ViewSonic X100-4k UHD DLP Beamer User Guide

: September 23, 2024
: Viewsonic

Table of Contents

ViewSonic X100-4k UHD DLP Beamer
WHAT’S IN THE BOX
SETUP
CONNECTION TO OTHER DEVICES
DIMENSION
Product Usage Instructions
Important Safety Instructions
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ViewSonic X100-4k UHD DLP Beamer

Specifications:

Power Input: 100-240 Vac 50/60 Hz
Connectivity : HDMI, USB, LAN, RS232, S/PDIF, Audio Out, Control
Power Cord: 5V/2A
Projection Sizes : 40″ to 200″
Projection Distance : Varies based on screen size

WHAT’S IN THE BOX

SETUP

CONNECTION TO OTHER DEVICES

DIMENSION

Screws : M6 x 8 (Max. L = 8 mm)
Unit : mm

16:9 image on a 16:9 screen

(a) Screen Size

| 16:9 image on a 16:9 Screen
---|---
(b) Projection distance| (c) Image height| (d) Vertical offset
min. max.| min. max.
inch| cm| inch| cm| inch| cm| inch| cm| inch| cm| inch| cm
40| 101.6| 41.84| 106.3| 50.20| 127.5| 19.61| 49.8| 0| 0.0| 12.75| 32.4
60| 152.4| 62.75| 159.4| 75.30| 191.3| 29.42| 74.7| 0| 0.0| 19.12| 48.6
70| 177.8| 73.21| 186.0| 87.85| 223.2| 34.32| 87.2| 0| 0.0| 22.31| 56.7
80| 203.2| 83.67| 212.5| 100.41| 255.0| 39.22| 99.6| 0| 0.0| 25.49| 64.8
90| 228.6| 94.13| 239.1| 113.0| 286.9| 44.12| 112.1| 0| 0.0| 28.68| 72.8
100| 254.0| 104.59| 265.7| 125.51| 318.8| 49.03| 124.5| 0| 0.0| 31.87| 80.9
120| 304.8| 125.51| 318.8| 150.61| 382.5| 58.83| 149.4| 0| 0.0| 38.24| 97.1
150| 381.0| 156.88| 398.5| 188.26| 478.2| 73.54| 186.8| 0| 0.0| 47.80| 121.4
200| 508.0| 209.18| 531.3| 251.01| 637.6| 98.05| 249.1| 0| 0.0| 63.73| 161.9

All measurements are approximate and may vary from the actual sizes. It is recommended that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make allowance for this projector’s optical characteristics. This will help you determine the exact mounting position so that it best suits your installation location.

Product Usage Instructions

Important Safety Instructions:

Read and keep these instructions.
Heed all warnings and follow all instructions.
Do not use near water or block ventilation openings.
Clean with a soft, dry cloth; do not install near heat sources.
Protect the power cord from damage.

Projection Setup:
To set up the projector for optimal projection size and distance:

Determine the screen size based on the table provided.
Calculate the projection distance based on the desired screen size.
Adjust the projector’s position to achieve the desired image height and vertical offset.

FCC Compliance:
This device complies with FCC Rules and must not cause harmful interference. It should accept any received interference.

Important Safety Instructions

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this unit near water.
Clean with a soft, dry cloth.
Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs. Convenience receptacles and the point where they exit from the unit. Be sure that the power outlet is located near the unit so that it is easily accessible.
Only use attachments and accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the unit. When a cart is used, use caution when moving the cart unit combination to avoid injury from tipping over.
Unplug this unit when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate normally or has been dropped.

FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation. Industry Canada ICES-003 Compliance: CAN ICES-3 (B)/NMB-3(B)

CE Conformity for European Countries
The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU. and Radio Equipment Directive 2014/53/EU. The full Declaration of Conformity can be found at the following website: https://www.viewsonicglobal.com/public/products_download/safety_compliance/projector/X100-4K_CE_DOC.pdf

Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC).

+49-0821-45057383

FAQ

Q: How do I clean the projector?
A: Use a soft, dry cloth to gently clean the projector. Do not use liquid cleaners.

Q: Can I install the projector near heat sources?
A: It is not recommended to install the projector near heat sources such as radiators or stoves.