BINNUNE BW03 USB Wireless Card Installation Guide

BINNUNE BW03 USB Wireless Card

Product Specifications:

• Model: QSMDOT-202
• Operating System Compatibility: Windows 10/11, Mac OS, Linux
• Connection: USB
• Network Connectivity: Wireless
• Certification: FCC Part 15

Product Usage Instructions

• Hardware Installation:
  Connect the USB port of the device to your computer using a USB extension base (sold separately).

• Driver Installation:
  Open the program and follow the instructions to install the driver provided.

• Network Connection Settings:
  Click on the desired wireless network and enter the password to establish a connection.

• Network Connection Status:
  You can check the status of your network connection after successfully connecting to a wireless network.

FAQ:

• Q: What should I do if the device is not connecting to my computer?
  A: Make sure the driver is properly installed and try reconnecting the device. If issues persist, contact customer support.

• Q: Can I use this device with a Mac computer?
  A: Yes, this device is compatible with Mac OS. Follow the same installation steps as for Windows computers.

• Q: Is it necessary to use a USB extension base for connection?
  A: It is recommended when connecting to a desktop computer to ensure proper power supply and connectivity.

Quick Installation Guide

1. Hardware installation
   There are two ways to install the network card ;
   Note: The picture is a simplified schematic diagram, please refer to the actual product for details.

2. Insert the network card directly into the USB port of the computer;

3. Connect the computer USB port through the USB extension cord base (USB extension base needs to be purchased separately);
   Note: When using a desktop computer, ii is recommended to use a USB extension cord base to connect to the port on the back of the computer case (some desktop ports have insufficient power supply or cannot be used), and extend it to the Desktop computer USB ports.

4. Driver Installation

5. The software installation process under each Windows 10/11 system is similar, The following installation takes Windows 1 O system as an example. insert the network card into the USB port , and choose to run “WifiAutolnstallSetup.exe” in my computer.

6. Open the program and follow the prompts to install the driver.

7. After the installation is complete, it is recommended to restart the computer. If there is work in progress or documents being written, you can restart it later, If there is nothing else, it is recommended to restart immediately.

8. Network connection settings

9. After confirming that the driver is installed correctly, you can double-click the wireless network card icon in the lower right corner.and click the icon with the left mouse button. The computer will display the connectable wireless

10.  Click the wireless network you want to connect to and enter the password to connect.

11. Network connection status

12.  After the network is connected, the computer system icon will change to  , and then you can right-click the icon and select “Open “Network and Internet” settings” to enter the setting selection interface.

Warning Statement

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>