redbeat C1 Tablet User Manual
- September 21, 2024
- Redbeat
Table of Contents
redbeat C1 Tablet
Product Information
Specifications:
- Model: Tablet C1
- Manufacturer: Shenzhen Redbeat Technology Co., Ltd.
- SAR Level: 1.521W/kg
- Compliance: FCC Part 15, CE-RED, Radio Equipment Directive 2014/53/EU
Product Box Content:
- Tablet (Battery integrated in the device)
- Charger
- USB Cable
- User Manual
General View:
In this user manual, the specifications given in the visuals and the parts
indicated in the box contents may differ according to the model. The images
are representative.
Troubleshooting:
If you detect an unusual condition on your device, refer to the
troubleshooting section in the user manual for solutions.
Disposal of your device:
Dispose of your device in an environmentally friendly manner. Do not treat
it as household waste. Follow recycling guidelines provided by your local
municipality or waste disposal service.
Suggestions for Energy Saving:
To save energy, turn off features like Wi-Fi and Bluetooth when not in use.
Adjust brightness and volume settings to conserve energy efficiently.
FCC Warning:
This device complies with part 15 of the FCC Rules. Ensure proper operation
to avoid harmful interference.
RF Exposure Statement:
The Tablet C1 meets SAR compliance requirements and government standards
for exposure to radio frequency waves. The highest reported SAR level is
1.521W/kg when used near the body.
Contact Information:
Manufacturer: Shenzhen Redbeat Technology Co., Ltd. Address: Room 302,
Building 27, Qiaocheng East Street, Xiangshan Street Community, Shahe Street,
Nanshan District, Shenzhen
Product Usage Instructions
-
Powering On/Off:
To power on the tablet, press and hold the Power button (4) until the device starts up. To power off, press and hold the same button and follow on- screen prompts. -
Adjusting Volume:
Use the Volume buttons (1) to increase or decrease the sound output of the tablet.
Frequently Asked Questions (FAQ)
-
Q: How do I charge the tablet?
A: Use the provided charger and USB cable to connect the tablet for charging. Ensure the battery is integrated into the device. -
Q: How can I insert a SIM card or TF card?
A: Locate the SIM & TF Card slot (6) on the tablet and carefully insert the cards as per the instructions in the user manual.
User Manual
TabletC1
Technical Specifications
- Processor: SC9863A
- Operating System : Android 14
- RAM : 3GB DDR
- Storage : 64GB
- Screen: 8inch 800×1280
- Display: IPS Screen and 10 points touch screen
- Music: MP3, AAC, AAC+, AMR-NB,etc.
- Video: MP4, OGM, 3GP, AVI. Etc
- Picture: JPG, JPEG, GIF, BMP, PNG, etc.
- Battery: 4000mAh, 3.8V
- Adapter: TYPE-C Charging, 5V, 2A
- Camera: Front 5.0 MP, Rear 8.0 MP
- Wi-Fi: 2.4G
- Bluetooth: BT4.2
- Ports: Micro TF/Micro SIM/Type-C, 3.5mm Headphone
- Temperature: -10℃~45℃
Specifications and this manual are subject to change without prior notice.
- Conforms to AEEE directive.
This product complies with the European CE Directives 2014/53 / EU (Electromagnetic Compatibility Directive).
This device complies with the Directive on Control of Waste Electrical and Electronic Equipment.
Google, Android, Google Play and other brands Google Inc. is the trademark of the foundation.
Product Box Content
Tablet (Battery integrated in the device), Charger, USB Cable, User Manual
General View
In this user manual, the specifications given in the visuals and the parts
indicated in the box contents may differ according to the model.
The images are representative.
- Volume +/Volume –
- Front Camera
- Mic hole
- Power button
- Rear Camera
- SIM & TF Card slot
- Speaker
- Speaker
- TYPE-C port
- Headphone
Troubleshooting
If you detect an unusual condition on your device, you can try to solve the problem in the description of the table.
PROBLEM | REASON | SOLUTION |
---|---|---|
Tablet no LAN/Wifi connect. | Incoming signal is too low | May the signal is |
weak or bad. If you are on the ground, signal reception may be reduced.
Change another place and try again.
Skip touchscreen| May your hands wet, tablet software or touch screen can not
find touch operation.| While touching the touch screen, make sure it is dry.
If the touch screen is scratched or If it is damaged, contact us.
Intermittent lockups or Tablet stops responding| May too many applications
under operating| Press and hold the power button for 5 seconds. If the tablet
does not turn off then press the Reset button located near SD card slot.
Tablet beeps and the battery icon blinks Blinking| Your battery is weak| To
continue using the device, recharge.
Tablet camera head error message Giving| There is not enough memory or the
battery is weak.| Charge the battery. Transferring files to a PC, or open up
some space by deleting some files in memory.
My Tablet does not turn on out of the box| Low power| Plug the AC Adapter into
the wall and connect to the Tablet. The tablet should now power on. Vuca times
recommends to charge the device for 8 hours before first use.
For a device that is completely discharged, leave it plugged in and turned
off for at least 12 hours.
Unable to make a connection to your Compute r| Compatible with USB jack
or PC latest version drivers not loaded| If you are using the USB cable with
your
device make sure it is compliant.
Your PC has the right drivers installed and be sure to update it.
Disposal of your device in an environmentally friendly manner This symbol on the product or on its packaging indicates that the product must not be treated as household waste. Instead of and delivered to the current collection point which recycles electronic equipment.
This product is correct, you will be able to prevent the potential negative consequences of environmental and human health arising from waste treatment of the product. Recycling of materials will help to conserve natural resources. For more information about recycling this product, please contact your local municipality, the household waste disposal service or the shop where you purchased the product.
Suggestions for Energy Saving
When you do not use it, turn off the device like wi-fi, blue Bluetooth. If necessary, disable unnecessary sounds such as application notifications and key sounds. Depending on what you need, reducing the brightness and volume will enable you to use energy efficiently.
Proper Battery Disposal
(For countries with separate collection systems) The marking on the battery, the guide and the luggage compartment indicate that this pile of battery should not be disposed with other household waste. Hg, Cd or Pb chemical symbols indicate that the battery contains mercury, cadmium or lead above the reference values specified in EC Directive 2006/66. The battery supplied with this product can not be changed by the user. For detailed information on replacement, please contact your service provider. Do not try to remove the battery or throw it into the fire. Do not disassemble, crush or punch. If you intend to dispose of the product, necessary measures will be taken in the field of waste
FCC warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC warning
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The Tablet C1 has been tested for body-worn Specific Absorption Rate (SAR)
compliance. The FCC/IC has established detailed SAR requirements and has
established that these requirements. RF Exposure Information The radio module
has been evaluated under FCC Bulletin C95.1 and IEC/IEEE 62209-1528 and found
to be compliant to RF Exposure from radio frequency devices. This model meets
the applicable government requirements for exposure to radio frequency waves.
The highest reported SAR level for usage near the body (0mm) is 1.44W/kg.
CE Requirements:
- (Simple EU declaration of conformity) declares that the radio equipment typeis in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU .
- Restriction Information
This product can be used in EU countries and regions, including Belgium (BE), Bulgaria (BG), Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy(IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE) and United Kingdom (UK).
For the warning information of the frequency restriction, please refer to the package or manual section.
RF Exposure Statement
The Tablet C1 has been tested for body-worn Specific Absorption Rate (SAR)
compliance. The CE-RED has established detailed SAR requirements and has
established that these requirements.
This model meets the applicable government requirements for exposure to radio
frequency waves. The highest reported SAR level for usage near the body (0mm)
is 1.521W/kg,
we, Shenzhen Redbeat Technology Co., Ltd.
(Room 302, Building 27, Qiaocheng East Street, Xiangshan Street Communi-ty,
Shahe Street, Nanshan District, Shenzhen) as the manufacturer, hereby declares
under our sole responsibility that product(s): Tablet
Model name: C1
is in conformity with the essential requirements of the Radio Equipment
Directive 2014/53/EU:
Art. 3.2 Radio :
- ETSI EN 300 328 V2.2.2 (2019-07),
- ETSI EN 301 511 V12.5.1 (2017-03),
- ETSI EN 301 908-1 V15.2.1 (2023-01),
- ETSI EN 301 908-2 V13.1.1 (2020-06),
- ETSI EN 301 908-13 V13.2.1 (2022-02),
- ETSI EN 303 413 V1.2.1 (2021-04)
Art. 3.1(b) EMC:
- ETSI EN 301 489-1 V2.2.3 (2019-11),
- ETSI EN 301 489-17 V3.2.4 (2020-09),
- ETSI EN 301 489-19 V2.2.1 (2022-09),
- ETSI EN 301 489-52 V1.2.1 (2021-11)
- EN 55032:2015/A1:2020,
- EN 55035:2017/A11:2020
- EN IEC 61000-3-2:2019/A1:2021,
- EN 61000-3-3:2013/A2:2021
Art. 3.1(a) Safety :
- IEC 62368-1:2018
- EN IEC 62368-1:2020+A11:2020
Art. 3.1 (a) Health:
- EN 50566:2017& EN 62209-2:2010+
- A1: 2019 EN 50663:2017& EN 62479:2010
Frequency Band(s):
- WIFI(2.4G): 2412MHz -2472MHz Band Bluetooth: 2402-2480MHz
- GSM 900 : Tx: 880-915MHz, Rx: 925-960MHz
- GPS Receiver: 1575.42MHz
Transmit Power Range(s):
- Bluetooth (BLE): 0.32dBm
- Bluetooth(EDR): 6.84dBm
- WIFI2.4G: 16.87dBm
Warranty
Dear user, thank you for using the product of our company.
Please read and keep properly the warranty card after purchasing the product
so that we can provide better services to you.
- User Information
- User’s name
- Phone Number
- Address
- Sales Information
- Purchase Date
- Invoice Number
- Sales Unit
- Phone Number
- Address
- Product Information
- Product Model
- Product IMEI Number
Warranty(Customer Copy)
Dear user, thank you for using the product of our company.
Please read and keep properly the warranty card after purchasing the product
so that we can provide better services to you.
- User Information
- User’s name
- Phone Number
- Address
- Sales Information
- Purchase Date
- Invoice Number
- Sales Unit
- Phone Number
- Address
- Product Information
- Product Model
- Product IMEI Number
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>