BINNUNE BW06-BT Wireless Gaming Headset User Guide
- June 15, 2024
- BINNUNE
Table of Contents
BINNUNE WIRELESS
GAMING HEADSET
MODEL: BW06-BT
Package Contents
Overview
A. Headset
B. Microphone
C. Mic mute button
D. Volume wheel
E. Power button
F. USB type C charge port
G. USB type C charge cable
H. USB Wireless adapter
System Requirements
Windows7/ 8/10/11
Mac OS 10.8-10.11
PlayStation 4
PlayStation 5
Setup
2.4G Wireless Setup
Using with PC/Mac in 2.4G Wireless Mode
- Connect the wireless adapter to a USB port on your PC/Mac. The wireless adapter status light will blink Blue, indicating it is waiting for connection.
- Press and hold the power button of the earphone for 2 seconds to turn on the power
- When the wireless adapter status light is blue and the prompt “USB connected” is displayed, it indicates that the earphones are connected (the earphone earmuff LED is white for 10s and on for 1s).
Headset Windows Configuration
Go: Settings>System>Sound>Output, choose your output device, please choose
“BW06-BT ” Input,choose your input device, please choose “BW06-BT”
Headset Mac OS Configuration
Go to System Preferences > Sound>Under “Output” select “BW06-8T~ >Under
“Input” select “BWO6-BT” ;
Headset Connection and Configuration (PS4™ & PSS™ }
- Turn on your PS4™ game console .
- Connect the wireless adapter to a USG port on your PS4™/PS5™. The wireless adapter status light wilt Blink blue, indicating it is waiting for connection.
- Press the power button on the headset to power on, press the US8/ Bluetooth switch button to choose “USB mode” .
- When the wireless adapter status light is blue and the prompt “USB connected” Is displayed, it indicates that the headphones are connected (the earpiece LED is white for 10s and on for 1s).
- Navigate to the Settings Menu and select it.
- Highlight the “Devices” menu option and select it
- Scrolldownto “Audio Devices” and select it.
- Set “Input Device” to BWO6-BT Wireless Headset.
- Set “Output Device” to BWO6-BT Wireless Headset.
- Choose “Outputto Headphones” and select “All Audio” .
Bluetooth Setup
- Press the power button on the headset to power on.
- Double click the power button to switch to “Bluetooth mode”, hear a prompt tone, and the earmuff LED flashes red and blue.
- Enable Bluetooth on your mobile device, then find and select the BW06-8T from the list of found devices on yaur device’ s Bluetooth page.
- After pairing, you will hear a prompt, and the blue tight of the earmuff LEO will cycle off for 10 seconds, turn on for 1 second, and then turn off.
NOTE: The headset can be connected with two devices(one in USB mode and
other in Bluetooth mode) simultaneously under Bluetooth/US8 mode.
You can press the power button to answer incoming call on your headset.
Headset Charging
It is recommended to fully charge the headset before initial use.
After the charging line is connected, the ear cup LED turns on red, and tums
on blue when fully charged.
Please charge your headset with SV 300mA power adapter or via the USB port of
your PC.
LED Indicator
Ear Cup LED Indicator on Headset
| Altematively flash red and bive | Headphones not |
|---|---|
| White/blue fight, 10s on for 1s | connected |
LED Indicator on USS Adapter
| Blink Blue | Waiting for connection |
|---|---|
| Solid Blue | connection |
Specifications
Model …………………………………………………. BW06 – BT
Headset battery capacity……………………. lithium battery 3.7V/500mA
2.46 Mode Working time ……………………..about 48 hours(70% volume}
BT mode working time…………………………..about 63 hours(70%volume}
Charging time…………………………………………… about2-3 hours
Standby time…………………………………………about 200 houurs
Input charging standard…………………………..USB Type-C,DC5V/300mA
Frequency response,………………………………20Hz-20Khz
Sensitivty……………………………………….. 90±3dB@1kHz
MIC sensitivity…………………………… -38±3dB@1kHz
Wireless Range…………………………………Up to 32 feet
Support
FCC Caution:
This device complies with part 15 of the FOC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. ‘This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. |
lowever, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
‘The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.