3. If needed. use the grille as a template to mark the locations for the
mounting screws. Drill the holes with a 3/32″ bit.
4. Be sure to observe proper polarity when connecting the wires. The
speaker’s positive terminal is indicated with a “+” symbol.
5. Fit the speaker to the hole cut-out and mount using the supplied screws.
If using the speaker grille. insert 4 screws into the grille holes and mount
the speaker.
JS6904
JS6504
JS6804
L/. Mounting/)
Cut-out
6
3
JENSEN·
Specifications
TOP-MOUNTING OEPlH
CUT-OUT OIAMETER
BOTTOM-MOUNTING OEPlH
The above diagram is to be used with the specifications matrix guide below. Design and specifications subject to change without notice.
JS6804 .67″”
JS6504 JS6904
..8779·”·”
2.28″”
.28″”
2.17″”
.59″”
3.0T
.39″
2.60″” 2.36″” 3.54″
5″” X 7.10″” 5.60″” 6″ X 8.58″
87 70Hz-20kHz 40 160 87 70Hz-20kHz 40 160 89 50Hz-20kHz 50 200
4
JENSEN·
Limited Two Year* Warranty
This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Jensen warrants this product to the original purchaser to be free from defects in material and workmanship for a period of two years from the date of the original purchase. Jensen agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed, or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period. What is covered? This warranty covers all defects in the material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair, or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.jensenmobile.com. Warranty Coverage * Limited 2-year warranty. (Proof of purchase required) Extend your warranty from 2 years to 3 years when you register online at www.jensenmobile. com
What to do? 1. Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call. 2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center. 3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment. 4. For more information and for the location of the nearest authorized service center please contact us by one of the following methods: · Call us toll-free at 888-921-4088 (Monday-Friday, 9:00 am, to 5:00 pm, EST) · E-mail us at cs@jensenmobile.com Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental, or consequential damages.
5
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>