BOSCH RM3 Electric Swivel Stand Smart Remote Control Laser Instruction Manual
- June 14, 2024
- Bosch
Table of Contents
BOSCH RM3 Electric Swivel Stand Smart Remote Control Laser
Safety Instructions
All instructions must be read and observed. The integrated safeguards may be
com-promised if the rotating platform and re-mote control are not used in
accordance with these instructions. STORE THESE IN-
STRUCTIONS IN A SAFE PLACE.
-
Have the rotating platform and remote control ser-viced only by a qualified repair person using only ori-ginal replacement parts. This will ensure that the safety of the rotating platform and remote control is maintained.
-
Do not operate the rotating platform or remote con-trol in explosive atmospheres, such as in the presence of flammable liquids, gases or dusts. Sparks may be produced in the rotating platform and remote control, which can ignite dust or fumes.
Keep the magnetic accessories away from implants and other medical devices, e.g. pacemakers or insulin pumps. The magnets in the accessories generate a field that can im-pair the function of implants and medical devices. -
Keep the magnetic accessories away from magnetic data storage media and magnetically-sensitive devices. The effect of the magnets in the accessories can lead to irreversible data loss.
Product Description and Specifications
Please observe the illustrations at the beginning of this oper-ating manual.
Intended Use
RM 3 Rotating Platform
The rotating platform is intended for positioning and aligning the laser lines
of measuring tools. The rotating platform can be controlled using the RC 2
remote control or a smart-phone.
The rotating platform is suitable for indoor use.
RC 2 Remote Control
The remote control is intended for controlling the RM 3 rotat-ing platform.
The remote control is suitable for indoor use.
Product Features
The numbering of the product features refers to the repres-entation of the
products on the graphic pages.
Rotating Platform
-
Measuring tool connection indicator
-
Sensor for remote control
-
Magnet
-
Guide rail
-
Electrical connection to the measuring tool
-
Rotating platform
-
Height adjustment screw
-
Fine adjustment screw
-
Sensor for measuring tool connection
-
1/4″ tripod mount
-
Serial number
-
Holder fastening slot
-
Holder
-
Ceiling clip
-
Guide groove on the measuring tool
Remote control -
Infrared beam outlet aperture
-
Button for quick anticlockwise rotation
-
Button for slow anticlockwise rotation
-
Button for gradual anticlockwise rotation
-
Button for gradual clockwise rotation
-
Button for slow clockwise rotation
-
Button for quick clockwise rotation
-
Battery compartment cover
-
Battery compartment cover locking mechanism
-
Serial number
Technical Data
| Rotating platform | RM 3 |
|---|---|
| Article number | 3 601 K92 8.. |
| Operating temperature | –10 °C to +50 °C |
| Storage temperature | –20 °C to +70 °C |
| Max. altitude | 2000 m |
| Relative air humidity max. | 90 % |
| Pollution degree according to IEC 61010-1 | 2A) |
| Weight according to EPTA-Proced- ure 01:2014 | 0.46 kg |
| Protection rating | IP54 (dust and splash-proof) |
- A) Only non-conductive deposits occur, whereby occasional tem-porary conductivity caused by condensation is expected.
For clear identification of your rotating platform, see the serial number (11) on the type plate.
| Remote control | RC 2 |
|---|---|
| Article number | 3 601 K69 C.. |
| Working rangeA) | 20 m |
| Operating temperature | –10 °C to +50 °C |
| Storage temperature | –20 °C to +70 °C |
| Max. altitude | 2000 m |
| Relative air humidity max. | 90 % |
| Pollution degree according to IEC 61010-1 | 2B) |
| Batteries | 3 × 1.5 V LR3 (AAA) |
| Weight according to EPTA-Proced- ure 01:2014 | 0.05 kg |
- A) The working range may be reduced by unfavourable environ-mental conditions (e.g. direct sunlight).
- B) Only non-conductive deposits occur, whereby occasional tem-porary conductivity caused by condensation is expected.
For clear identification of your remote control, see the serial number (25) on the type plate.
Assembly
Rotating Platform Power Supply
The rotating platform is powered by the mounted measuring tool.
Remote Control Power Supply
Using alkali-manganese batteries is recommended to oper-ate the remote
control.
To open the battery compartment cover (23), press on the locking mechanism
(24) and remove the battery compart-ment cover. Insert the batteries.
When inserting the batteries, ensure that the polarity is cor-rect according
to the illustration on the inside of the battery compartment.
Always replace all the batteries at the same time. Only use batteries from the
same manufacturer and which have the same capacity.
- Remove the batteries from the remote control when not using it for longer periods. The batteries can cor-rode and self-discharge during prolonged storage in the remote control.
Mount the measuring tool on the rotating platform
Place the measuring tool with the guide groove (15) on the guide rail (4) of
the rotating platform (6) and slide the meas-uring tool as far as it will go
onto the platform.
To disconnect the measuring tool, pull it off the rotating plat-form in the
opposite direction.
Roughly align the rotating platform horizontally using the height adjustment
screws (7). Mount the holder and BM 3 ceiling clip
Insert the holder (13) into rails on the bottom of the rotating platform until
you hear it click into place. Pull the holder out of the rotating platform to
remove it.
You can use the magnets of the mounted holder (13) to at-tach the rotating
platform to the ceiling clip (14). Keep your fingers away from the rear side
of the mag-netic accessory while attaching the accessory to sur-faces. The
strong pulling force of the magnets may jam your fingers.
Rotating Platform Positioning Options
You can use the rotating platform as follows:
- Standing on a flat surface,
- With the holder (13) screwed onto a vertical surface,
- With the holder (13) and ceiling clip (14) attached to crown mouldings,
- With the holder (13) attached to magnetisable materials,
- With the 1/4″ tripod mount (10) screwed onto a commer-cially available 1/4″ tripod (not shown).
Keep your fingers away from the rear side of the mag-netic accessory while attaching the accessory to sur-faces. The strong pulling force of the magnets may jam your fingers.
Operation
- Protect the rotating platform and remote control against moisture and direct sunlight.
- Do not expose the rotating platform or remote control to any extreme temperatures or variations in temper-ature. For example, do not leave them in a car for exten-ded periods of time. In case of large variations in temper-ature, allow the rotating platform and the remote control to adjust to the ambient temperature before putting them into operation.
Starting Operation of the Rotating Platform
Once a measuring tool has been switched on and has suffi-cient voltage, the
measuring tool connection indicator (1) will light up and the rotating
platform will be ready for opera-tion.
The rotating platform cannot be used without a measuring tool.
Starting Operation of the Remote Control
The remote control will only work if it is fitted with batteries that are
sufficiently charged.
Set up the rotating platform in such a manner that the signals of the remote
control can directly reach one of the
sensors (2). If the remote control cannot be pointed directly at a sensor, the
working range will be reduced. By reflecting the signal (e.g. against walls),
the working range can be im-proved even for indirect signals.
Aligning the Measuring Tool with the Rotating Platform
Manual Rotation
Rotate the measuring tool mounted on the rotating platform into the required
position by hand or using the fine adjust-ment screw (8).
Rotation with the Remote Control
You can choose between the following movements:
-
Quick clockwise rotation:
Press and hold the button for quick clockwise rotation (22). -
Quick anticlockwise rotation:
Press and hold the button for quick anticlock-wise rotation (17). -
Slow clockwise rotation:
Press and hold the button for slow clockwise rotation (21). -
Slow anticlockwise rotation:
Press and hold the button for slow anticlock-wise rotation (18). -
Gradual clockwise rotation:
Press and hold the button for gradual clockwise rotation (20). -
Gradual anticlockwise rotation:
Press and hold the button for gradual anticlock-wise rotation (19).
Rotation with a Smartphone
For information about remotely controlling the measuring tool and rotating
platform using a smartphone, please refer to your measuring tool’s instruction
manual.
Working Advice
Note on Gradual Alignment Over Short Distances
To ensure precise positioning of the laser line even over large distances, the
rotating motion for gradual rotation is very small. The shorter the distance
between the laser and the target, the smaller the effect of the laser rotating
motion.
Note on Precise Positioning
If you cannot precisely align the laser line with a reference point, rotate
the platform back a little and try again. If you still cannot hit the target,
reduce the distance between the measuring tool and the target.
Maintenance and Service
Maintenance and Cleaning
Keep the rotating platform and remote control clean at all times.
Do not immerse the rotating platform or remote control into water or other
fluids.
Wipe off any dirt using a damp, soft cloth. Do not use any de-tergents or
solvents.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-ing maintenance and
repair of your product as well as spare parts. You can find explosion drawings
and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions
about our products and their accessories.
In all correspondence and spare parts orders, please always include the
10‑digit article number given on the nameplate of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a
product in need of servicing or repair. Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
Electrical and electronic equipment, batteries, accessories and packaging
should be sorted for environmentally friendly recycling.
Do not dispose of electrical and electronic equipment and batteries in the
household waste!
Only for EU countries:
According to the Directive 2012/19/EU on waste electrical and electronic
equipment and its transposition into national law, electrical and electronic
equipment that are no longer usable, and, according to the Directive
2006/66/EC, defect-ive or drained batteries must be collected separately and
disposed of in an environmentally correct manner.
If disposed incorrectly, waste electrical and electronic equipment may have
harmful effects on the environment and human health, due to the potential
presence of hazardous substances.
Only for United Kingdom:
According to Waste Electrical and Electronic Equipment Reg-ulations 2013
(2013/3113) and the Waste Batteries and Accumulators Regulations 2009
(2009/890), electrical and electronic equipment that is no longer usable must
be collec-ted separately and disposed of in an environmentally friendly
manner.
EU Declaration of Conformity
We declare under our sole responsibility that the stated products comply with
all applicable provisions of the directives and regulations listed below and
are in conformity with the following standards.
**Technical file at: ***
Rotating platform Article number
RM 3 3 601 K92 800 2006/42/EC
2014/30/EU
2011/65/EU
EN 61010-1:2010+A1:2019
EN 55032:2015+A11:2020+A1:2020
EN 55035:2017+A11:2020
EN IEC 63000:2018
- Robert Bosch Power Tools GmbH
(PT/ECS)
70538 Stuttgart
GERMANY
Henk Becker
Chairman of
Executive Management
Helmut Heinzelmann
Head of Product Certification
Robert Bosch Power Tools GmbH, 70538 Stuttgart, GERMANY
Stuttgart, 11.01.2022
We declare under our sole responsibility that the stated products comply with all applicable provisions of the regulations listed below and are in conformity with the following standards.
Technical file at: Robert Bosch Ltd. (PT/SOP-GB), Broadwater Park, North Orbital Road, Uxbridge UB9 5HJ, United Kingdom
The Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012
EN 61010-1:2010+A1:2019
EN IEC 61326-1:2021
EN IEC 63000:2018
Robert Bosch Power Tools GmbH, 70538 Stuttgart, Germany represented (in terms of the above regulations) by
Robert Bosch Limited, Broadwater Park, North Orbital Road,
Uxbridge UB9 5HJ, United Kingdom
Vonjy Rajakoba
Managing Director – Bosch UK
Martin Sibley
Head of Sales Operations and Aftersales
Robert Bosch Ltd. Broadwater Park, North Orbital Road, Uxbridge UB9 5HJ, United Kingdom, as authorised representative acting on behalf of Robert Bosch Power Tools GmbH, 70538 Stuttgart, Germany
Place of issue: Uxbridge Date of issue: 20/01/2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>