GIMBEL AUTOMATION 75mm Self Centering Air Vise Owner’s Manual
- September 21, 2024
- GIMBEL AUTOMATION
Table of Contents
GIMBEL AUTOMATION 75mm Self-Centering Air Vise
Product Specifications
Vise Actuation| Vise Type| Jaw Width| Part Size Range (Inner Clamp)| Part Size
Range (Outer Clamp)| Pressure Range| Repeatability| No Air Clamp Force| Clamp
Force at 140psi| Overall Dimensions (w/o Jaws)
---|---|---|---|---|---|---|---|---|---
Pneumatic Self-Centering| Pneumatic Self-Centering| 150mm| 6,675N| 26,000N|
0-140 psi| +/- 0.0008| 1,500lbf| 5,850lbf| 250mm x 215mm x 128mm
Product Usage Instructions
Installation
- Ensure the vise is securely mounted on the machine table.
- Connect the pneumatic hoses to the vise according to the machine specifications.
- Verify that all connections are tight before operating the vise.
Operating the Vise
- Apply the appropriate air pressure within the specified range (0-140 psi).
- Place the part to be clamped between the jaws.
- Activate the vise using the machine controls to securely hold the part.
- Ensure repeatability by checking the alignment of parts after multiple operations.
Maintenance
Regularly inspect the vise components for wear and tear. Clean and lubricate moving parts as needed to ensure smooth operation.
Frequently Asked Questions
- Q: Is the programmable air option necessary for all machines?
- A: The programmable air option is not required for all machines. It is only required for UMC machines.
- Q: What material are the vise components made of?
- A: The vise body is made of blued steel, vise slides are made of hardened steel, inner spacer is made of anodized aluminum, hard jaws are made of hardened steel, and soft jaws are made of 6061 aluminum.
SPECIFICATION/DATASHEET
150mm Air Vise Spec Sheet
Self-Centering Air Vise (150mm)
Spindle Gripper Specifications
| Imperial | Metric | |
|---|---|---|
| Vise Actuation | Pneumatic | Pneumatic |
| Vise Type | Self-Centering | Self-Centering |
| Jaw Width | 5.906” | 150mm |
| Part Size Range (Inner Clamp) | 0.39 – 4.22” | 10.0 – 107mm |
| Part Size Range (Outer Clamp) | 6.06 – 11.85” | 154 – 301mm |
| Pressure Range | 0-140 psi | 0 – 9.65 Bar |
| Repeatability | +/- 0.0008” | +/- 0.02mm |
| No Air Clamp Force | 1,500lbf | 6,675N |
| Clamp Force at 140psi | 5,850lbf | 26,000N |
| Overall Dimensions (w/o Jaws) | 9.843” x 8.465” x 5.020” | 250mm x 215mm x |
128mm
Required Machine Options
Required Machine Options
| Required?| Notes
Programmable Air (Haas)| Not Required| Slightly Faster Install
Gimbel UMC Rotary Union| Required for UMC’s Only| UMC’s Only
Air Vise Ready (Haas)| Alternative to Gimbel UMC Union| UMC’s Only
Relays Available on Machine| At Least One Required| One relay and M-code
required
Gimbel Automation 150mm Air Vise Force Graph
Spindle Gripper Construction
Spindle Gripper Construction
| Material
Vise Body| Blued Steel
Vise Slides| Hardened Steel
Inner Spacer| Anodized Aluminum
Hard Jaws| Hardened Steel
Soft Jaws| 6061 Aluminum
These specifications and data may vary slightly from lot to lot or as Gimbel Automation changes or improves designs. This data is for guidance only, and Gimbel Automation makes no representations about the extent to which this data is accurate. All data was experimentally corrected from on-hand equipment. Depending on the type of available equipment and the type of automation machinery, testing methodology may vary. The information herein should not be used to determine design or specification limits – you should always conduct your own testing to verify that the equipment being used fits the needs to safely satisfy your application. Gimbel Group, Gimbel Automation, and any subsidiaries or affiliates thereof make no warranties of any kind, express or implied, including but not limited to the fitness of components for a particular use or specification, merchantability, or mechanical properties
LAYOUT DRAWING
150mm Air Vise Layout Drawing
Self-Centering Air Vise (150mm)
150mm Hard Jaw Layout Drawing
Self-Centering Air Vise (150mm)