MOREFINE KT-M9 Mini PC Windows 11 Pro,12th Gen User Manual

MOREFINE KT-M9 Mini PC Windows 11 Pro,12th Gen

Product Specifications

• Email: sales01@sz-botu.com
• Interference: The equipment is designed to minimize interference for optimal operation.
• FCC Compliance: The equipment complies with FCC radiation exposure limits for uncontrolled environments.
• Minimum Distance: The equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Product Usage Instructions

Installation:

1. Place the equipment on a stable surface away from direct sunlight or moisture.
2. Ensure a minimum distance of 20cm between the radiator and your body during installation.
3. Connect the necessary cables and power source according to the provided manual.

Operation:

1. Power on the equipment using the designated power button.
2. Follow the user manual for specific instructions on operating the equipment.
3. Monitor for any interference during operation and adjust the setup if necessary.

Maintenance:

1. Regularly clean the equipment with a soft, dry cloth to prevent dust buildup.
2. Avoid using harsh chemicals or solvents for cleaning to prevent damage to the equipment.
3. Refer to the user manual for any specific maintenance requirements or troubleshooting tips.

Reminder

When you turn on the computer for the first time, please do not connect it to Ethernet or connect to Wi-Fi, this can avoid some settings to make this computer enter Windows faster.

• The update of Windows will take some time, please wait patiently for the process to be completed; please do not cut off the power during the process to prevent damage to system files and your files.
• If you need to use the USB Type-C port to connect a monitor, please connect the monitor to your device before powering on your device.
• Manage display language settings in Windows.

The display language you select changes the default language used by Windows features, such as Settings and File Explorer.

1. Select the Start button> Settings> Time & Language> Language.
2. Choose a language from the Windows display language menu, or, under Preferred languages, select Add a language to install the one you want if it isn’t listed.

PACKAGE CONTENT

Product display

USING INSTRUCTION

Connect your device to a power source

Tum on the computer

Setting Up Windows for the RrstTime / Windows

Check you-speaker output

Installing the M.2 SSD / M.2 SSD

1. Place the mini PC on a flat stable surface, push the top cover forward, and lift the top cover from the left side.
2. The SATA cable is connected to the motherboard. Do not remove this cable.
3. Remove the round screw from the slot inside the mini PC.
4. Align and insert the M.2 SSD into its slot inside the mini PC.
5. Gently push down the M.2 SSD on top of the screw hole and fasten it using one of the bundled round screws.
6. Place the mini PC on a stable and fiat surface and put the top cover back on the mini PC.

Installation instruction may vary depending on model

Installing memory modules

Installing memory modules

1. Place the mini PC on a flat stable surface, push the top cover forward, and lift the top cover from the left side.
2. Your mini PC comes with two S0-DIMM memory slots that allow you to install two DDR4 S0-DIMMs. Align and insert the memory module into the slot and press it down until it is securely seated in place. Repeat the same steps to install the other memory module.
3. Place the mini PC on a stable and flat surface and put the top cover back on the mini PC.

Steps for back of display mount/

Steps for wall mount

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

1. this device may not cause harmful interference,
2. this device must accept

CAUTION: any interference received, including interference that may cause undesired operation.

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Frequently Asked Questions

• Q: What should I do if I experience interference while using the equipment?
  • A: If you encounter interference, try adjusting the placement ofthe equipment to minimize external factors causing interference. Ensure that there is a distance of at least 20cm between the radiator and your body as recommended.
• Q: How can I verify the FCC compliance of the equipment?
  • A: The FCC compliance information should be available in the product documentation or labeling. Make sure to check for any specific guidelines provided by the manufacturer regarding FCC regulations.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>