BLUESOUND NODE NANO Wireless Music Streamer Owner’s Manual
- September 24, 2024
- BLUESOUND
Table of Contents
BLUESOUND NODE NANO Wireless Music Streamer
Specifications :
- Product: NODE NANO
- Type: Wireless Music Streamer
- Model: N030
Product Information
Welcome to Bluesound and thank you for purchasing your NODE NANO. This high- performance wireless music streamer is designed to deliver exceptional audio quality and functionality for your listening pleasure. The NODE NANO focuses on core HiFi streaming features, ensuring a premium audio experience.
Product Usage Instructions
-
Setup:
-
Connect the NODE NANO to a power source using the USB Power Adapter and USB-C Power Cable.
-
Use the Ethernet Cable to connect the LAN PORT if a wired connection is preferred, otherwise, connect to a Wi-Fi network.
-
Connect the NODE NANO to your audio system using the appropriate cables (Stereo RCA Connector, COAX OUT, OPTICAL OUT, or TRIGGER OUT).
-
Presets:
The NODE NANO features 2 programmable preset buttons that can be configured via the Presets menu in the BluOS App. -
Volume Control:
Adjust the volume level using the – and + buttons on the NODE NANO. Each press changes the volume by 1dB intervals. -
Audio Output:
Connect the NODE NANO to an amplifier, receiver, stereo system, or active speakers using the AUDIO OUT to utilize the internal DAC for audio output. -
Digital Outputs:
- COAX OUT: Use a coax cable to connect to compatible devices and bypass the internal DAC.
- OPTICAL OUT: Connect via a digital optical cable to bypass the internal DAC.
-
USB Input:
Connect USB mass storage devices to the TYPE A USB input for playback. Ensure the devices are FAT32 formatted for compatibility. -
Trigger Out:
Use the TRIGGER OUT for a 12V DC signal to control external devices with corresponding 12V trigger inputs using a 3.5mm mono audio cable.\
FAQ :
-
Q: How do I set up the NODE NANO presets?
A: You can configure the presets by accessing the Presets menu in the BluOS App and assigning desired functions to the programmable buttons. -
Q: Can I use both Wi-Fi and Ethernet connections with the NODE NANO simultaneously?
A: Yes, you can use either a wired Ethernet connection or a Wi-Fi connection based on your preference for network connectivity. -
Q: What type of USB mass storage devices are compatible with the NODE NANO?
A: Typical compatible devices include portable flash memory devices and external hard drives formatted in FAT32.
NODE NANO
WIRELESS MUSIC STREAMER
OWNER’S MANUAL
Welcome to Bluesound
Thank you for purchasing your NODE NANO. The NODE NANO is designed with a
truly high-performance mindset, focusing on the absolute core functionality of
a HiFi streamer.
BluOS
The BluOS multi-room music streaming platform, the world’s leading ecosystem
for hi-res streaming audio, is the backbone of Bluesound product performance.
The NODE NANO has music services built right in, so listening to your favorite
artist or playlist is simple. Connect the NODE NANO to any audio system by
using its class-leading analog RCA output or pass the digital signals along
with Coax, Optical or USB. Using the BluOS Controller App, group your NODE
NANO with other Bluesound players for
a whole home listening experience, or simply let it do all the work itself to
add hi-res streaming to your stereo. Either way, it’s easier than ever to
enjoy the pleasures of hi-res listening – on any existing amplifier or powered
speakers– with the NODE NANO.
This Owner’s Manual will provide you with a more detailed overview of your
NODE NANO and its features. It also includes some troubleshooting tips and
tricks and networking best practices. The Quick Setup Guide included with your
NODE NANO will help you get it on the network and ready to listen to your
music.
Included Accessories
-
PRESETS The NODE NANO has 2 programmable preset buttons. These are configured using the Presets menu in the BluOS App.
-
STATUS INDICATOR Below is a table of the LED blink codes and their corresponding descriptions.
-
PLAY/PAUSE BUTTON This button has multiple functions – a visual indicator of network connectivity and a PLAY/PAUSE button. For a full listing of LED Blink Codes, please see #2 – Status Indicator. For an ungrouped Player, press the button to Play or Pause the stream. If listening to an internet radio stream, the Pause- function will work for 30 seconds. At this point, the buffer is full and the stream will Stop. When a Player is grouped, pressing the PLAY/PAUSE button will Mute the Player while other Players continue the stream. The Player’s LED will flash blue when muted. This button is also used for Factory Reset functions. See steps for Factory Reset later in the manual.
-
IR RECEIVER The IR receiver is hidden behind the glass.
-
VOLUME Use the “-“ and “+” buttons to adjust the volume level. Tapping the buttons will adjust the level by 1dB intervals.
-
AUDIO OUT Connect to the corresponding analog audio input of an amplifier, receiver, stereo system or active speakers. Connecting via the AUDIO OUT will use the NODE NANO’s internal DAC.
-
COAX OUT Using a coax cable (not provided), connect one end to the COAX OUT of the NODE NANO and the other end to the corresponding coax input of a compatible devices such as receivers, digital-to-analog converters or other digital processors. Connecting via the COAX OUT will bypass the NODE NANO’S internal DAC.
-
OPTICAL OUT Using a digital optical cable (not provided), connect one end to the OPTICAL OUT of the NODE NANO and the other end to the corresponding coax input of a compatible devices such as receivers, digital-to-analog converters or other digital processors. Connecting via the OPTICAL OUT will bypass the NODE NANO’S internal DAC.
-
LAN PORT The LAN PORT connection can be used with the Ethernet cable provided. This is an optional connection since the NODE NANO can be connected to the network through a Wi-Fi connection to your router. To setup the NODE NANO using the LAN Port a Wired Ethernet connection is required. Connect one end of the Ethernet cable to the LAN port of your wired Ethernet Broadband router and the other end to the NODE NANO’s LAN port.
USB INPUT (TYPE A) Connect a USB mass storage device to the USB input. Typical USB mass storage devices compatible with the NODE NANO include portable flash memory devices and external hard drives (FAT32 formatted). [Read about Server Mode in Settings] -
USB OUTPUT (TYPE A) The NODE NANO can transfer digital audio (USB Audio 2.0) through to an external DAC via the USB Type-A slot. Using a USB cable (not provided), connect one end to the
-
USB output of the NODE NANO and the other end to the corresponding USB input on a separate DAC device. Select your USB DAC from the NODE NANO’s Audio settings page in the BluOS App to bypass the NODE NANO’s internal DAC via USB audio out. Note: When USB Output is selected, all other outputs (Analog and Digital) are dormant.
-
TRIGGER OUT A 12V DC signal is available using the TRIGGER OUT. The 12V DC signal can be used to control or activate other external devices equipped with a corresponding 12V trigger input using a 3.5mm mono audio cable.
-
IR IN An infrared extender can be connected to allow for programmable learning remotes to control volume and source selection when a NODE NANO is stored in a way that the front panel IR sensor is not visible.
-
POWER Use the supplied USB-C cable and USB Power Adapter to power ON the NODE NANO.
NETWORK
- The NODE NANO is a network audio player and relies on a well-implemented local area network to operate correctly. Internet access is required for software updates and to use many of the player’s features, like cloud-based music streaming.
- Visit the Bluesound Knowledge Base for more help, tips, and tricks to improve network setup. https://support.bluos.net/hc/en-us/sections/360000042348-Networking-101
- Once the NODE NANO is connected to your equipment and AC power, you need to add it to your network. Watch for the front panel LED to turn Solid Green, indicating it is ready for network connection in ‘Hotspot’ mode. You can add your player to the network via wired Ethernet, or wirelessly via Wi-Fi. If using Ethernet, simply plug in an Ethernet cable to the NODE NANO’s LAN Port.
- The LED will turn Solid Blue, indicating network connection. If using Wi-Fi, open the BluOS App on a phone or tablet, and use the ‘Add A Player’ wizard to guide you through the steps. Whether connecting via Ethernet or Wi-Fi, you must finalize setup by initializing your NODE NANO within the BluOS App.
MOUNTING
- On the bottom panel of the NODE NANO there is a rubber cover hiding two keyhole slots. Simply remove the cover to reveal these slots. Use the cover as a guide for screw placement, by flipping it over and affixing it against the wall. Mounting screws are not included.
PRESETS
- You can set presets for your favorite radio stations, music streams or playlists using the BluOS Controller app. Presets can be recalled from the two preset buttons on the NODE NANO or from an IR
- Remote, including the Bluesound RC1 remote (sold separately).
- Visit the Bluesound Knowledge Base for more help, tips, and tricks.
- How to add or delete a Preset? – The BluOS Support Crew
Audio Settings
TONE CONTROL : Enable to adjust your Player’s Treble and Bass output
levels.
Note: When enabled, the total volume of your Player is reduced by 6dB to allow
adjustment of the bass and treble outputs from -6dB to 6dB. Tone Control is
disabled and not displayed when MQA external DAC is enabled.
REPLAY GAIN : Select any of the following to configure consistent volume
levels between tracks in the play queue:
- Track gain – To use the track gain value from the song’s metadata to have the current track’s volume be more consistent with other tracks.
- Album gain – To use the album gain value from the metadata to provide a consistent volume level between all audio tracks on a particular album.
- Smart gain – To allow the BluOS to automatically choose between track gain and album gain values to provide the best replay gain option for your current listening.
Note: BluOS uses the metadata of the selected audio track to configure consistent volume levels between tracks. OUTPUT MODE: Select any of the following to configure the channel output on the BluOS Player:
- Left/Right – Outputs only the Left or Right audio channel.
- Mono – Outputs single-channel audio out.
- Stereo – Outputs both Left and Right audio channels.
MQA EXTERNAL DAC : Enable this option when you require an MQA-certified
external DAC to handle MQA unfolding rather than the BluOS Player.
Note : To enable MQA external DAC, you should enable the Output level
fixed and disable – Tone Controls and Replay Gain. Learn more.
OUTPUT LEVEL FIXED: Enable to set and fix the volume of the BluOS Player at
the maximum level. This allows you to control volume using the external device
connected to the BluOS Player instead of the BluOS Controller App.
AUDIO CLOCK TRIM: Enable to reduce jitter and increase audio clock timing
precision when using an external DAC.
Note : Not all DACs can handle this. If audible clippings or dropouts
occur, disable Audio Clock Trim to avoid BluOS’s accuracy setting from
interfering with the external DAC’s firmware.
Settings
IR REMOTE: Setup an IR Remote, either by teaching your Bluesound Player to work with one of your old remotes or by using the Bluesound RC1 remote which works out-of-box.
- BluOS Remote: Enable/Disable the Bluesound RC1 Remote if you have multiple Bluesound Players in the same room, and only want the remote to control one of them. If you have multiple remotes, you can change the IR Channel for each Player. Learn more
- IR Learning: Program your own remote to work with your Bluesound Player. Learn more
Indicator Light: Adjust the brightness of the light on your Bluesound Player
- Normal – Default brightness
- Dim – Lower the brightness
- Off – Turns off the light
BLUETOOTH: Settings for Bluetooth visibility and functionality.
- Manual – This mode allows you to manually switch between Bluetooth as a local source in the Inputs section of the Music Tab.
- Automatic – (Default mode) This mode automatically switches to the Bluetooth source when a Bluetooth-connected device starts playing audio.
- Guest – This mode switches the Bluesound player to the Bluetooth source when your connected Bluetooth device starts playing audio. However, switching sources disconnects the Bluetooth connection. The Bluetooth source is not displayed under the Inputs section of the Music tab. This configuration is ideal for streaming audio from multiple Bluetooth-enabled devices.
- Disabled – This mode turns off the Bluetooth receiver on the player.
SERVER MODE: To make your USB library accessible in the BluOS Controller app, plug the USB drive (in NTFS or FAT32 file format) into the USB port at the back of the BluOS Player and follow the onscreen prompts on the BluOS Controller app.
- [Yes] Server Mode enabled – USB drive is shared with other players on the network from the local Library.
- [No] Server Mode disabled – USB drive access is restricted to the USB-connected Player.
Note: After the connection, the player’s Status Indicator LED turns white,
indicating that it is indexing the connected library. Depending on the size of
your music library, the indexing process may take some time to complete. The
indexing process is complete when the Status Indicator LED returns to solid
Blue.
Visit the Bluesound Knowledge Base for more help, tips, and tricks.
USB Server Mode – How to connect external USB Library to the BluOS Players? –
The BluOS Support Crew
WARNING!
THIS IS A FACTORY RESET OF YOUR PLAYER. ALL CUSTOMIZATION INCLUDING WI-FI NETWORK CONFIGURATION, FILE SHARES AND SAVED PLAYLISTS WILL BE LOST. YOU WILL HAVE TO RE-CREATE THESE ONCE COMPLETE. THIS PROCESS IS ONLY RECOMMENDED IF YOUR PLAYER IS NOT FUNCTIONING AND AN INTERNET FIRMWARE UPGRADE HAS FAILED. FOR ANY QUESTIONS OR CONCERNS CONTACT AN AUTHORISED BLUESOUND CUSTOMER REPRESENTATIVE BEFORE PROCEEDING!
Steps to Factory Reset:
- Disconnect the NODE NANO from electrical power.
- Wait 30 seconds.
- Reconnect the power.
- Once the LED turns Red, press and hold the PLAY/PAUSE button. The LED will immediately turn Green and then back to Red – continue to hold the button for 30 seconds.
- After 30 seconds, the LED will begin to blink red – then release the button.
- All customization to the NODE NANO will be removed and restored to factory settings.
IMPORTANT Removing your finger from the PLAY/PAUSE button at any time before the LED begins flashing red will cancel the factory reset and leave the NODE NANO in Upgrade Mode. Just start the steps again to factory reset it.
You will know the factory reset is successful if the NODE NANO returns to Hotspot mode (wireless connection – the LED will turn solid green). If it is connected to your network through a wired Ethernet connection, it will simply connect as if it was a new player (LED will turn solid blue).
© Bluesound International. Bluesound, the stylized wordmark “B” logotype, the phrase “HiFi for a wireless generation”, NODE NANO and all other Bluesound product names and taglines are trademarks or registered trademarks of Bluesound International, a division of Lenbrook Industries Limited. All other logos and services are trademarks or service marks of their respective owners. 8
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>