NXP Semiconductors PCAL9722HN Evaluation Board User Manual
- September 20, 2024
- NXP Semiconductors
Table of Contents
PCAL9722HN Evaluation Board
“`html
Product Information
Specifications:
-
Product Name: PCAL9722HN-ARD Evaluation Board
-
Model: UM12075
-
Features: 22-bit general purpose I/O expander via SPI
interface -
Compatibility: Most microcontroller families
-
Platform: Microsoft Windows 7, 8, 10 PC platform
Product Usage Instructions:
1. Introduction:
The PCAL9722HN-ARD evaluation board is designed for testing the
PCAL9722HN, a 22-bit general purpose I/O expander. It allows remote
I/O expansion for various microcontroller families through the SPI
interface. The board can be used alongside other SPI-bus demo
boards for evaluation purposes.
2. Features:
The PCAL9722HN-ARD evaluation board offers the following
features:
- 22-bit general purpose I/O expander
- Remote I/O expansion for microcontroller families
- Industry standard SPI-bus port communication
- Compatible with Windows 7, 8, and 10 PC platform
3. Getting Ready:
Before using the PCAL9722HN-ARD evaluation board, ensure you
have the following:
- Kit contents as per the package
- Additional hardware if required
- Windows PC workstation with necessary software installed
3.1 Kit Contents:
The kit should contain all necessary components for operating
the evaluation board.
3.2 Additional Hardware:
Any extra hardware required for specific applications should be
prepared in advance.
3.3 Assumptions:
Familiarity with the SPI-bus is beneficial but not mandatory for
using this evaluation board.
FAQ:
Can I use the PCAL9722HN-ARD evaluation board with any
microcontroller family?
The board is designed to provide remote I/O expansion for most
microcontroller families via the SPI interface.
What operating systems are compatible with the evaluation
software?
The evaluation software runs on Microsoft Windows 7, 8, and 10
PC platforms.
“`
UM12075
PCAL9722HN-ARD evaluation board
Rev. 1.0 — 13 June 2024
User manual
Document information
Information
Content
Keywords
PCAL9722HN, ultra low-voltage translating 22-bit SPI I/O expander with Agile I/O features, interrupt output and reset
Abstract
The PCAL9722HN-ARD evaluation board is easy to test and designed for the PCAL9722HN which is a 22-bit general purpose I/O expander that provides remote I/O expansion for most microcontroller families via the SPI interface. The PCAL9722HN-ARD uses the LPC55S69-EVK MCU board to provide an easy to use evaluation platform.
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
IMPORTANT NOTICE
For engineering development or evaluation purposes only
NXP provides the product under the following conditions:
This evaluation kit or reference design is for use of ENGINEERING DEVELOPMENT
OR EVALUATION PURPOSES ONLY.
It is provided as a sample IC pre-soldered to a printed circuit board to make
it easier to access inputs, outputs, and supply terminals. This evaluation kit
or reference design may be used with any development system or other source of
I/O signals by connecting it to the host MCU or computer board via off-the-
shelf cables. Final device in an application will be heavily dependent on
proper printed circuit board layout and heat sinking design as well as
attention to supply filtering, transient suppression, and I/O signal quality.
The product provided may not be complete in terms of required design,
marketing, and or manufacturing related protective considerations, including
product safety measures typically found in the end device incorporating the
product. Due to the open construction of the product, it is the responsibility
of the user to take all appropriate precautions for electric discharge. To
minimize risks associated with the customers’ applications, adequate design
and operating safeguards must be provided by the customer to minimize inherent
or procedural hazards. For any safety concerns, contact NXP sales and
technical support services.
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 2 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
1 Introduction
The PCAL9722HN-ARD evaluation board features a 22-bit general purpose I/O
expander that provides remote I/O expansion for most microcontroller families
via the SPI interface. The board can be connected in parallel with other SPI-
bus demo boards to create an evaluation system.
The IC communicates to the host via the industry standard SPI-bus port. The
evaluation software runs under Microsoft Windows 7, 8, and 10 PC platform.
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 3 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
2 Features
· A complete evaluation platform for the PCAL9722HN, Ultra low-voltage
translating 22-bit SPI I/O expander with Agile I/O features, interrupt output
and reset
· Easy to use GUI based software demonstrates the capabilities of the
PCAL9722HN · On-board LEDs, 7 segment display and key switches for PCAL9722HN
general purpose I/O evaluation. · Convenient test points for easy scope
measurements and signal access · USB interface to the host PC · Power supply
from USB port or external power supply can be used to power PCAL9722HN-ARD
evaluation
board
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 4 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
3 Finding kit resources and information on the NXP web site
NXP Semiconductors provides online resources for the evaluation board and its
supported device(s) on http:// www.nxp.com.
The information page for PCAL9722HN-ARD evaluation board is at
http://www.nxp.com/PCAL9722HN-ARD. The information page provides overview
information, documentation, software and tools, parametric, ordering
information and a Getting Started tab.
The Getting Started tab provides quick-reference information applicable to
using the PCAL9722HN-ARD evaluation board, including the downloadable assets
referenced in this document.
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 5 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
4 Getting ready
Working with the PCAL9722HN-ARD evaluation board requires the kit contents, additional hardware, and a Windows PC workstation with installed software.
4.1 Kit contents
· Assembled and tested evaluation board in an antistatic bag · Quick Start
Guide
4.2 Additional hardware
In addition to the kit components, the following hardware is necessary or
beneficial when working with this kit.
· Oscilloscope · Multimeter for current/voltage measurement · PC for running
GUI
4.3 Assumptions
Familiarity with the SPI-bus is helpful but not required.
4.4 Static handling requirements
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling. You must use a ground strap or touch the PC case or other grounded source before unpacking or handling the hardware.
4.5 Minimum system requirements
· PC Pentium processor (or equivalent) · One USB port (either 3.0 or 2.0 or
1.1 compatible) · Windows 7, 8, 10 · OM13089 MCU board (from www.nxp.com)
4.6 Power requirements
The LPC55S69-EVK MCU board obtains power from the PC USB port, two USB parts
can be connected to the LPC55S69-EVK MCU board simultaneously. Please use
external power supply option if exceeding the USB port current capabilities.
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 6 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
5 Hardware installation
5.1 PCAL9722HN-ARD EV board and LPC55S69-EVK MCU board connection
PCAL9722HN-ARD evaluation board is connected to the LPC55S69-EVK MCU board
using four connectors (J4/J5/J11/J12 on PCAL9722HN-ARD board and
P16/P17/P19/P18 on LPC55S69-EVKboard) for SPI-bus and power supply. The
LPC55S69-EVKMCU board communicates with PCAL9722HN demo GUI through PC USB
port and uses SPI to communicate to PCAL9722HN.
Figure 1.PCAL9722HN-ARD evaluation board
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 7 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
Use P10 (USB micro-B connector) on LPC55S69-EVK for power supply and GUI communication port. Figure 2.PCAL9722HN-ARD evaluation board connecting to the LPC55S69-EVK MCU board
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 8 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
6 Hardware description
· J4/J5/J11/J12 are connected to the LPC55S69-EVKMCU board for PCAL9722HN-ARD
power supply and SPI-bus interface.
· JP1 selects user LED on/off. · JP2 selects internal or external +5V power
supply. · JP3 selects internal or external VDD_SPI power supply. · JP4 selects
internal or external VDD_P power supply.
Table 1.PCAL9722HN-ARD EV board main components
Device
Description
PCAL9722HN
I3C, SPI-bus, 0.5 °C accuracy, digital temperature sensor
7 segment display
Displaying number
NCP117ST33T3G
5V to 3.3V LDO
Red LED
Power supply on LED
Location U3 D11 U1 D10
Table 2.Jumper settings
Jumper
Default setting
J4, J5, J11, J12
J1
J2, J3
J6, J7, J13, J8, J9, On J14, J10, J15
J16
J17
J18
1-2
J19
J20
1-2
J23
1-2
J24
1-2
J21, J22, J25, J26, 1-2 J27, J28, J29, J30
J31
J32
2-3
J33
J34, J35, J36, J37, 1-2 J38, J39
JP1
1-2
JP2
2-3
JP3
2-3
JP4
2-3
Comment Arduino connector External 5V power supply pins Ground test pins User
LED current measurement pins
External VDD_SPI power supply pins External VDD_P power supply pins SPI CS 0-2
select pins Port 0 and 1 test pins SCK test pin SDIN test pin SDOUT test pin 7
segment display test pins
Port 2 test pins ADDR select pin External MCU connector Key switch test pins
User LED on/off select pin Internal or external +5V power supply select pin
Internal or external VDD_SPI power supply select pin Internal or external
VDD_P power supply select pin
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 9 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
7 Schematic
The schematic diagram of PCAL9722HN-ARD is available at URL:
http://www.nxp.com/PCAL9722HN-ARD.
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 10 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
8 PCAL9722HN demo GUI
8.1 Install PCAL9722HN-ARD Demo GUI
· Double click on “setup.exe” to install PCAL9722HN-ARD demo GUI. · Click
“Next” button three times to complete installation.
8.2 Run PCAL9722 Demo GUI on Windows 7, 8, and 10 PC
1. Double click on “PCAL9722 Demo” icon to start GUI.
2. Select proper COM port (last COM port normally) and click “Connect” button to connect LPC55S69-EVK board.
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 11 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
3. Use Setting tab to select SPI speed, and click on the “Init Board” button.
4. Use Register tab “Read Register button” to read out PCAL9722 internal register data and “Save to File” button to save data in a file.
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 12 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
5. Use 7 Segment Display tab to run number up/down on display automatically, or select fix number to be shown on display.
6. Use LED tab to set GPIO drive strength and turn on/off 8 LEDs.
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 13 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
7. Use Switch tab to set input port latch, polarity, pull-up/down settings, and read button to read in key switch statue.
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 14 / 21
NXP Semiconductors
9 Abbreviations
Table 3.Abbreviations
Acronym
Description
ESD
Electro Static Discharge
GUI
Graphical User Interface
SPI-bus
Serial Peripheral Interface bus
IC
Integrated Circuit
LED
Light Emitting Diode
PC
Personal Computer
USB
Universal Serial Bus
UM12075
PCAL9722HN-ARD evaluation board
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 15 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
10 References
1. PCAL9722HN, Ultra low-voltage translating 22-bit SPI I/O expander with
Agile I/O features, interrupt output and reset; NXP Semiconductors
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 16 / 21
NXP Semiconductors
11 Revision history
Table 4.Revision history Document ID
UM12075 v.1.0
Release date 13 June 2024
Description · Initial version
UM12075
PCAL9722HN-ARD evaluation board
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 17 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
Legal information
Definitions
Draft — A draft status on a document indicates that the content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included in a draft version of a document and shall have no
liability for the consequences of use of such information.
Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors. In no event shall NXP Semiconductors be
liable for any indirect, incidental, punitive, special or consequential
damages (including – without limitation lost profits, lost savings, business
interruption, costs related to the removal or replacement of any products or
rework charges) whether or not such damages are based on tort (including
negligence), warranty, breach of contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance with
the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — NXP Semiconductors products are not designed, authorized
or warranted to be suitable for use in life support, life-critical or safety-
critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected to
result in personal injury, death or severe property or environmental damage.
NXP Semiconductors and its suppliers accept no liability for inclusion and/or
use of NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification. Customers are
responsible for the design and operation of their applications and products
using NXP Semiconductors products, and NXP Semiconductors accepts no liability
for any assistance with applications or customer product design. It is
customer’s sole responsibility to determine whether the NXP Semiconductors
product is suitable and fit for the customer’s applications and products
planned, as well as for the planned application and use of customer’s third
party customer(s). Customers should provide appropriate design and operating
safeguards to minimize the risks associated with their applications and
products. NXP Semiconductors does not accept any liability related to any
default, damage, costs or problem which is based on any weakness or default in
the customer’s applications or products, or the application or use by
customer’s third party customer(s). Customer is responsible for doing all
necessary testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Terms and conditions of commercial sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at https://www.nxp.com/profile/terms, unless otherwise agreed in a valid
written individual agreement. In case an individual agreement is concluded
only the terms and conditions of the respective agreement shall apply. NXP
Semiconductors hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of NXP Semiconductors
products by customer.
Export control — This document as well as the item(s) described herein may be
subject to export control regulations. Export might require a prior
authorization from competent authorities.
Suitability for use in non-automotive qualified products — Unless this
document expressly states that this specific NXP Semiconductors product is
automotive qualified, the product is not suitable for automotive use. It is
neither qualified nor tested in accordance with automotive testing or
application requirements. NXP Semiconductors accepts no liability for
inclusion and/or use of non-automotive qualified products in automotive
equipment or applications. In the event that customer uses the product for
design-in and use in automotive applications to automotive specifications and
standards, customer (a) shall use the product without NXP Semiconductors’
warranty of the product for such automotive applications, use and
specifications, and (b) whenever customer uses the product for automotive
applications beyond NXP Semiconductors’ specifications such use shall be
solely at customer’s own risk, and (c) customer fully indemnifies NXP
Semiconductors for any liability, damages or failed product claims resulting
from customer design and use of the product for automotive applications beyond
NXP Semiconductors’ standard warranty and NXP Semiconductors’ product
specifications.
Translations — A non-English (translated) version of a document, including the
legal information in that document, is for reference only. The English version
shall prevail in case of any discrepancy between the translated and English
versions.
Security — Customer understands that all NXP products may be subject to
unidentified vulnerabilities or may support established security standards or
specifications with known limitations. Customer is responsible for the design
and operation of its applications and products throughout their lifecycles to
reduce the effect of these vulnerabilities on customer’s applications and
products. Customer’s responsibility also extends to other open and/or
proprietary technologies supported by NXP products for use in customer’s
applications. NXP accepts no liability for any vulnerability. Customer should
regularly check security updates from NXP and follow up appropriately.
Customer shall select products with security features that best meet rules,
regulations, and standards of the intended application and make the ultimate
design decisions regarding its products and is solely responsible for
compliance with all legal, regulatory, and security related requirements
concerning its products, regardless of any information or support that may be
provided by NXP. NXP has a Product Security Incident Response Team (PSIRT)
(reachable at PSIRT@nxp.com) that manages the investigation, reporting, and
solution release to security vulnerabilities of NXP products.
NXP B.V. — NXP B.V. is not an operating company and it does not distribute or
sell products.
Trademarks
Notice: All referenced brands, product names, service names, and trademarks
are the property of their respective owners.
NXP — wordmark and logo are trademarks of NXP B.V.
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 18 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
Tables
Tab. 1. Tab. 2.
PCAL9722HN-ARD EV board main components ………………………………………………. 9 Jumper settings ………………………………………….9
Tab. 3. Abbreviations ……………………………………………15 Tab. 4. Revision history ………………………………………..17
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 19 / 21
NXP Semiconductors
UM12075
PCAL9722HN-ARD evaluation board
Figures
Fig. 1.
PCAL9722HN-ARD evaluation board …………….7
Fig. 2.
PCAL9722HN-ARD evaluation board connecting to the LPC55S69-EVK MCU board ……………………………………………………….. 8
UM12075
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 13 June 2024
© 2024 NXP B.V. All rights reserved.
Document feedback 20 / 21
NXP Semiconductors
Contents
1
Introduction ……………………………………………… 3
2
Features …………………………………………………… 4
3
Finding kit resources and information
on the NXP web site ………………………………….5
4
Getting ready …………………………………………… 6
4.1
Kit contents ………………………………………………..6
4.2
Additional hardware ……………………………………. 6
4.3
Assumptions ……………………………………………… 6
4.4
Static handling requirements ……………………….. 6
4.5
Minimum system requirements ……………………..6
4.6
Power requirements …………………………………….6
5
Hardware installation ……………………………….. 7
5.1
PCAL9722HN-ARD EV board and
LPC55S69-EVK MCU board connection ……….. 7
6
Hardware description ……………………………….. 9
7
Schematic ………………………………………………. 10
8
PCAL9722HN demo GUI …………………………..11
8.1
Install PCAL9722HN-ARD Demo GUI …………. 11
8.2
Run PCAL9722 Demo GUI on Windows 7,
8, and 10 PC …………………………………………… 11
9
Abbreviations …………………………………………. 15
10
References ………………………………………………16
11
Revision history ………………………………………17
Legal information …………………………………….18
UM12075
PCAL9722HN-ARD evaluation board
Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’.
© 2024 NXP B.V.
For more information, please visit: https://www.nxp.com
All rights reserved.
Document feedback Date of release: 13 June 2024 Document identifier: UM12075
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>