CASA FIXTURES C4-33TST Quartz Kitchen Sink Installation Guide

CASA FIXTURES C4-33TST Quartz Kitchen Sink

Specifications:

• Model Numbers: C4-25TST, C4-33TDT, C4-33TST
• Material : Quartz
• Recommended Use: Indoor kitchen use only
• Warranty : Void if installation guide is not followed

Product Usage Instructions

Important:

1. Read the instructions carefully before installation.
2. Inspect the sink for any damage before installation.
3. Follow all local plumbing and building codes.
4. Keep the receipt for warranty purposes.
5. Do not install the sink outdoors.

Tools you may need:

• Drill
• Jig Saw
• Tape Measure
• Pencil
• Safety Glasses
• Level
• Silicone
• Silicone/Caulk Gun

Installation Options:
Ensure adequate clearance behind the sink for faucets and backsplash. Use safety gear when working.

Undermounted Installation:

1. Step 1: Position Template
   Unpack the sink and check the contents. Determine installation type, cut out template, and ensure suitable clearance.

2. Step 2: Trace Template and Cut
   Countertop
   Trace the template on the countertop cut the opening carefully. Use the appropriate saw for the material.

3. Step 3: Sink Installation
   Apply silicone sealant along the sink rim. Do not use epoxy.

4. Step 4: Sink Installation
   Insert sink into the opening, align with cutout, and press firmly. Handle with care to avoid injury or damage.

5. Step 5: Countertop Installation
   Apply silicone sealant between the sink flange and countertop for a watertight seal. Check for levelness and correct drainage.

Thanks for choosing our products. You have chosen one of our impeccable Fireclay sinks, and we are excited to get you started on installing it.

READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUCT

Important

1. Read the instruction carefully before installation. Inspect the sink prior to installation to make sure that is not been damaged during shipping.
2. The instructions are for installation with solid surface and composite material countertops. We recommends professional stone fabricator to perform the installation and is not responsible for damage to countertop or sink during installation.
3. Template are only provided as a guide. Place template on sink to ensure the template will give you the proper cutout for the sink.
4. Observe all local plumbing and building codes.
5. Keep this booklet and the receipt (or other proof of date and place of purchase) for this product in a safe place. The receipt is necessary to request warranty parts.
6. We does not accept any liability for damage to countertop, sink fixture, faucets or personal injury during installation. Warranty is void if installation guide is not followed.

Please keep the box and packaging materials until your product is completely installed.

NOTE : These sinks are intended for indoor kitchen use only. They are not rated for outdoor use. Installation of this sink in an outdoor setting will void any warranty on this product.

Tools you may need

Installation Options

Caution : When determining sink placement, be sure to check that there is adequate clearance behind the sink for any faucet(s) and your backsplash, as well as clearance for a full range of motion for faucet spouts and handles.

Undermounted installation

1. **Step 1: Position Template

Unpack the new sink and check the contents of the materials supplied:** Sink, Mounting brackets, and Cutout template (depending on model). Contact your retailer if any product is damaged or missing prior to installation. Never install a damaged sink as it can void your warranty. Determine the installation type you prefer, cut out the appropriate template for your sink model. Make sure clearance is suitable for backsplash, faucet, and plumbing for the sink.

2. Step 2: Trace Template and Cut the Countertop
   • Trace template on countertop with a pencil.
   • Cut the opening in the countertop by carefully following the traced line.
   • NOTE: Please use the appropriate saw that best fits your countertop material.
3. Step 3: Sink installation Turn the sink over and apply a generous bead of silicone sealant along the bottom of the sink rim. Do not use epoxy.
4. Step 4: Sink installation
   • Insert the sink into the opening, check the alignment of the sink to the cutout in the countertop and press firmly.
   • Warning! To be avoid of risk of personal injury or product damage, Handle with care. The product can break, chip, cause injury or product damage.
5. Step 5: Countertop Installation After cleaning, apply a bead of silicone sealant between the top flange (or lip) of the sink and the countertop to create a watertight seal. Clean excess silicone immediately. Verify the overall appearance and check for levelness to ensure correct drainage. Carefully place the countertop and verify that it is level.
6. Step 6: Connect water supply and drainage system per manufacturer’s instructions. Run water to test for leakage

Products Care and Maintenance

Clean your sink on a regular basis with warm soapy water. Rinse the sink after using cleaning products. Wipe the sink surface with a soft cloth to remove any liquid residue. Do not cut food directly on the surface of the sink. Do not leave sharp objects on the surface of the sink for an extended period of time. Do not use abrasive cleaning products, sanding tools, steel wool, or bleaching products

Limited Lifetime Warranty

This product has been manufactured and inspected to the highest possible quality standards. Our sinks carry a limited lifetime warranty for residential use. Should you experience any defects in materials or workmanship within the warranty period, we will repair or replace the defective product, subject to the following conditions:

• Any claim made under this warranty must include a copy of a valid proof of purchase showing the date and place of purchase.
• Our obligation under this warranty is to the original purchaser only, and may not be transferred.
• Product replacement does not include shipping costs or labor installation costs.
• This warranty applies to residential installations only.
• We reserves the right to examine product in question and its installation prior to replacement.
• If an identical replacement product is not available, We reserves the right to replace the defective product with a similar product.

NOTE : Accessories such as rinse grids, cutting boards, strainers are not covered by this warranty.

This warranty relates to defects in manufacture, materials or workmanship in a stainless steel kitchen sink supplied for installation into domestic premises in the United States. It does not extend to :

• Damage resulting from failure to maintain the product in accordance with the Care and Maintenance instructions in this manual.
• Normal wear and tear, scratches or accidental damage.
• Faults arising from improper use and/or installation.
• Defects in accessories, strainers and rinse grids.

All incidental or consequential damages are specifically excluded. No additional warranties, express or implied are given, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

FAQ

Q: Can I install the sink outdoors?
A: No, the sink is intended for indoor kitchen use only. Installing it outdoors will void the warranty.

Q: What should I do if the sink is damaged during shipping?
A: Contact your retailer immediately if any product is damaged or missing prior to installation. Do not install a damaged sink to avoid voiding the warranty.

Q: What type of sealant should I use during installation?
A: Use a generous bead of silicone sealant along the bottom of the sink rim. Do not use epoxy for installation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>