BINNUNE BW02 2.4G Wireless Gaming Headset User Manual
- June 6, 2024
- BINNUNE
Table of Contents
BINNIE WIRELESS GAMING HEADSET
MODEL: BWW02
Info and Table of contents
PACKAGE CONTENTS
BINNUNE BWO2 Wireless Gaming Headset 2.4G Wireless Transmitter
User Manual 3.5mm Audio Cable USB Type-c Charging Cable
ENGINE REQUIREMENTS
Platforms:
Windows 7 – Windows 10
Mac OS X 10.8 – 10.11
See page 12 for details
Product overview
01 Retractable Headband
02 Soft Memory Protein Ear Cushions
03 Unidirectional Microphone
04 Mic Mute Button
05 2.4G Wireless Transmitter
06 3.5mm Audio Cable| 07 USB Type-c Charging Cable
08 Master Volume Wheel
09 Power Button
10 3.5mm Audio Port
11 USB Type-c Charging port
---|---
Setup
-
Using with PC/Mac in Wireless Mode
1. Open Sound settings
3. Choose your input device `BWO2′
2. Choose your output device BWO2
4. BW02 wireless headset can be used. -
Using with PS4/PS5 Controller in Wired Mode
Using with PS4/Ps5 Console in Wireless Mode
Route: Settings > Devices Audio
Devices Set ‘BW02. as Input Device & Output Device
-
Using with Xbox Controller in Wired Mode
Note: Wireless mode is not available for Xbox. Specifications
Model……………………………………………………………………………………………………. BWO2
Headset battery capacity………………………….. lithium battery 3.7V/1500mA
Working time………………………………………….. about 17 hours(70%volume)
Charging time…………………………………………………………….. about 4 hours
Standby time………………………………………………………….. about 200 hours
Input charging standard……………………………………………….. USB Type-C, DC5V/1A
Frequency response……………………………………………………. 20Hz – 20KHz
Sensitivity………………………………………………………………. 100+3dB@1KHz
MIC sensitivity…………………………………………….. -38±3dB@1 KHz(Unidirectional)
Wireless Range…………………………………………………………………………. Up to 32 feet
Power ON/OFF
MIC ON/OFF
On: Microphone On
Off: Microphone Off
Note: On the wired mode, the microphone mute function does not work.
Headset Charging
Note
- If your headset is disconnected from your devices and no operation is performed for five minutes, your headset will turn off automatically.
- Insert the 3.5mm audio cable, then the headset turns off and enters the wired mode.
- Low Battery Reminder: When you hear the low battery tone ‘battery low’ and the red light flashes, please charge the headset in time.
Troubleshooting
2.4GHz wireless
The 2.4GHzconnection is available on Windows / Mac / PS4 /PS5.
Charging and Working Time
- Please charge the headset with 5V/1A standard adapter or via the USB port of the PC;
- Generally, it takes 4 hours to fully charge the headset, but. actual the charging time may vary according to different charging devices;
- Up to17 hours of working time (at 70% volume) after fully charged.
The Microphone can not Work
The wireless mode:
- Check whether you’ve set the headset as the default recording device;
- Check if the microphone has been turned off.
Wired mode:
- Make sure the line-in cable has been connected tightly;
- please use a converter cable while connecting with the PC.
No Sound or Intermittent Sound from the Headset
- Check if there are other obstacles that affect the transmitter;
- 1f intermittent sound occurs when you are communicating, check whether the network of your device works smoothly;
- Check whether you’ve set the headset as the default recording device;
- Check whether the headset is in the lowest volume setting.
Can’t Connect to Devices
- Check whether you used a USB Extension Cable or USB Hub It is not recommended.
- Aug directly into the USB jack of the device’s host.
- Try to Replace a USB jack. (Some USB jacks may be power shortage)
- For PC, it is recommended to plug into the USB jack at the back of the host.
We can’t meet all our customer’s expectations, but we try to meet it.
www.binnunetech.com
support@binnune.com
Support
