Ufesa CE7238 Cafetera Espresso Cream User Manual
- September 21, 2024
- UFESA
Table of Contents
Ufesa CE7238 Cafetera Espresso Cream User Manual
WE WOULD LIKE TO THANK YOU FOR CHOOSING UFESA. WE HOPE THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.
WARNING
Please read the instructions for use carefully before using the product. store
these in a safe place for future reference.
DESCRIPTION
- Connection pilot light
- Heating pilot light (for coffee and steam function)
- Control knob
- Coffee/hot water selection
- Steam position
- Steam knob
- Water tank
- Water tank cover
- Removable shelf
- Drip tray
- Steam wand
- Frothing nozzle
- Press bar (press Steel mesh with it when pouring Coffee residue to avoid it’s slipping out)
- Funnel handle
- Metal funnel
- Stainless Steel mesh
- Measuring spoon and tamper
- On/off button
SAFETY INSTRUCTIONS
If the supply cord is damaged it must be replaced by the manufacturer, its
service agent, or similarly qualified persons to avoid a hazard. This
appliance can be used by children aged 8 years and above if they have been
given supervision or instruction concerning the use of the appliance in a safe
way and if they understand the hazards involved. Cleaning and user maintenance
shall not be made by children unless they are older than 8 and supervised.
Keep the appliance and its cord out of reach of children
aged less than 8 years.
Appliances can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning the use of the appliance in a safe way
and understand the hazards involved.
Children shall not play with the appliance. This appliance is intended to be
used in households. It is not intended to be used in applications such as:
- staff kitchen areas in shops, offices, and other working environments;
- farmhouses;
- by clients in hotels, motels, and other residential-type environments;
- bed and breakfast type environments.
- Proceed according to the maintenance and cleaning section of this manual for cleaning.
- Never immerse the appliance in water or any other liquid.
- The appliance is only to be used with the stand provided
- During brewing and after use due to residual heat, some parts of the machine are hot.
- Warning: potential injury from misuse!
IMPORTANT WARNINGS
Any incorrect use or improper handling of the product shall render the
warranty null and void. Before plugging in the product, check that your mains
voltage is the same as the one indicated on the product label. The main
connection cable must not be tangled or wrapped around the product during use.
Do not use the device, or connect and disconnect to the supply mains with the
hands and/or feet wet. Do not pull on the connection cord to unplug it or use
it as a handle.
Never use your coffee machine without water in it.
Unplug the product immediately from the mains in the event of any breakdown or
damage and contact an official technical support service. To prevent any risk
of danger, do not open the device. Only qualified technical personnel from the
brand´s Official technical support service may carry out repairs or procedures
on the device. B&B Trends, S.L. disclaims all liability for damages that may
occur to people, animals, or objects, for the non-observance of these
warnings.
INSTRUCTIONS FOR USE
Before use
Make sure that all the product’s packaging has been removed. Before making
coffee for the first time, we recommend using the coffee maker twice with
water only, to clean the system. The appliance will be turned off after 25
minutes. If you want to continue using the appliance, please press the
“on/off” button (18) to switch the appliance off, then press the “on/off”
button (18) again to switch the appliance on, then you can use the appliance
normally. Filling with water The water tank (7) must be filled with water
before turning the appliance on. Remove the detachable tank, open its cover
(8), and fill the tank. Never fill beyond the level “MAX”. Close the cover.
Replace the tank with the appliance properly.
Preheating
To make a cup of good hot espresso coffee, we recommend you preheat the appliance before making coffee, including the funnel, mesh, and cup, so that the coffee flavor cannot be influenced by the cold parts. Select the one-cup or two-cup mesh (16) and place it (without adding coffee) into the metal funnel (15). Pull the press bar (16) backward and make sure that the funnel aligns with the groove in the water outlet. Then insert the funnel into the water outlet from the “Insert” position and fix it firmly by turning it counterclockwise until it is at the “lock” position (Fig.1). Place a cup on the removable shelf (9).
Make sure that the control knob (3) is in the “OFF” position. Connect the appliance to the power supply. Press the on/off button (18), the connecting pilot light will be on. Once the ready light is on, the warm-up cycle is completed. Turn the control knob to the left to make the pump work. Hot water will flow out through the funnel to the cup. After a time, when you consider that the parts are already pre-heated, turn the control knob to the off position to stop the water flow.
Make Espresso Coffee
Add ground coffee to the steel mesh (16) with the measuring spoon (17). Then
press the grounded coffee tightly with the tamper (17). A spoonful of grounded
coffee can make about a cup of top-grade coffee. Pull the press bar (13)
backward and place the corresponding steel mesh (16) for one or two cups into
the metal funnel (15).
Make sure that the funnel aligns with the groove in the water outlet. Insert
the funnel into the water outlet from the “Insert” position and fix it firmly
by turning it counterclockwise until it is at the “lock” position (Fig.1).
Place a cup on the removable shelf (9).
Turn the control knob to the coffee/hot water position to prepare coffee as
needed. To stop the coffee flow, turn the control knob to the off position.
Warning: Do not leave the coffee maker unattended while making coffee
while operating. After finishing making the coffee, take the metal funnel out
by turning it clockwise, and then pour the coffee residue out with the steel
mesh pressed by the press bar. Let them cool down completely, then rinse under
running water.
Frothing milk / Making Cappuccino
You get a cup of cappuccino when you top up a cup of espresso with frothing
milk. Prepare espresso first according to the “MAKE ESPRESSO COFFEE” section.
Fill a jug with about 100 grams of milk for each cappuccino to be prepared.
You are recommended to use whole milk at refrigerator or room temperature (not
hot!).
Note: it is recommended that the diameter of the jug is not less than
70±5mm, and bear in mind that the milk increases in volume by 2 times, make
sure the height of the jug is enough. Turn the control knob to the right
(steam position). Make sure the steam knob is at the min position. Wait until
the heating light is in the on position. Insert the frothing nozzle into the
milk about two centimeters, froth milk in the way moving the vessel around
from up to down.
Turn the steam knob (6) slowly counterclockwise. Steam will come out from the
frothing nozzle (12).
Note: Never turn the steam knob rapidly, as the steam will accumulate
rapidly in a short time which may increase the potential of the risk of
spillage. When the frothing operation is finished, turn the steam knob to the
min position.
Note: Clean the frothing nozzle (12) with a wet sponge immediately after
the steam stops generating, but care not to hurt! Pour the frothed milk into
the espresso prepared. Now the cappuccino is ready. Sweeten to taste and if
desired, sprinkle the froth with a little cocoa powder. Press the “on/off”
button (18) to switch the appliance off.
Note: we recommend allowing the coffee maker to cool down at least for 5
min before making coffee again. Otherwise burnt odor may occur in your
espresso coffee.
Producing hot water
With this function, you can pre-heat your coffee cup to ensure that the
temperature of the coffee will not decrease. To improve the coffee flavor.
Clean your coffee cup. After drinking coffee, you can directly make hot water
with this coffee maker to clean the cups. This makes it more simple and
convenient to clean the cups. Press the on/off button.
Make sure that the steam and the control buttons are respectively on the
minimum and Off position. The pilot light will be illuminated and wait until
the heating pilot light changes color. Turn the steam knob slowly anti-
clockwise and then turn the on/off control knob to the left (coffee position)
and hot water will flow out from the steam wand. When the required quantity is
reached, turn the control knob to the “OFF” position. Press the “on/off”
button to switch the appliance off.
Note: At first the hot water will scatter from the steam wand. May let
the steam wand outlet close to the
coffee cup wall. Thus at this moment, you need to pay attention to the
protection of hot water splash burns skin.
Producing steam to heat liquids
Make sure that the control knob is in the “OFF” position. Press the “on/off”
button to switch the appliance on. Wait until the heating light changes color.
Dip the wand into the liquid to be heated. Turn the steam knob slowly
counterclockwise. Steam will come out from the wand. When the desired
temperature is reached, turn the steam knob to the min position. Press the
“on/off” button to switch the appliance off.
MAINTENANCE AND CLEANING
Do not forget to remove the plug from the socket before cleaning the appliance. Wipe outside with a soft dry cloth when the coffee machine is wet, never use metal polish. The removable items should be washed in hot soapy water. Rinse them before fixing them. Detach the metal funnel by turning it anticlockwise, and get rid of the coffee residue inside, then you can clean it with cleanser, but at last, you must rinse it with clear water. Never use a dishwasher to clean any parts of the machine. Put the coffee maker in a dry and not very hot place.
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and
electronic devices, known as WEEE (Waste Electrical and Electronic Equipment),
and provides the legal framework applicable in the European Union for the
disposal and reuse of waste electronic and electrical devices. Do not dispose
of this product in the bin, go to the electrical and electronic waste
collection center closest to your home.
ALAVA
01012 VITORIA
REPARACIONES BERNA
DOMINGO BELTRAN, 54
945 248 198
bernaabetxuko@yahoo.es
Download PDF:Ufesa CE7238 Cafetera Espresso Cream User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>