MAXIM LIGHTING 25220 Lucas Single Sconce with Switch Instructions
- August 18, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 25220 Lucas Single Sconce with Switch
Product Information
- Item/Model Number: 25220 Lucas Single Sconce with Switch
- Lamping | Ampoule: [1] x[E26 Medium] [60W] (Not Included)
- Country of Origin: Made in China | Fabrique en Chine | Hecho en China
Specifications
- Model Number: 25220
- Type: Single Sconce with Switch
- Lamping: [1] x[E26 Medium] [60W] (Not Included)
- Power Source: Electric
- Country of Origin: China
Product Usage Instructions
Parts Included
- A – x1
- B – x1
- C – x2
- D – x3
- E – x2
- F – x1
- G – x2
Installation Steps
- Before starting, ensure all parts are included as listed above.
- Consult a qualified electrician for installation.
- Follow the diagram on Page 4 for correct assembly.
FAQ
-
Q: Can I use a higher wattage bulb than 60W?
A: It is not recommended to use a bulb higher than the specified wattage as it may damage the fixture. -
Q: Is the sconce suitable for outdoor use?
A: This sconce is intended for indoor use only and is not recommended for outdoor applications. -
Q: Can I install the sconce without the help of an electrician?
A: It is highly recommended to consult a qualified electrician for safe and proper installation of the sconce.
Item/Model Number: 25220
Lucas Single Sconce with Switch
Lamping : “[1] x[E26 Medium] [60W] (Not Included)”
Please consult a qualified electrician prior to install
Made in China
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to install it.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Risk of suffocation! Keep packaging materials away from children.
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock! Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Check the product cord to be sure is free torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
- Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
- Periodically (every 90-180 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
PARTS
Before getting,started, ensure the package contains the following components: