DINUY CONFIGURE App Instruction Manual
- September 24, 2024
- DiNUY
Table of Contents
DINUY CONFIGURE App
Product Information
Specifications
- Compatible Detectors: DM TEC B3B/B3N/B3P and DM TECB1B/B1N/B1P
- Operating Modes: Motion Detector, Presence Detector, Twilight Switch
- Timing Range: 1 second to 1 hour
- Brightness Range: Disabled, 5 to 2000 Lux
- Sensitivity Levels: Very Low, Low, Medium, High, Very High
Product Usage Instructions
- Download the DINUY Configure app from the Google Play Store or Apple App Store.
- Open the app, log in, and select DETECTORS.
- If it’s your first time accessing DINUY CONFIGURE, register as a new user (internet connection required).
- Press the + NEW TEMPLATE button to create a new template with the default configuration.
- Edit the template parameters in the BASIC Menu as needed.
- Save the template or continue to DETECTORS SETUP.
- Press IDENTIFY to establish visual contact with a specific detector.
- Edit and name the detector as desired.
- Select detectors and press SEND to apply settings.
- DISABLE: Function to disable settings
- RESEND: Resend configuration if needed
Tips
- Edit detector names for quick identification.
- Create and save templates for different scenarios for quick application of settings.
FAQ
- Q: Can the DINUY Configure app be used by anyone?
- A: The app is recommended for exclusive use by installers or authorized personnel.
- Q: What are the compatible detectors for configuration?
- A: Compatible detectors include DM TEC B3B/B3N/B3P and DM TEC B1B/B1N/B1P.
INSTRUCTION MANUAL
Ref. APP DINUY CONFIGURE
- This app allows you to configure one or any combination of the following DINUY detectors: DM TEC B3B/B3N/B3P and DM TEC B1B/B1N/B1P, in the following operating modes:
- Motion Detector;
- Presence Detector;
- Twilight Switch.
- The DINUY CONFIGURE application allows intuitive and quick configuration of detectors. This configuration is done through templates that can be edited, saved and duplicated.
- The use of the configuration App is recommended for exclusive use by the installer or authorized installation personnel.
APP INSTALLATION
- Download the configuration App:
- Play Store: DINUY configure (Android)
- App Store: DINUY configure (iOS)
- Once you have downloaded the DINUY Configure app from the Google Play Store or Apple App Store, open the app, log in and select DETECTORS. If this is the first time you access DINUY CONFIGURE, you must Register as a new user.
Important! Internet connection is required for registration.
CREATION OF NEW TEMPLATE
- To create a first template press the “+ NEW TEMPLATE” button.
- This template has a default configuration. If you do not want to edit, press SAVE and go on with the DETECTORS SETUP (3 STEPS) section.
- If you decide to edit, in each template you can modify the following configuration parameters:
BASIC Menu:
- Operating mode:
- Motion Detector.
- Presence Detector.
- Twilight Switch.
- Timing: Between 1 second and 1hour.
- Brightness: Disabled, or between 5 and 2000 Lux.
- Sensitivity: Very low, Low, Medium, High, Very High.
ADVANCED Menu:
-
Bluetooth Active Time: This is the time that the Bluetooth will be open once you power the 230V~ detector or send the parameter settings to the detector. After this time the Bluetooth will be automatically deactivated. This time can be selected from 10 minutes to 4 hours.
- Factory setting 2 hours.
-
Relay polarity:
- Factory setting: NO.
- NO: Normally open when the relay is idle. When people are present, the relay closes and activates the lighting.
- NC: Normally closed when the relay is idle. When people are present, the relay opens and deactivates the lighting (ultraviolet lamps and germicides).
-
Lock Code: For greater security (default, Deactivate):
- Activate: Enter a 4-digit code to lock the detector.
- Deactivate: It does not have a lock code.
-
Additional security with Lock Code.
-
The configuration of each template will be applied to the detectors you choose. You can create as many templates as the operating modes you need.
-
Each template has buttons to edit its name, edit settings, delete and duplicate
DETECTORS SETUP (3 STEPS)
To configure the detectors, you will need to create a new template or use an
existing one. Next:
STEP 1: SEARCH FOR DEVICES
- Press the SEARCH button (see the button indicated in the following Image) on the template whose configuration you want to apply.
- This action locates nearby detectors with Active Bluetooth:
IMPORTANT: By default, the detectors’ Bluetooth will be Active for 2 hours after receiving power. If you cannot locate the detectors, try disconnecting and then reconnecting the power to the detectors from the mains..
- You Will see all the devices that are in the range with Active Bluetooth, and that can be configured:
STEP 2: UNIQUE IDENTIFICATION
- Press the IDENTIFY button to establish visual contact with a specific detector. A red LED will start flashing on that detector and the app will also identify that device with a flashing red dot.
- In addition, the detector can be edited and named as desired.
STEP 3: APPLY SETTINGS
-
Next, select the detectors to which you want to apply these settings and press SEND:
-
If the device configuration has been completed correctly, a confirmation message will appear
-
The “Completed” message confirms that the detector has received the configuration of that template correctly.
-
In addition, there is another confirmation with the double flashing of the luminaires that have been connected to the detector.
USEFUL FUNCTIONS: “DISABLE ” and “RESEND”
- It is recommended to know the following functions that the application offers from the SENT CONFIGURATION screen and that allow a more agile and comfortable configuration of the installation.
- These buttons will be visible once a configuration submission has been made:
DISABLE
The DISABLE function allows you to disconnect immediately Active Bluetooth
from one or more detectors once configured and before the time set by default
(2 hours) or set in the configuration (ADVANCED MENU) elapses.
- This function makes the detectors already configured invisible and allows you to view only the detectors that remain configured and that maintain Bluetooth Active.
- To turn off Active Bluetooth for one or more detectors, select those detectors once you receive the CONFIGURATION SENT confirmation and press “DISABLE ”.
RESEND
- The RESEND function is useful when, for some reason, you have made an attempted configuration submission, but the configuration submission has not completed successfully. In this way, a new communication attempt can be made with that device without having to locate it again or exit this screen.
- This situation may occur, for example, once the configuration process has started if you have moved away from or changed your position to one of the detectors you intend to configure. Select the detectors that have not been configured correctly and press RESEND
- Si este proceso no tiene efecto, pruebe a iniciar el proceso de CONFIGURACIÓN DE LOS DETECTORES de nuevo.
TIPS
- It is recommended to edit the names of the detectors to be able to quickly identify them and speed up their location and configuration.
- The appropriate time to perform this action may be when you have visually IDENTIFIED these detectors during the setup process.
- Try creating and saving several templates for different typical situations, for example: HALLWAYS, WORK AREA, LANDING, etc.
- This way, when you go to the installation, you can apply these settings quickly.
ADDITIONAL SECURITY WITH “LOCK CODE”
-
The Code Lock function of the detectors (ADVANCED MENU) provides additional security to prevent access to the detector configuration by unauthorized persons or people outside the installation.
-
If you activate the Lock Code, you must enter a 4-digit code.
-
Once the Lock Code is active, you must use this same code to access any configuration parameter of this template and the detectors that are associated with this configuration.
-
The use of this Code Lock is recommended for specific cases, for example, to avoid possible situations of vandalism. It is recommended that this Code Lock function be used prudently and, if used, also remember and write down this code in a safe place, available to authorized installation personnel.
-
IMPORTANT: After three (3) incorrect attempts to enter the lock code, the application suggests that you contact the manufacturer to retrieve the forgotten or lost code.
-
If you find yourself in this situation, please contact DINUY:
PROBLEM RESOLUTION
- When a detector and/or the DINUY Configure App stops working correctly, review possible failures and suggested solutions in The following table will help you solve the problem:
CONTACT
If you find yourself in this situation, please contact DINUY:
- Telephone: + 34 943 627 988
- Email: support@dinuy.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>