‎Pokitter ‎Orca Mini Orca Mini Portable Projector Operational Manual

June 3, 2024
Pokitter ‎

‎Pokitter ‎Orca Mini Orca Mini Portable Projector

Pokitter-‎Orca-Mini-PORTABLE-PROJECTOR

Introduction

Please read through this manual in detail before using, thanks for ordering our company’s product, please read this manual thoroughly before using for the sake of your safety and interests. We assumes no responsibility for any personal injury, loss of property or others that caused by inappropriate operation if you don’t follow the instructions stated hereof.

Important Safety Precautions

The following safety instructions will ensure long service life of the machine, and avoid any fire or electric shock. Please ensure to read carefully and pay high attention on all the following warnings

  • Don’t install in places with poor ventilationPokitter-‎Orca-Mini-PORTABLE-PROJECTOR-FIG- \(1\)
  • Don’t install in places that hot and humidPokitter-‎Orca-Mini-PORTABLE-PROJECTOR-FIG- \(7\)
  • Don’t block the vent (Inlet or Outlet)Pokitter-‎Orca-Mini-PORTABLE-PROJECTOR-FIG- \(2\)
  • Don’t install in dusty and smoky areasPokitter-‎Orca-Mini-PORTABLE-PROJECTOR-FIG- \(3\)
  • Don’t install close to any temperature or smoking sensors (May cause sensors failures)Pokitter-‎Orca-Mini-PORTABLE-PROJECTOR-FIG- \(4\)
  • Don’t install in areas that directly blown by cold and warm wind of air conditioner (Otherwise, it may cause failure due to vapor condensation or rise of temperature)

Pokitter-‎Orca-Mini-PORTABLE-PROJECTOR-FIG- \(5\)

Pay Attention to Heat Dissipation

Pokitter-‎Orca-Mini-PORTABLE-PROJECTOR-FIG- \(1\)

Please leave at least 30cm between projectors and objects around to maintain projectors’ performance and reliability

Attention

Please avoid watching lens directly so as to prevent our eyes from being hurt as projectors are with very high brightness

Packing List

Please check if any accessory is missing when opening; please contact your distributor if ii has any shortage

Pokitter-‎Orca-Mini-PORTABLE-PROJECTOR-FIG- \(2\)

Basic Parameters

Display Technology LCD Light Source Type LED Product Type Desktop
Size 220•1 ss•somm Keystone

Correction

| ±40 °| Focusing Method| Manual
Weight| 1236g| Throw Ratio| 1.35:1| Horn| 3W

**Product Brief**

Please check projector components and functions before using

Pokitter-‎Orca-Mini-PORTABLE-PROJECTOR-FIG- \(4\)Pokitter-‎Orca-Mini-PORTABLE-PROJECTOR-FIG-
\(6\)

Remote Control

Pokitter-‎Orca-Mini-PORTABLE-PROJECTOR-FIG- \(7\)

Projection size / Distance

Projection size (inch, no keystone correction)| Screen  length • width (m)| Lens – screen (m)
---|---|---
50| 0.67×1.11| 1.50
72| 0.98×1 .59| 2.00
84| 1.10×1.86| 2.50
100| 1.36×2.21| 2.84
120| 1.65×2.66| 3.50

Installation and Adjustment

Installation
You can place horizontal or via hanger installation.

Note: hanger is non-attached accessory!

Pokitter-‎Orca-Mini-PORTABLE-PROJECTOR-FIG- \(8\)

Adjust Focal Length

Diagram 1 and 2

Keystone Distortion

Blurred Distortion

Achieve satisfactory picture imaging effect via adjusting the keystone correction loop and focus wheel on the machine.

When keystone distortion occurs (as per diagram 1), it is recommended to adjust the keysone correction loop; when the image is blurred (as per diagram 2), it is recommended to adjust the focus wheel to improve picture clarity.

If satisfactory clarity cannot be achieved followed steps above, please move the product forward or backward as appropriate.

Shutdown Safely

  1. Press the button @ on the remote control to turn off the machine
  2. Press the button O on the back of machine body to turn off the machine.

Note: Please pull out the plug in lime to save energy once the machine is turned off.

Mobile phone screen/same screen

Connect with 10S Phone:

WAY1

  • Click Wi-Fi and find “WANBO X1-xxxxxx”, then input password “12345678” on your iPhone.
  • Click “Screen Mirroring “on your iPhone.

WAY2

  1. Click “OK” on the remote control, connect home Wi-Fi: Then connects the same Wi-Fi on your iPhone.
  2. Click “Screen Mirroring” on your iPhone.

Connect with Android:

  1. Click “Wireless Projection” on your phone.
  2. Select “WAN BO X1”, completes screen sharing.

Connect by Cables:

  1. Connect iPhone and projector through “USB” port with Phone USB cable.
  2. Click “Trust”.

Projection Setting Function details (Android)

Installation Mode

There are four installation modes (Front Projection, Rear Projection, Rear Projection Lifting, and Front Projection Lifting). Users can choose installation mode by pressing the left and right direction keys of the remote control, and install the projector as you like.

Keystone Correction

Keystone correction includes four-point keystone correction and vertical keystone correction. Users can choose four-point keystone correction or vertical keystone correction by pressing the confirmation key or left and right direction key on the remote-control under keystone correction option.

Under the four-point keystone correction option: select manual keystone correction, press confirmation key in the remote control to enter the manual keystone interface, then operate according to the screen prompts.

Under the Vertical Keystone Correction option: Screen option shows infinite zoom and manual keystone correction, infinite zoom can reduce or enlarged screen with an adjustment range between 80% and 100%. Manual Keystone Correction adjusts value through left and right direction keys of the remote control to ensure pictures to be the best.

WIFI Connection Description: Enter setting option, click Network Settings, open the WIFI setting switch, and select the network required. If no WIFI displayed, we can search and add WIFI manually.

Bluetooth Connection Description: Enter setting option, click Bluetooth setting, open the Bluetooth switch, choose Bluetooth device to match ( Note: Bluetooth can connect audio only but cannot connect mobile phone.

Clarity Adjustment: Adjust focus first and then adjust distance of placement if not clear.

Mobile Phone Projection / Same Screen (Android Version)

Firstly, make sure Projector and mobile phone under the same Wi-Fi, open Eshare of the projector, and then open video apps in your mobile phone (such as YouTube, Netflix), click IV icon in the upper right comer of the video to project).

iPhone uses Airplay mirror for same screen and projection; Android phone can project directly with Eshare, Android computer can download Eshare or use HDMI cable to complete projection.

Note: The above operations need to be done under the same WI-FI; all devices should connect to the same WIFI (wireless network).

System upgrades (Android Version)

Upgrade online

Online update through system upgrade

U disk upgrade (Local upgrade)

Copy the upgrade firmware to U disk root directory in FAT32 format, insert the U disk into the USB interface of projector, and then select U disk upgrade.

Mandatory upgrade

Copy the upgrade firmware to U disk root directory in FAT32 format. Insert the U disk into the USB interface under turn off condition of the projector, meanwhile, long press the device power button for 5 seconds to start automatic upgrade.

FAQ’s

Do projectors need maintenance?****

Little maintenance is required for your projector to continue operating at its peak level. To avoid the projector overheating because of obstructed ventilation, you might need to clean the lens from time to time in addition to the air filter and air vents.

Why is Wi-Fi required for a projector?****

These devices connect to an existing Wi-Fi network as opposed to a cabled projector. By doing this, you can omit the rapid wire connection while still giving your curved projection screen high-quality images. You can make your standard projector wireless, whether it’s a movie projector or a more portable device.

Without Wi-Fi, how can I stream Netflix to my projector?****

Using Your Android Device to Connect To stream Netflix from your mobile Android device to the projector, you’ll need a Type-C USB cable and Display Port functionality. Once you’ve downloaded the Netflix app to your smartphone, you’ll notice the required feature.

Why can’t my projector play movies?****

Verify the projector’s and computer’s connection. A VGA, DVI, or HDMI cable will normally be used for this connection. Make sure the cable is properly plugged in at both ends, and if feasible, try a different socket.

Can I use a projector to watch 3D movies?****

Yes! There are many projectors available on the market that supports 3D viewing, just like with flat-screen displays.

Do you require a projector screen?****

Yes! However, utilising a projector without a screen will result in a lower- quality image that may be seen. Although a plain white wall will undoubtedly make a wonderful surface for a projected image, there are certain drawbacks to consider.

What is DLP stand for?****

Digital Light Processing is referred to as DLP.  DLP projectors direct light through a lens, a colour wheel, and reflection mirrors.  The DLP chip, also known as the digital micromirror device (DMD), was created by Texas Instruments® and distinguishes DLP from LCD projectors.

Can Bluetooth be used with a projector?****

To output audio from a streaming device or other linked video source, you can link your projector to Bluetooth audio devices like speakers or headphones. Note: An A2DP-compatible Bluetooth audio device is required. The output of audio may lag a little bit.

What does a projector with Bluetooth do?****

The HDMI port or audio jack on your projector is where you connect Bluetooth adapters. They are then associated with more Bluetooth devices. They take in audio and visual information and send them to your projector. Additionally, the adapters allow your projector to broadcast audio signals to other Bluetooth devices.

Are there smart features on projectors?****

Everything a smart TV can do, smart projectors can too, but on a far larger screen. These projectors’ portability, lamp-free technology, voice control, app integration, and streaming capabilities set them apart. Many projectors advertise themselves as “smart projectors.”

Can a phone be used to link a projector?****

A USB-C video output port is present on almost all Android devices. The majority of projectors still use HDMI as their primary input connector, but with a straightforward converter like this one from Monoprice, you can use a regular cable to connect to your projector

What does a projector do?****

An optical device known as a projector or image projector projects an image (or moving pictures) onto a surface, most frequently a projection screen.

What kind of technology do projectors employ?****

Separate light and picture creation occurs in projectors. The light is produced by a light source and then directed at an image-making semiconductor. The three light sources used by contemporary projectors are LEDs, lasers, and UHP (ultra high pressure) lamps.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals