Satel APT-200 Bidirectional Keyfob User Guide
- September 21, 2024
- Satel
Table of Contents
Satel APT-200 Bidirectional Keyfob User Guide
Full manuals are available on www.satel.pl
Changes, modifications or repairs not authorized by the manufacturer shall
void your rights under the warranty.
There is a danger of battery explosion when using a different battery than
recommended by the manufacturer, or handling the battery improperly.
Be particularly careful during installation and replacement of the battery.
The manufacturer is not liable for the consequences of incorrect installation
of the battery.
The used batteries must not be discarded, but should be disposed of in
accordance with the existing rules for environment protection.
For description of adding and configuring the keyfobs, refer to the ABAX 2 / ABAX system controller manual / INTEGRA 128-WRL control panel user manual.
Pressing the keyfob button will:
- generate a beep,
- turn on the buttons backlight (not applicable to APT-210),
- make the LEDs blink three times,
- send a radio transmission to the controller / alarm control panel.
If the button will be pressed for 20 seconds, the keyfob will turn off to save
battery power.
After the transmission is sent, the keyfob is waiting for an answer from the
controller / control panel. Having received the system state information, the
keyfob will present it by means of LEDs. You can get information about the
system state after pressing any button (the button does not have to start any
function).
For more information about the keyfob, refer to the full manual.
Hereby, SATEL sp. z o.o. declares that the radio equipment type APT-200 / APT-210 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.satel.pl/ce
SATEL sp. z o.o.
ul. Budowlanych 66; 80-298 Gdansk, POLAND
tel. +48 58 320 94 00; www.satel.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>