Classic SUS304 Multifunctional Electric Steamer User Manual

Classic SUS304 Multifunctional Electric Steamer User Manual

Appointment function

Operation

Press the “Start/Cancel” key, and press  or to adjust the working time. Then long press “Keep Warm/Appointment” key for 3 seconds to enter the appointment mode. The default appointment time is 5 hours, and the work will be completed at the appointment time countdown stops.

Appointment time adjustment

Press the function key or to adjust the time from 1 hour to 24 hours, (long press to fast forward)

Cancellation of work

Press the “Start/Cancel” key again in the working state to cancel the work and return to the standby state. The digital control panel displays the alarm “Er3”, indicating that there is no water, and all functions cannot be operated (except the “Start/Cancel” key). When the alarm displays “Er3”, press the “Start/Cancel” key, it will return to the standby state. Add some water, and press the “Start/Cancel” key to restart the work.

Cleaning and Maintenance

1. The power must be unplugged before cleaning;
2. Be careful to avoid residual heat burns, please clean the product after cooling;
3. Do not use chemicals for wiping;
4. Do not use steel balls or hard tools to scrub the surface of the product;
5. Do not wash the bottom directly;
6. After cleaning the product, wipe off the remaining water stains with a dry cloth, and place it in a cool place to air dry;
7. Do not expose the product and its accessories to the sun;
8. It is normal for scale or other traces left on the bottom after use. You can use 500ml of water and add about 15ml of white vinegar after the product is used, boil the water and cool it down, pour out the hot water and clean the bottom with a cloth, then rinse with water. If the scale is serious, increase the amount of white vinegar appropriately and repeat the operation.

Fault Analysis And Treatment

is tightly insertion place
2| Product not working| Product failure| Please send to the designated maintenance point for inspection.
3| Food not steamed well| Cooking time is too short| Please refer to the food cooking menu on the control panel to set the steaming time
4| Food not steamed well| Too little water on the heating plate| The product is in anti-dry-burn protection. Add more water to cook again.
5| Control panel showsEr311| Over temperature protection or anti-dry-burn protection| Stop heating and return to standby state automatically after troubleshooting.

Food Content List

 Product Parameter

Rated voltage/Frequency: 220V/50Hz
Rated power: 800W
Capacity: 24L

Product Accessories

Strictly Prohibit: Risks resulting in danger to persons, serious injury, and substantial property damage should be avoided;

• This product is suitable for home use and is strictly prohibited for commercial use. The user must use it strictly according to the instructions of the manual, and it is forbidden for individuals to disassemble and assemble the machine without any instructions;
• It is strictly forbidden to put the machine into water or other liquids, nor to wash it under water or other liquids to prevent electric leakage or damage to electrical components;
• It is strictly forbidden to place this product near high temperature, strong magnetism, flammable and explosive gas (such as natural gas, biogas, etc.) to prevent device damage, failure or fire.

Warn: Be alert to risks that may result in danger to persons, serious injury, and substantial property damage;

1. The product should be stored in a place that is not easily accessible by children. Do not allow people (including children) with physical or mental  disabilities, or lack of relevant experience and knowledge, to use or play this product; 2
2. Do not plug or unplug the power plug with wet hands to avoid electric shock,
3. Do not use this product unattended;
4. Please operate this product on a water platform, do not operate this product on fabrics such as carpets, towels, and flammable materials such as plastic and paper;
5. Do not use accessories and accessories other than this product, so as to avoid fire and personal injury; when this product is heated, be careful to be scalded by the steam sprayed from the vent of the product;
6. Do not put the accessories of this product into the disinfection cabinet or dishwasher for cleaning to avoid deformation and damage;
7. If the power cord is damaged, it must be repaired or replaced by the manufacturer or professionals in similar departments in order to avoid danger;
8. When adding water/not in use/cleaning/moving, the power must be disconnected.

Note: Be aware of the risk of possible personal injury or property damage.

1. This product is a Class 1 electrical grounding wire is well grounded appliance, in order to prevent leakage, please ensure that the before installation; risk of possible personal injury or property damage. Class 1 electrical appliance, in order to prevent leakage, please ensure that the well grounded before installation;
2. The input voltage of this product is 220V-50Hz. Before connecting the product to the power supply, please check whether it is consistent with the local power supply voltage. Higher or lower voltage will damage the components. In order to avoid losses, it is recommended to use a voltage stabilizer; This product is a grounding wire is
3. Before cleaning any part of this product, in order to prevent leakage or accidental activation, be sure to unplug the power plug;
4. Before use, please check whether the power cord, plug and other parts are damaged. If any damage found, please stop using. is
5. Temperature control protection: When heating in anhydrous state, the double anti-dry-burn protection function of the product is activated. The product will stop heating to prevent burnout;
6. When the anti-dry-burn protection occurs, please pull out the power plug from the socket and let it down naturally before it can be used normally. Do not use cold water directly to cool, so as not to reduce the service life of the heating system. Do not use wet hands to operate the power supply, and pay attention to good contact; the parts and materials of this product that come into contact with the ingredients meet food grade standards, which is clean and reliable.

Operation panel

Instructions

1. Clean parts with tap water before use.
2. Place the base on a flat table stably.
3. Add an appropriate amount of water. (Warning: Do not exceed the maximum water level)
4. Plug the power cord into the 220V AC power supply, the buzzer beeps and displays”—“, indicating it is in standby state.

Start Using

Operation

Press the “Start/Cancel” key, the indicator light will start to work after flashing for 3 seconds, and the default 800W will work continuously for 20 minutes. Display “P800” means 800W, “00:20” means countdown for 20 minutes, display “End” means the end of the function.

Time Adjustment

Press the function key or to adjust the time from 10 minutes to 1 hour, (long press to fast forward)

Cancellation of work

Press the “Start/Cancel” key again in the working state to cancel the work and return to the standby state

Keep Warm function

Operation

Press the “Start/Cancel” key, then press the “Keep Warm/Appointment” key to enter the keep warm mode. In this mode, the default cycle is to work at 500W for 20 seconds and stop for 40 seconds until the end of the work. Display “b0:30” means keep warm for 30 minutes and display “End” means the end of the function.

Time Adjustment

Press the function key or to adjust the time from 10 minutes to 12 hours, (long press to fast forward)

Cancellation of work

Press the “Start/Cancel” key again in the working state to cancel the work and return to the standby state.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>