iDO 9606521001 GLOW 560 Base Cabinet Set Instruction Manual

June 3, 2024
iDO

iDO 9606521001 GLOW 560 Base Cabinet Set

Operating and maintenance instruction

Glow
400/ 1 door 500/ 1 door 560/ 2 doors
9606121 001/301(L) 9606321 001/301 9606521 001/301
9606221 001/301(R)
9606631 001 9606731 001 9606831 001
Index

Drawings

Installation

Cleaning and Care Instruction

Bathroom furniture and mirror cabinets
  • Bathroom furniture should be cleaned with a soft dry cloth. Avoid using abrasive materials or anything sharp.
  • To remove stubborn dirt a damp cloth with warm water and a mild household cleaning agent can be used. Always dry surfaces thoroughly after cleaning.
  • Furniture should not be cleaned with agents containing acids or solvents. Abrasive cleaners and furniture polish should also be avoided.
  • Avoid direct contact between furniture and water.
  • Never leave the furniture surfaces wet or damp for long periods of time.
  • Any spilt chemicals such as decalcifying agents, nail polish remover, hair dyes etc. should be wiped clean immediately.
  • Furniture with scratches and/or cracks in lacquered, veneer or laminate surfaces are less resistant to water and should be treated with more care.
Furniture color
  • Furniture color may vary slightly from the color of the sample.
  • Lacquered and veneer surfaces are subject to aging and their color may change over time.
  • Continuous exposure to UV radiation (such as direct sunlight) may accelerate any color change.

The quality and appearance of the furniture is best preserved if the bathroom is efficiently ventilated and the temperature maintained at between +15°C and +30°C. The furniture is resistant to fluctuations in air humidity; however direct contact with water may adversely affect its appearance, structure and functionali-ty. Therefore, direct exposure to water should be avoided.
Product defects resulting from inappropriate cleaning and use, or resulting from prolonged contact with water, do not constitute a basis for complaint.
IDO’s bathroom furniture is produced from materials which meet very high standards of quality and moisture resistance. Cabinets, doors and shelves are produced in moisture-resistant MDF and chipboard and are recycled as surface- treated wood. Fittings, metal handles and screws are sorted and recycled as metal.

Geberit International
AG Schachenstrasse 77, CH-8645
Jona documentation@geberit.com
www.geberit.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals